How to enable the wireless adapter to Ad-Hoc networks.

Similar Questions

• Equium A110-252: how to enable the wireless function?

  Hi, first time ive been on this forum. I recently bought the toshiba satellite (think that's the spelling) and a wireless router. now, the router works well with my other computer, is very fast, but I can't go online with the laptop. all the info I get, is that the wireless is not activated? its got beat me, so I hope someone out there can help me to solve the problem, so I can start using my laptop in the room. Thanks in advance. Susi

  Hello Susi

  The first use of WLAN switch and move it to THE post. The WLAN control light should be on. After this check in If Device Manager card is correctly registered.

  The last step is to use the FN + F8 key combination to activate and enable the wireless network adapter. When activated the WLAN connection must be configured correctly. I assume that your camera comes with WLAN client utility. If you use this utility to configure the WIFI connection, please ensure that this WLAN Windows option is disabled.

• Satellite P750 - 02K - how to enable the wireless interface?

  Hello

  I just bought a new laptop Satellite P750 / 02K with Windows 7 64 bit. How can I enable the wireless interface?

  I tried the Fn + F8, but it says it all, this is the 'wireless communication is disabled. Please activate the wireless communication switch. There is no switch that I see. The device driver is enabled and active. I even tried to reinstall the driver. The user manual makes no reference to a process physical either pass. I checked the BIOS but see no setting for all the wireless settings. I tried to restart the flash without result map.

  Any suggestions? Thank you.

  Hey Buddy,

  I Don t Satellite P750 in front of me, but the wireless network card is in the Device Manager?

  On Satellite P750, there is a tactile button between the screen and the keyboard to turn the WLAN function. The second button on the left (symbol of the antenna), you need to press to activate the WLAN.

  Also, check the BIOS. As I know most notebook contains an option for the WLAN that must be set to active.

• How to activate the wireless adapter

  I currently have a HP Pavilion 17 computer laptop with Windows 7 Professional.  A few times in the past in the unit's wireless adapter stopped working.  I don't remember what I did to get it working again, then however at this time I can not activate even if I followed all the steps to change the settings of the adapter on the network and sharing Center.  When I select Connect, it simply shows that it is not connected.  Nothing I have tried seems to help.  I have a unit of Belkin Wi - Fi that works and my laptop runs as long as I have an Ethernet cable connected.  However if I disconnect the cable from the laptop does not connect via wireless adapter.  In the past he would always stay connected to the Wi - Fi connection even if I disconnected the cable.  Please give me any thoughts you had to solve it.  Thanks in advance for your efforts and help.

  I just wanted to know that I found the solution to my problem with the help of a response of the same issue posted last year.  Repeated pressing the F12 key with the picture of an airplane on the wireless card.  Forgive my ignorance, but thanks to all who took time to try to help me.

  OldmanDon

• How to use the wireless adapter?

  With the help of Windows as the operating system (Vmware Server 2.0) of the host and running Linux as the guest operating system. I would use the adapter wireless on the host machine but can not understand how to operate. Any ideas?

  That is right.  Your comments will STILL see a wired NETWORK card, as it's virtual.  The only way to see a wireless connects directly a USB wireless NETWORK card to your host... and I don't know if they all work.

• How to enable the wireless switch

  original title: wireless switch

  How can I turn my switch on wireless on my Sony Vaio VGC-JS110J model?

  It is the button in the bottom left. I think you tap it, but maybe it's move upwards or downwards.

• Re: Unable to get the wireless adapter to work on my Satellite L550-1CC

  I'm getting bored with this laptop, I reinstalled windows 7 (32 bit) and can not get the wireless adapter to work.

  My router settings are perfect, my netbook is zero connection problems - the router is just inches away from the laptop most of the time - the laptop insists that there is "no available networks."

  This of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.

  Windows automatically installed the wireless network - I thought that could be the problem, so I downloaded the realtek driver directly.

  No difference. Always the small icon with Red Cross barred through it.

  I thought it could have been a hot key problem - so I installed the flash card driver that apparently controls the access keys (for some reason any).

  Shortcut keys still don't work - I could really care about that - it's just the wireless network I need.

  Thanks for any help I receive.

  > my netbook has zero connection problems - the router is just inches away from the laptop most of the time - yet the laptop insists there is "no available networks."
  After reading this sentence, I'm a bit confused. If there is no available WLAN networks how your laptop had zero problems to connect?

  One last thing:
  > Of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.
  What is the difference between the old and the new installation of Windows?

  In general the WLAN use is fairly simple.
  Wireless network card - must be installed correctly (listed in Device Manager
  WLAN card - must be enabled using FN + F8 key combination to activate the wireless network card
  -scan the available WLAN networks area, click on the button of your WLAN and use connect
  -put key WLAN if necessary and after a few seconds WLAN connection will work

  I did this many times on laptops preinstalled Win7 and didn't have any problems. On all laptop computers pre-installed with Toshiba recovery image (factory settings) is not necessary to change the WLAN settings.

• Satellite 5200 903 does not detect the wireless adapter

  Hello everyone,
  I wonder if anyone can switch me to it...
  Since I reinstalled the operating system (my XP pro SP2) PC seems not detecting don't nor the wireless adapter in the device under network adapter Manager.
  Also the light of the flexibility wireless no longer not.
  I also have problems to access the BIOS to check if the card is detected there, have not a Toshiba HW setup in Control Panel as described in the manual.
  Any suggestions?

  Hello Juliana

  The question is how did you install the operating system? If you use the restore CD to install all tools including Toshiba HW setup. If the unit is pre-installed with the Microsoft Windows XP Home edition CD, you must install all the stuff of Toshiba late.

  Just a little explanation about the wireless network card. Basically, if the wireless switch indicator turns not on s clearly indicate on hardware problem. I guess that the wireless card is faulty. Also check if the card is listed in the Device Manager.

  If you want to enter the BIOS settings pres ESC key at the boot routine and keep it down for a few seconds.

  Good bye

• Message: Sell another Application is controlling the wireless adapter

  Does anyone know how to move from one devices (using Configfree) to another wireless? A window opens and reads 'request to sell another control the wireless adapter.

  How do I changed the setting so I can connect to the device that is controlled?

  Thanks, Flopyear

  Hey,.

  To be honest I really don t know what you mean. What is wireless?

  What program tells you this information?

• Message error "another sellers application is controlling the wireless adapter.

  Hello
  I have a satellite A100 309 and I am trying to configure wireless (intel pro wireless 3945 ABG) card using the intel standard configuration tool (windows one does not support it). I have the following error message «another sellers application is controlling the wireless adapter» I guess that there is a conflict with the windows WLAN utility but I don't know how to solve this problem.
  I tried to uninstall and reinstall the driver but no way...
  Someone at - it an idea?
  Thank you very much.
  JF

  I put t know how it works on your device, but I assume that your camera it is preinstalled tool Intel PROSet WLAN. Using this application you can configure WLAN connectivity. Windows operating system also has WLAN configuration settings.

  The fact is that the two who cannot be activated at the same time. If you use Windows settings, you must disable the Intel PROSet. Remember in front of Windows settings, the box is removed.

• HP ENVY x 360-15-u110dx: reset the wireless adapter

  I have a new HP ENVY x 360-15-u110dx and it is not connected to the internet. I have to constantly reset the wireless adapter. What should I do to fix this?

  @pjg31660,

  Hello and thanks for the display on the HP support forums.  Here is a link that should help you solve your problem.

  HP PC - Troubleshooting wireless network and Internet (Windows 8)

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• How to enable the automatic configuration service in Windows XP

  How to enable the automatic configuration service in Windows XP

  Hi SamuelOkon,

  Are you facing any problem on your computer?

  You can follow the steps in this link & check if it helps.

  How to activate the Wireless Auto Configuration startup type?

  Hope the helps of information.
  Please post back and we do know.

• HP officejet 6800 e all on one: how to enable direct wireless printing

  Hello world
  How to enable direct wireless printing because my printer saying me that its disabled and I need to contact s Adminitrator or the person who installed the printer, which is me I did it by myself.
  So what is the solution pleaaaase?

  Hello and welcome to the HP support community!

  Press the "wireless Direct" icon on the control panel for your printer.

  Should look like this:

  If you press and hold down for 3 seconds, it should print the password to your devices (if the security has been selected).

  WyreNut

• Enabling/disabling wireless adapter without administrator rights (Win 7 64 - bit)

  Is there a way to toggle wireless adapter without it as an administrator? Our political laptops where user access is limited and admin password is required to install all the software are submitted. Since the enabling/disabling wireless adapter requires Admin rights, users by default are not able to turn on/off wireless. However, our IT Department has confirmed that their policy has nothing to do with the wireless adapter and it's a setting in Win 7. Is there a solution to this? Thank you.

  There is no control of Windows 7 that will allow a user account Standard toggle the WiFi card.

  A Standard user account is limited to the secondary action of switching on & off WiFi using the F7 / Fn + F5 key or the key it is for the model [a switch is often provided in the dialog box Windows-X as well, "Windows Mobility Center" key].

• Not able to install the wireless adapter built on Tecra 8200

  Hi all

  I have a Tecra 8200

  After you have installed Windows XP Pro, the wireless adapter will be found as PCMCIA MTD-0002.

  I cannot install the drivers for the card of m.

  XP is SP2
  BIOS is 1.60

  Could someone help me what to do, thanks in advance.

  Brgds,

  Thomas

  Hello

  If you have the card WLAN MiniPCI Agere, the system needs to install the following registry key with the WLAN card driver:
  [HKEY_LOCAL_MACHINE es\Pcmcia\Parameters]
  "IrqRouteToPciController" = dword:00000006

  I found a statement of installation:

  1. new installation of Windows XP Service Pack 2 package
  or clean install Windows XP Gold package and install Service Pack 2 update image on it.
  2 copy the TICardBusIrqRouting.reg on the system, and then click the file on the system.
  3. the following window will appear,
  "Are you sure that you want to add the information in xxxxx\DISABL ~ 1.REG in the registry.
  Then select "Yes".
  xxxxx is the location of TICardBusIrqRouting.reg
  4. the next window will appear,
  "Information in xxxxx\DISABL ~ 1.REG have been entered in the register."
  Then click on 'OK '.
  xxxxx is the location of TICardBusIrqRouting.reg
  5 restart the system

  Good luck!
  Good bye