How to ensure that the graph xy plots are present?

Similar Questions

• How to ensure that the graph of the image is registered before you add it to a report?

  Hello!

  I have a VI (comprehensive graphic image recording) that records the image of a graph with an invoke node.

  Then, I set this image in an excel report. However sometimes the image is saved and sometimes not.

  Usually, if I use a probe inside the VI it will save the image.

  I thought that with the wire of the error I will force execution of saving image of chart first and then add it to the report but it seems that is not enough...

  You have no idea why this is happening >

  Thanks in advance!

  Hi jess

  As Global Variables are missing and no data is not able to run and find the root Cause. Always Modiifed the Code. Please run and confirm. I have Modiifed in LV 2015. If you have later please refer png File.

  If his work during the probe. This may be due to timing issue with calling Vi

  Kind regards

  Master of potato

• LTR6.2.1: import function: I imported the 4 JPGs from my iphone. the photos were black. After a while, I found that I had read in the metadata and then had the photos. How to ensure that the metadata is read in the always?

  LTR6.2.1: import function: I imported the 4 JPGs from my iphone. the photos were black. After a while, I found that I had read in the metadata and then had the photos. How to ensure that the metadata is read in the always?

  1. Turn off apply tone auto under Lightroom preferences settings
  2. Restart Lightroom and then import images again.

• Make sure that the products/versions supported are present in the MXI file or CEP manifest when you transfer the zxp to Adobe Exchange

  Hi all

  I was faced with this problem for a long time.

  When I'm uploading my Extension for first pro CC Panel, I get this message from Adobe Exchange.

  Problems have been found with your submission.

  Once you have made the following changes, you can click the Edit (pencil) and re-download your ZXP.

  • Make sure that the products/versions supported are present in the MXI file or a CEP manifest file

  I added

  < Products >

  < produces maxversion = "9.9" name = "First" primary = "true" version = "7.0" / >

  < / product >

  In my mxi file and the ZXP is install correctly in Premiere pro versions CC, 2014 and 2015.

  But when I upload the same ZXP his shows this error.

  When I changed the label of products with details of the document Adobe Exchange forum to test different scenarios [https://www.adobeexchange.com/resources/7#packman]

  < Products >

  < produces maxversion = "8" name = "InDesign" primary = "true" version = "8.0" / >

  < / product >

  ZXP is getting downloaded on Adobe Exchange.

  
  

  Can anyone suggest what to do to download my package with support for Premiere pro zxp versions 7.0 to 9.9?

  
  

  Thanks in advance,

  ANOOP NR
  

  
  

  Thank you watchwithi28270883! I was facing this problem for quite a while now.

  Your solution worked for me also!

• How to ensure that the battery has a long service life?

  Hello!
  I just bought a Toshiba Satellite A80 and I was wondering how can I make sure that my battery will have a long life. It is said that the battery is achieved if it is fully charged, and used the laptop to power grid. Does this mean that I have to take my battery while I'm doing this?
  Thanks for your help!

  [Edited by: admin August 6 05 14:46]

  Hey Niji

  If you need some useful information on the battery and the other parts of your unit, you can visit the site Web of Toshiba.
  I found this site:

  http://EU.computers.Toshiba-Europe.com

  Please go to support & download, then the Knowledge Base.
  This site is very good.

  Good bye

• How to ensure that the binary file is stored in the location specified for my DLL files?

  I'm new to computers and has a Dell Inspiron 1545 laptop with a program in Windows Vista Home Premium on a 64-bit platform. I have a thread in my sidebar gadget new MSNBC and the dates for the stories are frozen in December of last year and does not update the current stories. I had no problem with this before and I haven't added or deleted programs because of this problem to the best of my knowledge. I got advice here on the checking of dll files and 4 of them come back with saying error messages and see that the binary is stored at the specified location for debug files. I searched for information help with this and I found a few tips that not saved and re-entered the files, I tried and different versions of the idea, at first it made no difference and then I redid it and it screwed up my weather gadgets so I redid it and they worked very well. I then tried on the DLLs for the MSNBC gadget, but it doesn't seem to change anything, although the gadget to power for the Dow Jones News feed is now screwed up. Is there a site I can go to what can explain the route of binary/specified path or debug file. Save/re seems to be the right path, it affects obviously the gadgets but not as I want, any help in this direction would be appreciated at. Meanwhile I'll go back and try again.

  Hi dumdeedumdum

  
  What are the files dll are facing problems with?

   

  You can perform a SFC scan and check if the problem is resolved.
  To Perform a Scan SFC -
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• How to ensure that the new RAM will be compatible with my computer?

  Hello

  I have a PC that I want to put a new RAM in. I know how to insert the RAM. But y at - it a chance it will not work and will not work.

  The PC is a desktop computer and Win XP Home. I hope that upgrade to Windows 7 if it is successful. 512 MB of ram currently.

  JK

  Kingston and have all two Crucial fairly complete memory configurators

  http://www.kingston.com/worldwide/default.asp - use the drop-down list upwards to the right called "research paper."

  http://www.crucial.com/?click=true - start with the drop down "select the manufacturer."

  You have your motherboard manual? That should tell you what memory is compatible.

  Or failing that get back to me with your motherboard brand and model or brand of PC and model and I will be able to help.

  Tricky

• Firefox is my Start Page, but when I open a new tab, this one is Bing: how to ensure that the Firefox tabs as well?

  So Firefox is my start page, it's OK. But if I open a new tab Bing rises when I want Firefox (Cuase it swag ' don't stuff) how should I do?

  You can check the browser.newtab.url pref on the topic: config page and set this pref to your preferred the new tab page.

  • the new default tab with the tiles page is on: newtab
  • the default homepage is Subject: Home
  • to a blank page, you can use Subject: vacuum

  The pref browser.newtabpage.enabled must be set to true to use the page defined through browser.newtab.url like the new tab page.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How to ensure that the virus is eliminated

  Hello. I got a Virus / malware that took the details of the Bank and the ID. I ran AVG (free version), windows and spybot programs. Anything else I can do? I just found out that infected emails are sent to addresses in my yahoo account after the execution thereof. Any advice would be greatly appreciated.

  Hello
  Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• How to ensure that the software is legitimate and authentic?

  Hello to all users of the adobe forum hoping that someone out there can help me?

  I'm in the market for a new laptop / second hand and during my research, I discovered a laptop computer for sale...

  and they say that there 'Adobe CS6 Master Collection COMPLETE real and active'

  So when I see the laptop is there a way to confirm that it is indeed the real version and legitimate?

  Another thing I need to know or should consider?

  Thank you very much

  Brian

  The seller must complete and submit the transfer of license documents that

  Adobe:

  http://helpx.Adobe.com/x-productkb/policy-pricing/transfer-product-license.h

  TML

• How to ensure that the value of a control (for example double) initializes the last value when the VI has been closed?

  I use a cluster as a control. I would like to double in this control to automoatically values to fill their last values set when the VI is opened or accessed for the first time. It would be great if someone could point out for me. Thanks in advance!

  In my opinion, the configuration files are the easiest method and the best.  Simply save your last values to the file when your code ends.  At the beginning of your code, to read the file and fill in the controls with the values read.  With the configuration files, the section name can be the name of the cluster, and key names can be control names.

  I know OpenG has some pretty nice to do, but I prefer to use the native functions OR when I can.  When porting to a new system, there is no need to copy any additional screws library (OpenG library).  The native DV come with Labview.

• How to ensure that no data is ever stored on the servers of the low COST airlines?

  In particular, I would like to use the SimpleChat and SharedWhiteboard in a secure application and will not have any data stored on the servers of LCCs (only used to manage the flow of data). At least, I don't want to have data stored between sessions, but the 'sessionDependent' of these two pods property doesn't seem to work (ie. when the value 'true' history of cats and forms of Whiteboard are preserved between sessions).

  I put in a few hooks to clear both at the end of the session and the start of a session, but what I really want, is to ensure that the data never be stored in the first place.

  Is this possible with these pods, or do I need Custom develop something on my own to support this behavior?

  Thank you

  The data are stored only in memory. When "persistent" we check the configuration node and transitional so we don't save this node on the disk.

  If you're really worried about a security breach, you should probably encrypt your messages before you send them through companies low-cost (it should be easy to subclass the current models and encrypt/decrypt points on the fly).

• How to ensure that my computer has microphones and then use them for talking to Cortana?

  How to ensure that my computer has microphones and then use them for talking to Cortana?

  Hi Walter,

  Please start by http://windows.microsoft.com/en-us/windows-10/cortana-privacy-faq

  Also, try to review this tutorial: http://www.tenforums.com/tutorials/4026-cortana-turn-off-windows-10-a.html

  They should help you get started.  Problems specific to the micro (existence, activation, volume,...) will be addressed (more than the troubleshooting steps if Cortana doesn't) that you go through the above; However, a "one-stop-shop" for microphones & recognition recording & speech covering all peripheral aspects are versatile control panel page (see the path in the blue header at the top of the screenshot pictured below for W10Pro 11102).

  Best wishes

  Kosh

  

• How to check that the variable 'does not contain' value?

  Hello

  I use CP 7.0.1.237.

  We want to use the widget text box for a custom quiz and verify a response. While we understood how to check the existence of certain key words, we are not able to find a way to check that the content does NOT contain certain keywords. For example, we want to ensure that the text entered in this widget does not contain a "Transformation" and "Non-compliant.

  Is this possible at all?

  Thank you

  Anthony

  Anthony, it works perfectly. Created this conditional action with 4 decisions. I used the interaction of training text scrolling in CP8 (because now you can control the variable - which means I might have a Reset button):

  First decision:

  

  Second decision (the third is similar to the following)

  

  Fourth and final decision

  

  I put the variable words (v_first... v_fifth), it's a reflex I use since I shared actions that much. The variable associated to the ETB (you can now reset an empty var in CP8) is v_TextArea and the Boolean value that will decide if positive feedback (StarOK) should be shown is v_TA_OK. If you want to display a negative feedback, put this in the ELSE part of the final decision.

  FYI: it took 15 minutes, including the creation of assets and the variables and tests. Personally I would have needed more time to do it in JS, but that's just me.

  Lieve

• I'm trying to scan a doc and the message is 'not found computer. Ensure that the HPsoftware has been installed on the computer.

  I'm trying to scan a doc and the message is 'not found computer. Ensure that the HPsoftware has been installed on the computer. My computer print very well so I do not know why it does not scan.

  Hello

  Thanks for the information. Two things to try. First of all, try to align your print cartridges using the controls on the printer display panel. As part of this process, the printer will print on a sheet of alignment that you place on the printer and scan in the printer. See if it works successfully. If not, see the following page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02451000&cc=us&dlc=en&lc=en&jumpid=reg_r1002_usen_c-001_title_r0011 .

  The second thing to try is the print and Scan Doctor Utility, download here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-114642-1&cc=us&dlc=en&lc=en&os=4063&product=5061082&sw_lang=. Its a standalone process and requires no explanation.

  Let me know if one of them fixes the problem.

  Kind regards

  BearPup