How to ensure the compatibility of Application on different devices like the curve and the storm. ?

Similar Questions

• How to ensure the separation of data from different types of data for ESXi 4?

  Does anyone have a reference architecture to ensure the separation of the point of creating data in transit and storage of different types of dataexample PCI DSS data (personal credit card), data ITAR/EAR, etc.  Concern is due to the mix of data VLAN or crossed, VLAN themselves not to use as a security boundary.  VMware offers to ensure the separation at the application levelif I read it correctlywell in transit even in stockdata must be separated.  Suggestions?

  Hello VMwear8,

  The chances of anyone to play with the hypervisor itself is actually quite thin, what must be addressed is the data accessed in virtual machines. If you need protect administrators to access these data.

  Right now that is not possible to 100%, however you can restrict access by implementing different controls:

  (1) execute all access to your ESX hosts and vCenter via the HyTrust appliance, this is a preventive measure in some cases.

  (2) turn off the navigation data store in the vSphere Client (this is a RBAC vCenter)

  (3) turn off 'root' or superuser for each ESX host (except in a situation of "break the glass"). If they need access 'root' follow it via sudo.

  (4) add the audit in order to know who did what, when, where and how

  (5) protect your management tools as if they were gold. Check out this post performance and security management in the virtual environment tools as an aid to help with this.

  At most you can only put controls around the problem, we can not currently permanently prohibit access to one person give you access as being able to connect as root in the ESX host.

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• How to ensure the backup of Windows 7 starts and runs until the end on a laptop which is mode standby, or could be put in mode 'sleep' when the lid is closed.

  Hello

  Many of us with laptops with Windows 7 would like to ensure that, when a Windows backup is scheduled, it starts successfully and goes to full completion, regardless of whether the phone is first 'sleep', or if the user of the laptop close the lid of the laptop, which would normally the laptop mode 'sleep'.  In other words, how to backup Windows or Windows 7 be configured to wake from mode "sleep" and prevent it from sleep mode, when a backup is scheduled and actively running?

  I saw a way to schedule a task that will wake the computer, but I'm looking for something more intelligent than that.  I'm looking to see if Microsoft has already thought this through and allow you to pre-configure operating system such as we have no additional installation software.

  Thank you

  Dave

  We continued this thread in http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/how-do-i-keep-windows-7-from-sleeping-in-the/9602fbe6-f9d2-461d-88ee-710369e6f543

• How to ensure the background page images display correctly?

  Can someone point me in the direction of any good articles or tutorials that explain how to ensure that background image of page display properly in all (or almost!) browser screen widths?  I'm talking about the kind of images are larger, which fill or almost fill the entire screen - if I size them properly for mine (big portable computer screen), that they be not stretched in the lower screen resolutions.

  Hello

  I downloaded your html (with my changes to css and images here - http://www.pziecina.com/Untitled-1.html.)

  What is the desired effect?

  Regarding the problem with the image resizing in IE, is because IE8 and below require a height for the background image, (not so important with photos but necessary for graphics), otherwise the image when resizing the browser keeps the displayed initial height (see css).

  I also changed the image Center positioning as you have this game to focus on it.

  Css3 background image rules have also been moved under the IEFilters, it is mandatory for IE9, or IE9 would apply to the IEFilter and not the rule css3.

  I would like to know if it works for you.

  PZ

• How to ensure the rman backup is successful?

  Hello
  
  We have scheduled backup rman jobs.
  1. but how do ensure us that all rman backups are successful?
  2. If the rman written directly to tape, how to ensure that all tape backup are successful?
  
  Thank you
  
  Andrew

  Not sure why you were not able to download. I sent you a copy.

  Kind regards
  S.K.

• How to ensure the right Version of the Addon is used?

  Hi all

  Recently built a stand alone application using GTA on a computer by using office 2010 and saw no problem. On the target machine, using a more recent version of Office 2013, I encountered problems.  I note the office and GTA versions because there may be compatibility problems if you use GTA 2011 with office 2013.  Now, I created the application in LV2015 and what I hoped was RGT2015, but I also installed on my computer, RGT2011, LV 2011.

  My question is how can I authenticate that I use RGT2015 in my VI?

  Thanks for any help.

  When you install LabVIEW, you notice that it shows you two directories in which it will install, something like ...\National Instruments\LabVIEW 2016 and Instruments of... \National.  All Version-specific code (addons, modules, VI.lib, User.lib, etc.) go in the folder-specific Version, so you can be sure that if you develop with LabVIEW 2015, you will get the GTA from 2015.  The 'outside' folder is there "independent of the version" stuff such as drivers, MAX, etc. go, and even, if there are Version-specific things, you find subfolders.

  NEITHER seems to do a pretty good job keeping their straight Versions...

  Bob Schor

• QQ: How to ensure the dedicated connection.

  Hi all
  
  Database: 10.2.0.2
  Operating system: oracle enterprise linux 32-bit
  
  Want some help to the solution for the sub questions.
  Questions: "configure your database to manage the connection 360 and ensure 120 dedicated connection is reserved."
  dispatchers by default 5, maximum 15
  shared 10 40 maximum default servers'
  
  one can tell me how I will make sure that 120 dedicated will reserved connection?
  
  Thank you.
  
  Published by: user12941628 on Sep 29, 2011 12:04
  
  Published by: user12941628 on Sep 29, 2011 22:49

  Hello

  I've done the configuration below.

  SQL > show the local setting

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  LOCAL_LISTENER string listener2

  Listener2 is my local representative.

  SQL > view disp setting

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  chain of dispatchers (PROTOCOL = tcp)(DISPATCHERS=5)
  MAX_DISPATCHERS integer 15

  shared_server_sessions whole 240
  SHARED_SERVERS integer 10

  max_shared_servers integer 40

  According to the Doc shared_server_sessions is "SHARED_SERVER_SESSIONS specifies the total number of shared server sessions to allow. This setting allows you to book sessions user for dedicated servers.

  So I put 240, I have 120 dedicated session.

  I also created

  prod_shared =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp (PORT = 1621))(HOST=mylinux.oracledb.com))
  (CONNECT_DATA =
  (Sid = PROD)
  (Server = Shared)))

  PROD =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp (PORT = 1621))(HOST=mylinux.oracledb.com))
  (CONNECT_DATA =
  (Sid = PROD)
  (Server = Dedicated)))

  can you please check is it OK?

  Thank you

• How can I get all research applications to open in a new tab and not the current window. I just downloaded the new FF8

  In my previous version of FF, whenever I did a search with any search results open in a new tab. Now with FF8, the results open up the active window that is really annoying. How can I get the search results to open in a new tab instead?
  I have Windows xp FF8

  You are welcome

  If you have changed the settings in the options to search for Google (http://www.google.com/preferences?hl=en) links should open in a new tab if you click on them. You can always Middle-click on a link to open the link in a new tab.

• The CSS transitions - how to ensure the image enlarges over images in other div tags. synchronization feature does not

  Hello ~

  Until very recently, CSS transitions has failed when you work with checkerboard at fluid (for CS6).

  That's right, Ratso jewelry | IMP. Gallery

  Hovering over the image, see that it:

  (1) growing but going below images in the following div; and

  (2) the transition seems to be set with a linear timing function when it is actually set to delay 1 s, mitigation of sync (which show live working screen in DW, but not online).

  I put my page by a code checker, there are a few errors which I am not familiar with fixing, where this is relevant.

  https://validator.w3.org/nu/?doc=http%3A%2f%2Fthatsrightratso.com.au%2Fimpgallery.html

  Are there solutions?

  Thank you very much

  As a test, rename the class in your main document read galleryimages-new as in

  

  
  
  

  This is so that we can apply different styles. You can revert to the original if you wish.

  Then add the following style rules of the document

  {.galleryimages-new

  Width: 100%;

  transition: 0.5 s facilitated;

  -webkit-transition: 0.5 s facilitated;

  -moz-transition: 0.5 s facilitated;

  }

  .galleryimages-new: hover {}

  -webkit-transform: scale (1.5,1.5);

  -moz - transform:scale (1.5,1.5);

  }

  See how you go.

• How to ensure the safety of base?

  My first form is about to enter into usage. I do not need or want to be able to change the design of the form somehow.

  Users will use Adobe Reader to fill in the fields of information forms and e-mail at the office.  I wish that they be able to save, send , and print the completed form. There will be a signature field, Im still trying to figure out.  With just the drive, I realize that simply fill out the form is what they can do.  I just want to ensure that no one can change the design itself.

  Thanks for any help.

  Set security to not allow changes. This is not a full proof, but is what offers Acrobat. If you did the form in the designer, then you may need to check there for security issues.

  Save the file with the player requires the activation of the right of the player, but it is limited to 500 uses of the form.

  Electronic submission is a potential problem, unless you are able to control the user environment. Electronic mail may not work correctly on all machines and is not a customer number, your of. That is why e-mail is a poor choice for general use. With respect to the presentation, why not just return the data? Data (FDF or XML) can simply be opened in the form and you have what would have been sent accordingly.

• How to check the application in different Simulator?

  Hi all

  I want to application.i a devevlop, it should work fine in all the bb devices.for what I do?

  Kind regards?

  You don't have to set anything in the classpath.

  If you use windows, just go to start-> programs-> research in motion-> are looking for the jde/Simulator that you would use

  If you just want to test your application on different OS, then download the different JDE:

  http://NA.BlackBerry.com/eng/developers/resources/simulators.jsp

  But if you want to test your application on different devices (to see how it would look on various displays), then download different smartphone simulators, always on the same site above. To load the app in the Simulator, open the smartphone Simulator-> click file-> java program load-> look for application .cod.

• Tecra A3X: How to run the recovery CD

  Hello

  Can someone please help? I want to do a full restore on my tecra A3x, but when I start and you press F12 as I am told in my book, nothing happens, how do I do a cover of product. I did everything the manual tells me to do, so not obvious answers please. Thank you

  Hello

  By pressing the F12 key immediately! After that laptop startup should allow a start menu.
  Then you should be able to choose between different devices like ODD, drive HARD, LAN, etc.

  Alternatively, you can try to press the C button allow booting from the CD/DVD drive.

  Last but not least, you can change the boot order in the BIOS.
  But don t forget to save the settings after changing in BIOS!

  PS: in all cases the CD must be interested before indicating the laptop

• Portege 3480: How to change the brightness of the display

  I recently acquired a portege 3480 with xp installed.
  I've searched high and low and cannot find a method
  to change the brightness of the display. Anyone anyone? Büeler?

  Hello

  already tried the fn key combination? I don't know how it is with your portege, but it should be like FN - F6 and FN + F7 to change the brightness of the display.
  Unfortunately, there are no XP drivers (or just the audio driver) for the machine to change it manually.
  You should try the FN key combination, there should be a sign that looks like a little 'Sun' with an arrow up/down in front.

  Welcome them

• How to test the application with the size of the diff display to ensure effective operation on all devices?

  Hello

  I work on one application and right now testing my application on BB Dev Alpha. As the resolution of the screen are different, I want to know how can I test the app on the screen size all supported?

  Take a look at this document:

  https://developer.BlackBerry.com/Cascades/documentation/UI/resolution/

  It should provide enough information about how to support the future 720 devices.

• How to invoke the basic application of e-mail that sending emails to multiple receivers?

  Hello world:

  I want to call the application of basic messaging to send email to multiple(>3) receptors, but how to write the uri?

  both receivers of document see the e-mail addresses:

  mailto:[email protected][email protected]
  

  It's ok, it can be analysed at '[email protected]' and '[email protected]', but how do you send email of 3 or 4 addresses?

  There is another question: how to write the json type in 'QVariantMap '?

  {
    "to" : ["[email protected]", "[email protected]"],
    "from" : 1234,
    "cc" : ["[email protected]", "[email protected]"],
    "bcc" : ["[email protected]", "[email protected]"],
    "subject" : "Some punctuation. Symbol in the $ubject!!",
    "body" : "HI! Here is some more stuff.\n\n14% of emails have #1 newline or
  stuff* @ home.\n",
    "attachment" : ["file:///path/to/my/item.txt"]
  }
  

  Thank you very much!

  Thanks much alopix!

  mailto:[email protected][email protected][email protected]
  

  It works very well.   Thank you once again!

  But for the QVariantMap, I try like this, it doesn't work yet! Help, please!

      bb::system::InvokeManager m_invokeManager;
      bb::system::InvokeRequest m_request;
  
      m_request.setTarget("sys.pim.uib.email.hybridcomposer");
  
      m_request.setAction("bb.action.COMPOSE");
  
      m_request.setMimeType("message/rfc822");
  
      //m_request.setUri("mailto:"+email);
  
      QVariantMap map;
      map.insert("to", QVariantList() << "[email protected]" << "[email protected]");    // required
  
      QByteArray requestData = PpsObject::encode(map, NULL);
  
      m_request.setData(requestData);
  
      const InvokeReply *reply = m_invokeManager.invoke(m_request);
      if (reply) {
          // Ensure that processInvokeReply() is called when the invocation has finished
          //QObject::connect(reply, SIGNAL(finished()), this, SLOT(processInvokeReply()));
      } else {
  //      QString m_errorMessage = tr("Invoke Failed! InvokeReply is empty.");
          //emit errorMessageChanged();
          return;
      }