How to export a command Via XML

Similar Questions

• How to export via the trigger star pxi to several dvices

  Hello

  I have huge problems to do this work and free time to try rarely. Joined my unfinished VI (SyncTrig - Test.vi) who needs to synchronize 9 x PXI-4472 & 1 x PXI-6713 on PXI-1006 chassis (made up of bus 3 x 6 slots). Master ST in the #2 Groove is DSA (PXI-4472), the rest 8 x DSA are inserted in slot #3-#10, and MIO (PXI-6713) is in slot #11. I need MIO to generate signals of x AO 2 (ao0:1 or ao6:7) of arbitrary length. DSAS acquire 72 x channels HAVE simultaneously until the last pair of samples AO is triggered (AO and I work at the same pace).

  I understand there are 2 ways to cynchronize a all these devices - to use reference clock 10 MHz from backplane, or Star trigger bus. Trigger the beginning of ST control is supposed to start all 10 devices. I couldn't do the 'references', examples and I managed to do the "StarTrigger" example works with 2 devices so I decided to stay with the latter. Of course, I hardly expect export usable for the PXI-6713 SampleClock and we hope to get help on this forum.

  Here are my 3 questions/dilemmas:

  1 grouping DSAS more in a single task & export clock via ST each

  I've separated the master of ST in the UpperTask export SampleClockTimebase via the bus ST and StartTrigger through the spine. The rest of the DSA are grouped in a single MiddleTask since NEITHER-DAQmx makes it easier for this type of devices PXI. In VI, UpperTask exports in a single PXI location.

  Is it possible to format the string to export the clock via ST to the multiple (all the) SHAS so they can all receive it grouped together in the unique MiddleTask? Or should I use a loop for export the time base clock 8 times and feed it 8 times for all slots #3-10?

  Please be specific.

  2 synchronization MIO with DSA master ST via bus from ST

  How can I use the TimingNode to implement SampleClockTimebase division, so that the PXI-6713 can use it in the #11 slot (LowerTask)? If this is not possible via the ST bus, can someone please show me what TimingNode (s) to use to export usable St master clock and get to MIO to synchronize the HAVE and AO closely?

  3 triggers of PXI chassis

  I left 2-7 as 'Dynamics' triggers to be available for NOR-DAQmx. Is it enough for the configuration shown above, from PXI devices occupy 2 of 3 independent buses in PXI-1006?

  BTW, I tried a different approach (SyncTrig - No. AO.vi), but the mistake of resting LowerTask just after his TimingNode power.

  Ladies and gentlemen, I hope power affirmative responses because the documentation is completely absent on synchronization PXI DAQmx and are completely dependent on WEB resources.

  Thank you in advance,

  
  

• How to export the Indesign to Format XML using JavaScript document

  Hi all...

  Can someone help me, how to export the indesign document to XML Format using JavaScript...

  Thanks in advance...

  doc.exportFile ( ExportFormat.XML, File(Folder.desktop+"/doc.xml" )
  

• How to export a png of different size while using the command exportToPNGSequence jsfl?

  How to export a png of different size while using the command exportToPNGSequence jsfl?

  Use the matrix parameter.

• How to export my orders to show the break down product prices, sales tax, shipping and discounts?

  I export my orders in a file .csv (via custom reports in Business Catalyst tool) and need to see separate columns/cells for prices, shipping and discount codes.  Currently, I can only understand how to export the price of the product (which includes the tax and does not say how much tax) as well as the order total.  It is of no use when I need to know what sales, delivery or discounts are applied in this order.  Is there a way to do this?  It seems to be a serious deficiency in the export of data from Business Catalyst, as any good bookkeeper should know gross vs income sales vs shipping rates as well as what to report to the tax due.  Thank you.

  Hi Katbat,

  I think I * almost * discovered how... Sign up for backups "BC". File synchronization with your dropbox. Open the backup file 'Commands', and it will show the columns below. Maybe you can cross compare it with the BC report to get your other columns?

  We use it to see discount codes / report on the value of invoices where the discount codes have been used. It is as a catalyst for the progress reports on steroids. Hope that helps

  ID

  Command ID

  Order name

  Workflow ID

  ID of Type status

  Order type

  The invoice number

  Date of invoice

  Assigned to user ID

  Shipping a

  Shipping tax rate

  Shipping attention

  Shipping instructions

  ID of the shipping Option

  Discount Id Code

  Discount rate

  Total amount of the order

  ID of Type of domiciliation

  Days of domiciliation

  Is to reproduce

  Next billing Date

  End return Date

  ID of Type of cycle

  Date of creation

  Date of last update

  Deleted

  Shipping Street

  Delivery Street.2

  Shipment of suburbs

  Delivery status

  Shipping postal code

  Shipping country

  Billing Street

  Billing Street.2

  Suburb of billing

  The billing status

  Billing postal code

  Billing country

  Street

  Street.2

  Suburban

  State

  Zip code

  Country

  ID of Type of payment method

  Description of payment

  Amount

  Payment status ID

  Transaction number

  Transaction Auth Code

  Date of payment

• Table of contents via XML import?

  I understood how to export the table of contents via XML.  The generated .xml contains fairly simple tags is easy to understand and would be simple to build in another tool.  There are XML import, but he seems to want to only import the XML file as content, and not as the table of contents.

  If I want to create this new table of contents in the format XML file using another tool and then import it into the RoboHelp project to replace the void that is, after I imported a bunch of WinHelp files, how can I do this?  I did a lot of research in the application, within the help, etc., online search and come up emptyhanded.

  Am I stuck at absolutely having to create and maintain the table of contents in RoboHelp?

  That's the one.

  See www.grainge.org for creating tips and RoboHelp

• How to export MusicXML... or Audio files as

  Hi all

  How to export MusicXML... or as Audio files. They are not gray. What should I do to make tham to be visible?

  Thank you!

  Master - Mac Mini 2.3 Ghz Intel Core i5, 8 GB, HD on Toshiba 500 GB, Mac OS X 10.10.5 system.

  Logic PRO X (10.2), RME FIREFACE UFX,.

  ———

  Slave - MacBook Pro 2.2 GHz Intel Core i7, 16 GB, Systen on Intel SSD 180 GB, Mac OS X 10.10.5.

  Sound library on 1 TB SSD, Pro 2, FIVE 5 Pro, VS, MIR PRO VI,

  For music XML - the partition must have the focus and be selected, then it is not gray.

  For others, the first word gives a clue (regions - you select the audio regions - you can select the audio tracks, etc...)

  

• How to export profiles Vista wireless so that they will work in Win 7

  I have Vista Home Premium on a Dell Inspiron 1720 and am about to do a new install of Win 7.

  Can someone tell me how to export profiles wireless Vista to format Win 7 will recognize and import.  I read a little about the command netsh in the cmd prompt, but see comments from users that it only works when you try to import into Vista and it does not work with Win 7.  The profiles were very easy to export under XP, so I don't know why I can't find an answer - and I have seen this question several times.
  Help, please! It's the last thing I have to do before you start the installation of Win 7.

  See this:

  http://www.nowiressecurity.com/articles/import_export_network_settings_windows.htm

• How to export directories TMS?

  Hi all

  TMS 14.3.2

  Another type of TMS database issue. If anyone knows how to export directories TMS in a text file?

  I'm after getting this information in another application, but not all systems we have are directly recorded in TMS. We have several sources of the telephone directory of VCS, which means, we are able to create lookup for system registered in the VCS but not necessarily managed in TMS.

  I could export the MSD systems with relevant data (for example, IP address, E.164 number, etc) to an Excel file, but that will not cover all the available system in the directories.

  See you soon,.

  Chris

  Thanks for the clarification, your original post I've read it was you were trying export data from the phone book of unmanaged by TMS systems that were on your VCS.

  Data export of VCS in an Excel via a phonebook Source file based on file would not work?  It would provide all the endpoint names and relevant link info if it is present as a H323/IP/SIP.  How to export directories in an Excel file located in the TMS administration Guide, page 204.

• How to connect with webdav repository XML DB - Oracle12c - Windows 7

  Hello

  I installed Oracle12c in Windows 7 (64-bit)
  How to access the XML DB repository with WebDAV protocol?
  What is the URL to use? That the user use?
  
  Try to use the user 'system' because I think there privileges because I create folders with PL / SQL (dbms_xdb.createfolder (' / public / NewFolder ');)
  
  In principle I try the web client W7: https://localhost:5500 because I see that the listener was listening to the HTTP protocol at the following address (TCPS); 3 times asking me the user name and password.
  , Error: the folder you entered does not appear to be valid. Please choose another

  
  I have check the HTTP DBMS_XDB port. GETHTTPPORT () and I get the result 0.
  Then Active: DBMS_XDB. SETHTTPPORT (8080) control, and tells me that I turn on port 8080.

  
  I try to connect via WebDAV: http://localhost: 8080 . 3 times asking me username and password
  , Error: the folder you entered does not appear to be valid. Please choose another
  
  I know that this error may be due to the web client Windows 7 and so I tried a web client like Cyberduck. In this case, I can't connect indicating to the user 'system' of authentication errors.
  

  
  

  And... I can connect without problems to XML DB Repository in Oracle 11 g 1 material and Oracle 11 g 2!

  
  Any idea?

  Hello

  After many hours, I found the cause and solution.

  The XDB in Oracle12c server with authentication "digest" rather "' basic in Oracle11g.

  This configuration is in the file "xdbconfig.xml" in the XML DB repository and the need to change it, but if you can not access through WebDAV... How to do? Then via PL / SQL:

  SET SERVEROUTPUT ON

  DECLARE

  in the XMLTYPE.

  BEGIN

  SELECT updateXML

  (DBMS_XDB.cfg_get)

  , ' / xdbconfig/sysconfig/protocolconfig/httpconfig/authentication/allow-mechanism / text () '

  , 'basic '.

  "' xmlns ="http://xmlns.oracle.com/xdb/xdbconfig.xsd"').

  To the

  DOUBLE;

  DBMS_XDB.cfg_update(àles);

  DBMS_XDB.cfg_refresh;

  end;

  /

  And that's all. I hope I can help those who encounter the same problem.

• Anyone know how to export a PDF from InDesign is "click to go to the next page" instead of "scroll to go to the next page?

  Anyone know how to export a PDF from InDesign is "click to go to the next page" instead of "scroll to go to the next page?

  I do not use the InDesign last, but in the past ID options for export to the format PDF did not define how a PDF should be considered once exported.  However, these settings can be adjusted in Acrobat via preferences: departure of layout and Zoom in the view of the Page.

  David

• How to export metadata Camera Raw?

  I can't understand how to export metadata to Camera Raw for the xmp files. I need to move my photos to another computer, but the files were modified with the metadata stored in the Camera Raw database.

  I run Photoshop CS6 with Camera Raw 8.6 in point 8.1 of Windows.

  Appreciate your help.

  explorer2014 wrote:

  I see no option to export data to XMP in the Edit preferences / Camera Raw in Bridge. I have Camera Raw 8.6.0.254.

  This is because the parameters of export to XMP command does not appear in Camera Raw preferences. Export of XMP settings is in Camera Raw in the menu without a title that the Adobe Help file called the "camera Raw settings menu. You can export the data for multiple images at the same time, if you select multiple images before the opening of Camera Raw, click the button select all in Camera Raw, and then choose export to XMP settings.

  

• How to export a form that has the Asian language in to CSV file? Currently the CSV file shows [...] for the characters of Asian languages

  How to export a form that has the Asian language in to CSV file? Currently the CSV file shows [...] for the characters of Asian languages

  If you export as XML instead, it should work because it uses UTF - 8.

• How to export all objects in ddl file.

  Hello
  
  How to export all objects in ddl file.

  Hello

  You can try this thing, but you need to do some R & D on your side as well.

  Reel under query on your hard drive.
  Run below command then you will get the instructions to get the ddl for the whole table.

  select 'select dbms_metadata.get_ddl(TABLE,'||tname||') FROM DUAL;' FROM TAB;
  

  It will show the result as for all tables...:

  select dbms_metadata.get_ddl(TABLE,NEW) FROM DUAL;
  

  Now you open the hold file in Notepad and make the above statement as:

  select dbms_metadata.get_ddl('TABLE','NEW') FROM DUAL;
  

  You can press on in Notepad ctrl and H to replace key and type in the first box of text TABLE and in the second "TABLE."
  Ditto for the name of the table.

  The slide in one by one by coil settting on so you will get each ddl statement in different files.

  I don't know if you are interested in R & D to yours and if you aren't then we forget.

• How to export PDFS using named preset PDF

  I got job pages PDF export (with kPDFExportCmdBoss), but I do not see how to export by using one of the named PDF presets (for example PDF / X - 1a: 2001).

  I want to be able to set up a custom named PDF export preset and then just export a PDF file using this preset, so that if the PDF output needs different settings at some point in the future, this can be done by simply changing the named preset.

  All the tips to find out if this is possible, and if so, how best to do so, will be much appreciated.

  An excerpt from my current code:

  get the export command
  InterfacePtr < ICommand > pdfExportCmd(CmdUtils::CreateCommand(kPDFExportCmdBoss));)

  get the interface of prefs for export
  IPDFExportPrefs InterfacePtr < IPDFExportPrefs > (pdfExportCmd, IID_IPDFEXPORTPREFS);

  Find the pages to export interface
  IOutputPages InterfacePtr < IOutputPages > (pdfExportCmd, IID_IOUTPUTPAGES);

  get the interface of output file
  IOutputFileData InterfacePtr < ISysFileData > (pdfExportCmd, IID_ISYSFILEDATA);

  get the UID page
  PageUID UID = iPageList-> GetNthPageUID(fromPage-1); zero for the first page

  set the outputfile
  iOutputFileData-> Set (pageFile);

  set the page
  iOutputPages-> AppendOutputPageUIDRef (UIDRef (db, pageUID));

  Set the preset in preferences
  / * This is the bit I don't see how * /.
  
  Run the command
  If (CmdUtils::ProcessCommand (pdfExportCmd)! = kSuccess) {}
  ASSERT_FAIL ("kPDFExportCmdBoss failed");
  break;
  }

  Hello

  Are you looking for IPDFExptStyleListMgr?
  Together, for example, that you can find in SnpExportBookAsPDF.

  Concerning

  Bartek