How to extend a region and the operation of insertion in it?

Similar Questions

• Satellite A300-1EI - how do extended warranty service and the uprising?

  Hello dear members,

  Recently I bought laptop Satellite A300-1EI of the Kingdom of Saudi Arabia. While I was on the http://eu.computers.toshiba-europe.com site for the check of the Standard warranty, I came across the information that I can point and uprising guarantee international service for my laptop up to four years.

  When I use the link available on the site, she is seeking for * agreement number *.

  But if I visit my guaranteed standard page, it is given to be n/a, which cannot be used here. Let me know the procedure involved in extenting and international warranty for my laptop to uplift service.

  Please give me advice so that I can make use of this option provided to fix my laptop.

  Hello

  You must first register your model of laptop on the Europe of Toshiba page.
  Here is the link:

  www.Toshiba-Europe.com/registration

  As far as I know, warranty contract number are in the box when you buy an extended warranty.
  This number is available only if you buy the extended warranty, it should be on the left, if you open the box of the guarantee.

• I tried to update the drivers that I used my motherboard Asus drive and some how it changes some firmware on the operating system

  OK, my problem is that I don't have a PC before generation. It is a custom build. A week ago while I was trying to update the drivers, I used my motherboard Asus drive and some how it changes some firmware on the operating system. now that is fixed. and now, just yesterday I downloaded the Windows Essentrils to win mail. This morning I woke up and started my PC and I get a red screen saying that some unauthorized to the firmware change has been done to solve this problem, I think I have to erase my hard drive and re to stall my win 7. and how do I do with the disc because it is a refurbished lic. Windows Essentials

  Yes

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• How to make a copy of all the software and the operating system that came stock with the laptop?

  I have a laptop that I have replaced the motherboard and now HD took a dump and should be replaced also. I need the software and the operating system disk, so I can restore the operating system to order.

  Please advise!

  This link will take you to a web document that explains how to order a recovery for the initially installed operating system disk.

  Here is the support for your laptop computer portal.

  Best regards

  ERICO

• How to extend an AM and what you will extend the AM

  Hi gurus of the OFA.
  
  Please explain how to extend an AM and what you will extend the AM.
  Thanks in advance
  
  --
  Kumar

  Hello

  Please go throughwith below link provied Anil...

  http://oracleanil.blogspot.com/2010/11/am-extension-in-OAF.html

  Regrads
  Meher Irk

• Smartphones blackBerry how to report a bug in the operating system or HW?

  Hi all

  I would like to know how to report a bug in the operating system or a bug of the HW? Post a message here looks like post it anywhere... If there is a serious bug in the operating system, how can I report on BOARD?

  Boris

  borisporosin wrote:

  I would like to know how to report a bug in the operating system or a bug of the HW?

  [email protected]

  borisporosin wrote:

  Post a message here looks like post it anywhere...

  Correct - this forum is a support system-based user community. ON-BOARD staff rarely participate and check no reports of bugs here.

• How to extend video back from the beginning

  My video editor tells me that I need to have 2 seconds early and end 2 seconds do not talk and repeat basically the first or the last displayed image.  I have currently only about 1/2 a second so I need extend backward and before 2 seconds.

  It seems that I can simply grasp the handle at the end of the video to extend forward, but I can't figure out how to extend it back from the beginning. When I take the handle, I can ' drag it to the left.

  In addition, my video is essentially a timeline I have razor cut into about 10 modules.  each module is marked with markers on the timeline.  What is the best way to add the padding forward and the end of each module?  I started lasooing and by dragging the last video, move the marker, then second lasso at the last, move, etc.  Is their an easier way to do this?

  Thank you

  I think the answer to your prayers is insert the Segment to hold image command. First assign a keyboard shortcut to the command. The extent of the workflow, I'm only being familiar with the feature, but I think it goes something like this.

  1. Open the sequence
  2. Move the playback cursor at the beginning
  3. Insert the wedge Segment of image
  4. Move the playhead to the end
  5. Insert the wedge Segment of image
  6. Close ff. A, open B next, repeat 2 to 6...

• How to create a region of the header programmatically?

  Hi all,
  can someone tell me how to create a region of the header programmatically (without using the Properties window).
  I used this code
  
  OAHeaderBean assocmpnybean = (OAHeaderBean) webBean.findChildRecursive ("NameHdrRN");
  
  After, I checked this object (assocmpnybean) it shows null...
  
  How to create a region of the header programmatically? Someone knows it please let me know... Its urgent...
  
  Thanks in advance
  
  Concerning
  Fabrice

  Hello

  Use this code...

  OAHeaderBean Bean = (OAHeaderBean) createWebBean (pageContext, HEADER_BEAN);
  Page OAPageLayoutBean = (OAPageLayoutBean) pageContext.getPageLayoutBean ();
  page.addIndexedChild (Bean);

  Thank you
  Gerard

• In Oracle Forms what is the difference between regions and the blocks?

  Hello
  In Oracle Forms what is the difference between regions and the blocks?
  Thank you
  Siva

  Hey Shiva
  in oracle forms block are entities that represent your data (table, views, etc.), you can say like EOs and your.
  Well, I don't know about the regions in forms.

• How can I switch to type Korean characters on my laptop keyboard? I tried to add 'Korean' in regions and the language, but not sure he did right b/c still do not work when I hit ALT + SHIFT

  I tried to add 'Korean' in the region and language-> keyboards and languages-> clicked on "change keyboard"-> "Général" tab - > added "Korean", but still do not work when I hit ALT + SHIFT.    what I'm doing wrong or what I need to download special software to enter Korean characters if necessary?

  Install windows updates.

  See also: http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/how-can-i-switch-to-typing-korean-characters-on-my/8aa8fe1c-e25a-e011-8dfc-68b599b31bf5

• How can I move my files and the operating system on a new hard disk on Inspiron 580 s.

  My hard drive failed Diagnostics recently and needs to be replaced.  I have since installed a new hard drive in Bay 2. I need to move everything from the old drive to the new drive and delete the old which is completed. So what is the best way to go about this?

  pjrl

  The simplest method, I prefer to install a replacement hard drive, is to clone the existing hard drive to the new, that will also transfer all applications and programs.

  You need an imaging utility, similar to True Image Home 2015.

  http://www.Acronis.com/homecomputing/products/TrueImage

  Acronis resize partitions transferred to match the size of the new hard drive.

  Hard drive manufacturers, also have their own free cloning software available, but it can be used only with their hard drives.

  First, install the new drive as the secondary and the image of the main hard drive in it.

  Immediately after the cloning, shut down the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

  Start the system with only the new hard drive connected.

  Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

  Before cloning a hard drive, make sure that the existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

  It will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

  Bev.

• AT300-101 - How to make a backup of the operating system?

  Hello

  I'm pulling out my hair! I send you my tablet from toshiba AT300-101 away tomorrow to have the battery changed but realized barely booking email repair said I need to make a backup of the operating system / replacement recovery media. After fishing trawl of the web, trying to figure out how do it, I'm still stuck. can someone help me with this please. It would be a great help.

  Thank you.
  Kate

  Hello

  There are different ways to save the date of the android device.
  You can use some 3rd party backup applications (check the Google game store for available applications), or you can use the internal Android option to save the data, application, Wifi passwords and other settings to google's servers.

  This option can be found in Apps App-> settings-> & backup restore

• How can I bypass password and the Welcome screen on windows 7?

  starting with W 7, I get an error of soul and user password. When I click ok I have 2 icons with a request of the users password. If I click ok it goes to the Welcome screen. How can I clean it and go directly to windows without password and home screen?

  There is no error message.  As long as you have two accounts with the listed names so there is no problem.

  - - - - - - - - - -

  If there is nothing wrong with the system, then you can go directly to any account chosen by:

  1 click on the Start button and in the search box, type netplwiz

  2 right-click on the shortcut resulting & select run as administrator.

  3 in netplwiz dialog box, check the option "users must enter a user name and password to use this computer". Select the user account Standard that you want to connect automatically by clicking on the account you want to highlight, and then click apply. Enter the password for this user account (when it exists) when you are prompted, or leave blank if there is no password.  Then, return to the dialog netplwiz new & still having that same account selected, uncheck "users must enter a user name and password to use this computer" then click OK.

  - - - - - - - -

  I do not pretend to create 2 accounts and more admin accounts that you use for day-to-day operations. It is a useful protection against the corruption of the user profiles.  No matter what profile can become corrupt and if that is the only admin account that you suddenly find you have serious problems. Operation with two spare admins [which serve just to allow tasks like facilities] protects these two accounts safe against the risk of corruption of the profile day and ensures that you will have access to the system if your normal accounts is screwed up.

• VMware - script the creation of the vm and the operating system installation process

  Hello.

  Trying to determine the exact steps to automate the entire process of creating a virtual machine, and install a linux OS (Rhel/Centos) in the virtual machine. I need to understand the steps to do it entirely from the CLI using scripts. I have seen a few sites that describe the basic process of creation of the VM, which appears to generate the vmdk file.

  I've seen nothing that shows what needs to happen to install the operating system in the virtual machine, in the CLI. This process should be auto/programming, so I can't use the GUI.

  I imagine that the whole process will have to call the process/kickstart file and start from that somehow, but I don't see how the elements fit. The goal is to then have a VM with the required OS/Apps that are then run / deployed by external users on their machines.

  If this process can work, then we can talk to a Council-expert/vmware on the next phase of the project.

  Answer that be detailing how to proceed, or point of item/sites on that would be great!

  Thank you

  I just tested on a Linux system and had to perform the installation of VMware VIX - 1.10.1 - 266898 two times.  It is not the first time without any message in the log file.

  After a successful installation, I ran a .vmx without first modifying the /usr/lib/vmware-vix/vixwrapper-config.txt file and received the error message waited on the specified version was not found and then after editing it, I was able to run the .vmx using vmrun nogui.

• SPRY Vertical menu bar and the Opera browser

  WARNING: This question contains elements of English grammar. Please read no further if you feel challenged by the English language.
  
  QUESTION: How one preventing a collection of submenus to detach their respective section and the window of the document to the drift?
  
  The TRIGGERING factor: this phenomenon occurs after clicked the menu item which contains the submenus and submenus are occurred.
  
  Background: I inserted a menu bar vertical SPRY as a SPRY accordion in a model Dreamweaver. The above problem occurs when I changed the default Panel of my accordion SPRY from zero to one non-negative integer other than zero. Like the SPRY, SPRY Accordion menus bar are two completely different objects, I'm baffled by this accident.
  
  USEFUL TIP: This phenomenon does not occur in (3.0.5) FF or Safari (3.2.1). I would like to say that it is only in the opera (9.63), but as a user of Leopard without Windows installed, I have no way to test it in IE. What is happening in other versions of these browsers, I don't know.

  SOLUTION: This is not an elegant solution, but the detachment and drift problems disappear when an empty paragraph tag is inserted between the main content div tag and the tag menu bar ul. Control of browser compatibility for FF, Opera and Safari translates into zero errors.

  It took a few tries, but my intuition on the physical proximity of the menu bar and SPRY accordion may have been right. In any case, it is this assumption that led to this solution.

  REQUEST: now that we have a viable solution, maybe someone with more knowledge can find an elegant formula.

  PREVIOUS CODE

  
  

  bla
  bla
  bla

  bla
  bla
  bla

  CODE FIX

  
  

  
  

  bla
  bla
  bla

  bla
  bla
  bla