How to fix 'error message' installation of windows services stops working during the installation!

Similar Questions

• How can pop-up "host process for windows services stopped working" I get rid from difficulty?

  do not know if I stop something or why it keeps comin upward, any suggestion would be great.

  Hello

  1. when exactly you receive this error message?

  2. have you made any changes to the computer?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start your computer in safe mode, I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  To set up the computer in a clean boot, follow the steps in the link: How to perform a clean boot

  http://support.Microsoft.com/kb/929135

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method 2:

  I suggest you to return the item and check.

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520

  Method 3:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Host process for Windows Services stopped working and was closed & Windows must now restart because the DCOM Server process Launcher service terminated unexpectely

  my computer keeps stopping and restarting itself. I get the same messages of 2 error: host process for Windows Services stopped working and was closed and; Windows must now restart because the DCOM Server process Launcher service terminated unexpectely. How can I fix? I used the norton support, run analyses of many, nothing has helped.

  None of the above works though... I didn't know by another forum to download Hitman 3.5 http://www.surfright.nl/en/downloads/home that he got rid of a virus that norton, Norton 360 and Malwarebytes antivirus support could not. I had no problem since :)

• My Acer Aspire One with Microsoft Office Windows 7 gives gives thefollowing error message "Microsoft Office Word has stopped working".

  My Acer Aspire One with Microsoft Office Windows 7 gimme gimme thefollowing error message "Microsoft Office Word has stopped working" is followed by "Windows is checking for a solution to the problem," then to "Windows try to recoverthe information" sometimes, he is able to recover and sometimes not. This can happen several times within 5-10 min.

  I'm almost illiterate with these things.

  Any help

  Thank you

  Original title: error message

  Go to programs-> Microsoft Office-> Office-> Office Diagnostics Tools.

  To test your installation

  You can also control panel-> programs and features. Select Microsoft Office in the list and select Edit in the upper part. The second Dialogue should offer the repair option.

• Error at startup of Vista: "host process for Windows services stopped working and was closed".

  Original title: problem with Vista

  There is this error message whenever he starts to the top and pop up at any time.

  "Host process for Windows services stopped working and was closed".

  "a problem caused the application to stop working correctly.

  How should I do? and my lower start bar turned white based

  Hello KenricLow,

  Try this to see if you can connect.
  Boot to safe mode.

  To access Safe Mode:
  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  (b) select an option when the Windows Advanced Options menu appears, and press ENTER.
  (c) when the boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then press ENTER.

  Of in safe mode, type msconfig in the start in the start menu search box and press return. Then on the Startup tab, uncheck the box any reference to the verisign/authentec software. Then, go to the services tab, sort the columns by manufacturer, then uncheck all references to Verisign. Then click ok and restart in normal mode.

  If please reply back and let us know if that helped to turn out to get rid of your error message.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "Audio Windows has stopped working" and "host process for windows services stopped working.

  Hello. I recently had to reinstall windows vista on my computer. Everything works well except that I continue to have problems with the audio. When I play youtube videos or to make Skype calls, that the sound disappears and I get the message "Windows Audio has stopped working" immediately followed by the message "host process for windows services stopped working." I remember having this problem in the past, every time that I had to restore the operating system, but I don't remember what I did to remedy. I went to the history of my problem and it's certainly a problem with Windows Audio. What can I do?

  Hello

  1. The problem only affects Skype and Youtube videos?
  2. The sound works fine on the computer in other circumstances?
  3. You reinstall the audio drivers after reinstalling Windows?

  Try the methods provided and see if it helps to solve the problem.

  Method 1:
  Check out the link and follow the steps.
  
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  Method 2:
  You can also visit this link and follow the steps in the article.
  
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Prosess host for Windows Services stopped working and was closed

  A problem with the application to stop functioning properly.

  Hello

  See the solution here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/host-process-for-Windows-services-stopped-working/365fc5fc-5edf-427d-a4d8-859b74b05b7c

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/host-process-for-Windows-services-stopped-working/a2b1b42b-9803-47fb-A120-15358aac5ee3

• Error: 0xc0000005, installer of Windows modules stopped working and the launch failed password

  Original title: Hello,.

  my Dell computer is running the following errors: 0xc0000005, modules Installer Windows stopped working and the Word failed to launch. I need help with this.  My system is Vista Home. Thank you.

  Hello Ewazn,

  ·         You get this error message only when you launch Microsoft Office applications or launch any application?

  You can view the article in the Microsoft Knowledge Base and check if it helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Please elaborate on the question so that we can help you in a better way.

• Windows Defender stop working after the malicious software removal tool

  I ran windows software and after this removal tool, my windows Defender stopped working says its turned off, but when I try to turn it on nothing happens

  This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

  You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running.

  If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

  Step 1: Check the Windows Defender service
  =================================
  1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. double-click on the service "Windows Defender".
  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Start" under "Status of Service" to start the service.

  If the problem is not resolved, please refer to step 2:

  Step 2: Save the associated DLL files
  ========================
  1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

  2. in the command prompt, type the following and press ENTER to each order:

  regsvr32 atl.dll

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 softpub.dll
  regsvr32 mssip32.dll

  3. close the command prompt, and then run Windows Defender.

  If the problem persists, please after return.

• How to fix error code: 0xC000021A in Windows 8?

  original title: How can I fix error 0c000021a in windows 8?

  Hello.

  I have in my device 0c000021a error, how can I solve this problem?

  Thank you.

  Hi, I found this refreshing the PC back to before the error started and disabling the antivirus, then do all the updates from there to restart the antivirus front. solved the problem for me.

  To ensure that this was sufficient, I did a new restore point after each successful update / installation and restart so that I could follow the error should he return. The error has since been absent from my machine.

  Also, don't let not your antivirus install new updates (for other software and hardware), updates are very well... If she informs you that there is an update (for example, adobe reader) go to the site where the update will be available. This will reduce any potential conflicts and therefore any chance of return error.

  It took 2 days to fix this, so I hope this helps you guys!

• How to fix error code 643 in windows vista

  How fix the error code 643 for windows vista when you try to install the updates.

  See if this sugesstion can help you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

• I just installed a game and I get an error message that says: he has stopped working, how to fix?

  The error message is Windows telling me it will find a solution and warn me, however, I do not get a message for me to rectify the problem.

  Hello

  1. were you able to play games sooner?
  2. don't you make changes before the show?

  3. What games you try to play?

  I suggest you try to start the game by placing the computer in a clean boot.

  Step 1:

  How to perform a clean boot

  http://support.Microsoft.com/kb/929135

  Note: Once the diagnosis is done, reset the computer to start as usual.

  Step 2:

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

  Step 3:

  See the event viewer for newspapers

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

• Director of Windows won't start; How to fix error: "component identity found in manifest does not match the identity of the requested component»

  Whenever I try to start Windows Movie Maker, I get the following error:

  "Sorry, cannot start Windows movie maker. Make sure your satisfied computer minimum system requirements before you try to start the Movie Maker and then try to update the driver for your video card if Movie Maker does not start".

  I know that my computer meets the minimum system requirements because it came with the whole package. I've also updated my video driver correctly several times. I even uninstalled Movie Maker, re-installed. Even uninstalled the complete set of Windows Live and re-installed, but it still does not work. After a lot of searching for answers, I found the event log in which this error:

  «Activation context generation failed for "C:\Program Files (x 86) \Windows Gallery\MovieMaker.Exe".» Manifest error or policy of the folder "C:\Program Files (x 86)" \Windows Live\Photo Gallery\WLMFDS. "." DLL"on line 8. Component identity found in manifest does not match the identity of the requested component. Reference is WLMFDS, processorArchitecture = "AMD64", type = "win32", version = "1.0.0.1". Definition is WLMFDS, processorArchitecture = "x 86", type = "win32", version = "1.0.0.1". Use sxstrace.exe for detailed diagnosis. »

  I don't know, but I think it's causing my movie maker does not start. I looked around even more of an answer to this question on how to resolve this error, and I couldn't find anything so far. Microsoft support said that I have nothing to do and it will solve automatically. Alas, I got this error whenever I tried to open Movie Maker (the time is equal to the time I tried to open it).

  What can I do to fix this?

  Thanks in advance.

  Hello JurrianH,

  You can go ahead and post in the forums alive in dealing with the problem with Live Movie Maker specifically. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• How to fix error message SOS does not not free if possible?

  correct the error message of sos for free if possible.   my email is * address email is removed from the privacy *

  Probably means that you have uninstalled some backup software, and it left a residue

• After restoring the system, I get the error message "Hasp SRM run-time environment (H0033)" during the installation of the software that I downloaded.

  Original title: software download

  I did a restore on my laptop and had to re - install software.   He downloaded without problem, but now it doesn't let me open - error message is 'Hasp SRM run-time environment (H0033) can anyone tell me what it is and how to fix it.   I already ran a "solution" to the problem and it did not help.   This software has no problems prior to the restoration.

  Hello

  This error occurs when the 'HASP License Manager"service no longer works correctly, stopped or not allowed in your environment. Before you continue with the troubleshooting steps, I would like to know some information about this problem.

  1. what security software is installed on your computer?

  2 What problem confined to a specific software or with any other software?

  3. are you referring to the resolution of problems by running to solve the problem?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Make sure that the HASP License Manager Service is started. Try the following steps to check whether the service is started or not.

  a. press Windows + R keys, type Services.msc and press enter.

  b. Locate the Hasp License Managerservice.

  c. double-click the 'Hasp License Manager' service and check if the Start button is grayed out or not.

  d. If the Start button is gray, then click the Start button to start the service.

  e. click on apply then Ok to save the changes.

  Method 2:

  If you use a security software and firewall on your computer, then try turning it off temporarily and check if the problem persists.

  Note: Antivirus/firewall software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus/firewall software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please reply with the status of the issue so that we can better help you.