How to fix sqlite3.dll erorr

Original title: How do I solve this problem? Windows xp sp3 32 bit OS showed sqlite3.dll erorr.

How to solve this problem? Windows xp SP3 32 bit OS showed erorr sqlite3.dll.

Hello

1. were there any changes (hardware or software) to the computer before the show?

2. When you receive this error message?

Follow the steps.

Method 1: You can perform a clean boot that allows to check if startup item or services to third-party application is causing a problem.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Please note: after troubleshooting, make sure you start the computer to a normal startup mode.

Method 2:
A few sqlite3.dll errors may be related to a virus or other infections of malware on the computer. You can run a Microsoft security scanner to make sure that the computer is free of infections:

Microsoft safety scanner

http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: Before you perform security analysis, make a backup of important data.

Tags: Windows

Similar Questions

  • How to fix Sqlite3.dll not found or missing errors?

    How to fix Sqlite3.dll not found or missing errors?

    Hello

    1. were there any changes (hardware or software) to the computer before the show?

    2. When you receive this error message?

    Follow the steps mentioned below and check if that helps.
    Method 1:
    You can perform a clean boot that allows to check if startup item or services to third-party application is causing a problem.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Please note: after troubleshooting, be sure to start your computer in normal mode.

    Method 2:
    A few sqlite3.dll errors may be related to a virus or other infections of malware on the computer that has damaged the DLL file. Alternatively, you can run a Microsoft security scanner to make sure that the computer is free of infection by the virus:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    Note:  Before you perform security analysis, make a backup of important data.

  • How to fix. DLL errors.

    I'm going to. Errors of DLL in my (Windows XP Pro SP3) Event Viewer log.  So, I'm looking to find out how the fixing of such. DLL HELL problems.  Is there a practical guide that could help me with this problem?  What about a program that would address these problems for a beginner?  I'd appreciate any help you send my way on this topic.

    Apparently, even the authority of certification 'Tech' failed to remove everything.

    I suppose that one or more of the following are missing:

    C:\Program Files
    C:\Program Files components \CA\Shared
    C:\Program Files\CA\Shared Components\TMEngine
    C:\Program Files\CA\Shared Components\TMEngine\UmxEngine.exe

    Because you want to get rid of Antivirus, I would delete C:\Program Files and all its files and subfolders.

    Now, to get rid of the reason for the event.

    First of all, go back to Services and write down the name of 'service' of the service that you have found.  This is not the same as the "friendly name" that appears in the list of services.  For example, if you scroll down to "Print spooler" and open its properties, you will find that "spooler" is the name of 'service' for this service.  Similarly, you will find "Automatic updates" in the list of services. his 'service' name is wuauserv.

    While you have the properties for this service engine TM open, click on the tab "Dependencies", wait a minute or two for the scanning system and then make sure that there is nothing in the box below: 'the following system components depend on this service' (if there are any dependent services listed, they are likely additional CA antivirus remains and must be eliminated as well).

    Open a command prompt window (start > run > cmd > OK)
    Type the following in the black command prompt window and press enter

    SC delete servicenameyoufound

    Another method is to download and install Autoruns.  Let the scan finish, and then click the Services tab.  Find the TM engine service, right-click and select Delete.

    If you use Autodelete, you should look at the Services tab (and probably also the logon tab) for all additional instances of "file not found."  If you find among them, at least clear the line (which prevents Windows to try to locate the file) or remove the entry.

    Finally, it is not quite clear to me that simply do not find a third party file DLL and allowing him to start a third-party service is sufficient to cause your system down.  Removing the service should eliminate Event 7000... but it remains to be seen if she will also stop accidents.

  • How to fix wsock32.dll when an ordinal is missing?

    My system Windows XP SP3 recently contracted one of these nasty pieces of malware that hijacks your entire pc... browsers etc and says you have to buy their software to remove the virus

    Luckly I got the two resident Spybot... and McAfee Endpoint Protection enabled... so it didn't go far...

    Unfortunately... seems not do some damage to my wsock32.dll... and here is where I am looking for help

    Now when I try to analyze a file... or the whole system of viruses, I get the following error:

    SCAN32. EXE - Ordinal not found... The 1112 ordinal not found in the library of dynamic links WSOCK32.dll

    I tried to fix this using several methods including uninstalling and reinstalling McAfee EPP

    Last attempt

    (1) delete all software McAfee via Add Remove Programs (over some internal stuff)

    2) tried to remove \Program Files\McAfee in explorer.exe

    Several files in this directory cannot be deleted because they were in use

    (3) booted safeboot with command prompt

    (4) installed a new wsock32.dll from a previous backup

    (5) delete all files under \Program Files\McAfee

    (6) restarted

    (7) reinstalled McAfee Endpoint 4.5.0.1852

    8) noted that the McAfee options for

    Computer for scanner
    Manage features
    Quick settings

    Missing

    (9) restarted

    (10) checked options... always missing

    (11) \Program Files\VirusScan Enterprise checked for the presence of scan32.exe... He was present

    (12) run \Program Files\VirusScan Enterprise\scan32.exe and received

    scan32.exe Ordinal not found

    The 1112 Ordinal not found in the library of dynamic links WSOCK32.dll

    (13) /scan sfc Ran now with my original CD of installation that is completed

    14) noted that options

    Computer for scanner
    Manage features
    Quick settings

    A returned... but hwn computer Scan to... is executed... received

    scan32.exe Ordinal not found

    The 1112 Ordinal not found in the library of dynamic links WSOCK32.dll

    Any suggestions?

    Hello

    Follow these methods and check if that helps:

    Method 1:

    I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Method 2:

    I suggest you install the latest anti-virus Microsoft Security essential on the computer program and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3:

    I suggest to run the check disk and then try to run SFC scan and check if it helps.

    Step 1:

    How to perform disk error checking in Windows XP

    http://support.Microsoft.com/kb/315265

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

    Step 2:

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

  • How to fix hpzjrd01.dll XP application downtime?

    want to fix the application to fail and fail. hpzjrd01.dll failure. any ideas?

    Hello

    1. Once you get this error message?
    2. did you of recent changes to the computer recently?

    This seems to be a H.P. file. I suggest you reinstall the software. Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    b. you need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    I hope this helps.

  • How to fix a DLL to run on the boot sequence

    I have a file of execution of dll missing on start up that is c:\users\barb\appdata\local\temp\sshna21.dll
    How can I solve this problem that I have to make an entry in the registry!
    I'm not sure what I do anyone could advice me please
    Thank you.

    Hello

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If the error persists after scanning use this program to out startup

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  • How to fix OLEACC.dll error

    Hi we recently moved house and have a new phone number, because we moved, I'm an OLEACC.dll is missing please re install this program. We havnt anything it is removed from the computer and I do not understand what has gone wrong. Could someone help with this problem please.

    Hi we recently moved house and have a new phone number, because we moved, I'm an OLEACC.dll is missing please re install this program. We havnt anything it is removed from the computer and I do not understand what has gone wrong. Could someone help with this problem please.

    Hi Francey1

    The oleacc.dll is a system file and is associated with the component of accessibility in the Panel.

    If this file has been corrupted, you should be able to fix with the help of built-in System File Checker (CPF). Perform the following steps.

    First of all, quit all running programs.

    Go to Start/all programs/Accessories.

    Click on the element of command line and select the run as administrator option.

    If you see a UAC prompt, click continue.

    In the command prompt window, type the following, exactly as shown.

    SFC/SCANNOW

    Press on key entry .

    This utility will analyze and repair the corrupted system files. It may take a while to complete, so be patient.

    Thank you for using Windows 7

    Ronnie Vernon MVP
  • How to fix STOP: C0000221 unknown error

    Hello

    I get the following error - STOP: C0000221 unknown error. The message appears for 3-4 seconds a blue screen then the screen goes black and I get the Windows Error Recovery screen. If I choose to start windows normally or in safe mode, I always get the blue screen with STOP: C0000221 message. Therefore, I am locked into this cycle of error messages and I can't really use all the fixes I found in the forums. What should I do?

    In early startup options (Safe Mode) have you tried other options like the "last known good configuration?

    If that wouldn't work, see this article if this can help:

    How to fix Ntdll.dll errors
    http://pcsupport.about.com/od/fixtheproblem/a/ntdlldll.htm

    Since you cannot start the computer, you can start your troubleshooting on number of article 8, which is "Test your memory of the damage." If you cannot perform the memory test, and you have 2 sticks of RAM, skip a turn in turn and check or you can use/borrow RAM from a known working computer.

  • Just installed windows 7, can not play some games, "missing msvcr71.dll" how to fix it? __

    Problem playing games missing dll's

    Try: http://i.justrealized.com/2009/05/16/how-to-fix-missing-msvcr71dll-problem-in-windows/

    Careful on the random dll download of well sites. You can expect another response before you try this, but it has worked for other people.

  • just reinstall my xp I had to jump the Msxml6.dll file and c:\windows\system32\mucltui.dll.MUI how to fix?

    original title: Please help

    just reinstall my xp I had to jump the Msxml6.dll file and c:\windows\system32\mucltui.dll.MUI how to fix?

    Hello

    1A Windows XP installed properly on your computer?

    2. If it is installed, you face any problem with Windows XP?

    I suggest you try the methods mentioned below and check if it helps:

     

    Method 1:

    Try to do a Scan SFC (System File Checker). The scan will look bad system files and will attempt to fix them, if possible.

    (a) click the Start button.
    (b) type: cmd.exe in the search results.
    (c) right click the cmd.exefile and select 'run as administrator '.
    (d) in the CMD window, type:sfc/scannowand press the Enter key.
    (e) restart and see if that solves the problem.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

    Hope this information is useful.

  • How do we install windows xp sqlite3.dll

    How to re - install sqlite3.dll I tried several times but has no I'm on windows xp

    George.

    Hello

    1. what program you install?

    2. What is the exact error message?

    3. when exactly you get this error message?

    4. you install a SQlite program?

    Answer for you help the better.

    SQLite3.dll means SQLite, a lightweight SQL database engine.

    SQLite is used by several popular software.

    You can also view the article mentioned below:

    Suggestions for a question on the help forums

    http://support.Microsoft.com/kb/555375

  • How to fix error hpzjrd01.dll?

    To START GET ONWINDOWS XP cannot FIND HPZJRD01.dll

    HOW TO FIX

    Reinstall your printer driver.

  • How can I fix System32 DLL

    When I start my computer, I get a message saying - this application or DLL c:\windows\ststem32\guard32.dll is not a windows image valid, how to fix this.

    Hello

    Method 1.
    This dll file is linked to Comodo Firewall. try to uninstall and reinstall the firewall and check.

    Method 2.
    Check to see if the problem exists in safe mode. Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    b. you need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    I hope this helps.

  • sfc/scannow command, found some corrupt dll files and can't find is not in the location of the store to fix, how to fix c:\windows\system32\opcservices.dll, TapiMigPlugin.dll, SxsMigplugin.dll, docagent.dll, tcpmon.ini files

    I checked the filesystem with the command sfc/scannow, it finds some dll files corrupted and it is also not instead of store, how to fix c:\windows\system32\opcservices.dll, TapiMigPlugin.dll, SxsMigplugin.dll, docagent.dll, tcpmon.ini corrupted files please help, I must pass several times to start my computer, it gives white screen after loading windows files. several times it gives Office to work. rest all the time balnk screen.

    Thanks for your response

    JKMV72

    When SFC cannot repair the files, it's time for a repair install from the dvd of the OS.  While you may fix one by one, you never know what else is wrong with the operating system.

  • error message "uninitialized msoc.dll" how to fix it?

    "msoc.dll not initialized" how to fix it?

    Hi jimTE,

    Do you check and clean boot if the problem persists?

    Method 1
    SFC scanner.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Method 2
    Perform the system restore to the date it was working fine.

    What is system restore?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

Maybe you are looking for

  • Universal Clipboard works only one way

    Hello I have a MacBook Pro running Mac OS Sierra and an iPhone 5 iOS running 10 of the retina Universal Clipboard does work for my Mac to my iPhone. When you try to copy stuff from my iPhone Mac does not seem to be able to paste them. I checked the t

  • LoadRunner: LoadRunner fails to start with the message "there are no valid license.

    Hi HP supports, Since last night, I have a problem with running HP LoadRunner version 12.50 product controller. During loading, LoadRunner opens a dialog box where the following message appears: "there is no valid license. Renewal of license, contact

  • BIOS updates

    I'm looking for a bios update for my two laptops Toshiba

  • 8 GB DDR3 PC3-10600 ECC UDIMM

    I see where the 8 GB PC3-10600 DDR3 ECC UDIMM modules are now available in the C20 series. What is the room and/or the FRU number please. Thank you.

  • I am not able to download and install Firefox.

    Once the file download is complete, I get an error message that Firefox has encountered a problem and needs to close.  It is also this same thing when I tried to update the adobe flash player and java runtime.