How to fix the speed slow donnload

Similar Questions

• How to fix the very slow closing of windows 7 2 1/2 minutes to close

  When I shut down my computer, it takes at least 2 to 3 minutes to close, how can I fix that, please help.

  Hi jyperras,

  Thanks for posting in Microsoft Communities.  The problem description, I understand that the computer takes a long time to stop.  Correct me I misunderstood the question.

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer before the show?

  Follow a few troubleshooting methods and check if that helps.

  Method 1: Disconnect non-essential external devices and then restart the computer. Check if the problem persists.

   

  Method 2: Open the troubleshooting of System Maintenance Utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter

  Method 3: Perform a clean boot to see if there is a conflict of third-party software like the clean boot helps eliminate software conflicts.
  HOW to solve a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  If the game works well by disabling services not Microsoft, then you can follow the audit to determine which program is causing this problem.
  Note: After a repair, be sure to place the computer in normal mode.

  Also check the event viewer for event logs.

  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  For reference:
  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• How to increase the speed of the PC without adding RAM

  PLEASE HOW CAN INCREASE THE SPEED TO RUN THE PC WITHOUT ADDING MORE RAM

  Some reasons for the slow pace of the computer:

  1. computer has not been maintained - http://www.elephantboycomputers.com/page2.html#Maintenance

  2. the computer is infected with the malware - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  3. the disk is too full. Remove useless stuff, uninstall unused programs. Do not forget to save!
  http://www.elephantboycomputers.com/page2.html#Backing_Up

  4. flaky third party software. Toolbars and modules are particularly guilty in this area. Uninstall toolbars (Google, Yahoo, ISP brand, etc) and look at what modules are in use in your browser (s).

  5. computer has too many unnecessary programs/processes running in the background. Manage your Startup:

  For XP - How to troubleshoot using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  For Vista/Windows7 - Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '. Autoruns is also very useful.

  6. the user runs an inflated/invasive such as Norton and McAfee antivirus program. Replace it with a better program. I recommend NOD32 (commercial) or Avast (free). Avira is also good, but the free version has an unpleasant reminder screen (Google for instructions on how to disable it). The user can also run several real-time antivirus/firewall/security programs.

  7. the user has installed new programs that are processor and/or memory-intensive (Photoshop, AutoCAD, Mathmatica or similar) and does not have the power of the equipment.

  8 drive fails and is in PIO Mode. It's very much slow (like being in 1985). See Hans-Georg Michna here information - http://winhlp.com/?q=node/10

  In addition to the above, see also http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html

  Note: If the computer has always been slow, in addition to the above user may have bought a machine with a less powerful processor and not enough RAM (memory). The normal use of the computer, 512 MB to 1 GB is sufficient for XP; Vista should have a minimum of 2 GB; Windows 7 is less demanding than Vista, but the minimum of 2 GB should also be used. MS - MVP - Elephant Boy computers - don't panic!

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• How to fix the main button to paste constantly

  How to fix the main button to paste constantly

  Short of getting a replacement from Apple or risk a repair third shop there is nothing you can do. How about a button on the home screen? Go to settings > general > accessibility > assistive touch > on.

• How to fix the bug of 1970 on iPad mini 2

  How to fix the bug of 1970 on iPad mini 2

  It is not a bug. It is the result of a deliberate action by the user. However, some reported that the DFU restore, if it does not, then you must make an appointment at the Genius Bar at the Apple Store closest to him have supported. Apple is working on an update that will prevent users from doing it again. If you changed the date to May 1970 or earlier and he can't restart your iPhone, iPad or iPod touch - Apple Support

• How to fix the microphone in Compaq Presario R3000

  Original thread title - how to fix the microphone in Compaq Presario R3000?

  Hello
  I have a laptop Compaq Presario R3000, and I tried to use Skype on it. Problem is that the other end can't hear me. I tried all the suggestions on the site of Skype to try and attach the microphone.  I tried the recorder (click programs, accessories, then entertainment to access), but when I record my voice, nothing, so I guess it has something to do with the microphone. Just to be sure - this model has an internal microphone? What I've read, it seems that it does. I downloaded the updated drivers, so I don't think that's the problem. Any suggestions? I'll try anything now, because I spent about 6 hours online trying to get the microphone to work and so far, nothing. Thank you! Patti

  Hello

  1. What problem is only on Skype?

  2. were you able to use this microphone earlier?

  3 have there been any changes made on the computer before the show?

  4. what operating system are you using on your computer?

  I suggest you to consult the steps mentioned below and check if it helps.

  Run the troubleshooter of sound recording
  Click on the link below and run the troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  See the following Help article.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  If the problem persists, then I suggest you to contact Skype to get help.

  https://support.Skype.com/

  It may be useful

• Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install?

  Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install? True, it is that it is already installed on your computer. If hide us, an another previous KB2570791 arises in our updates of Windows and asked to install anything, that it was installed... of the questions repeated and very annoying.  Help, please!

  (Microsoft Answers just sent us message have deleted our previous thread, ask for help!) We are simply not that these problems are problems with Windows XP updates related to DST or not?)

  Nadia. PA supporter said that your computer is hacked. He may be right. I can't weigh because I don't know what led him to this conclusion. If your computer is hijacked, then you should address that more that you need to fix this minor update. However, under the resolution of your problem to update, you can try this:

  Assume Windows XP

  Check the C:\Windows\System32\ directory for the presence of the file tzchange.exe

  If the file is not present or if the version of the file is not 5.1.2600.6171 or newer...

  Download the update appropriate 2633952 for your platform here:

  http://support.Microsoft.com/kb/2633952

  Run with - extract switch (e.g., Start > run > "[path to the downloaded file] \WindowsXP-KB2633952-x86-ENU.exe"-x)

  Of course, replace [path to the downloaded file] with the path to the downloaded file.

  Citations may or may not be required depending on the path. Place the x - out the citations if you use them.

  Choose a location for the extracted files (a new folder is recommended)

  Locate the extracted files. File tzchange.exe you want and copy it into C:\windows\System32

  That rerun Windows Update detection to see if the problem is resolved.

• How to fix the black screen of my hp pavilion g6

  How to fix the black screen of my hp pavilion g6

  Try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• G530 - how to fix the Novo key features?

  Hello guys!

  Some time ago I completely changed partitions configuration on my laptop, because I wanted to have two systems - Windows 7 (the default) and Ubuntu. Previously, I had an image of the LENOVO_PART (partition Lenovo recovery) by Paragon and burned on DVDs. Its contain images (a recovery key 7) OKR - mbr, boot partition and system (with default settings) file that contains information about the partition sizes and sectors. I deleted all the partitions and create new partitions.

  Now I want to restore the original scores, so I restored the partition recovery DVDs, and I put his ID 12 (PTEDIT32) and rebuilt the other partitions on the accuracy of a sector.

  Now, I have the following partitions: 1 - start (default is unnamed), 2 - system (default is unnamed), 3 - Lenovo, 4 - LENOVO_PART. Unfortunately the Lenovo System Restore does not start once I pressed the Novo key, so I put the active recovery partition and I can't restore the original mbr, boot, and system. Everything would be fine, but the Novo key doesn't work, then press start the normal system of Windows 7, not the recovery system.

  Could someone tell me how could fix the Novo key without the Lenovo service features?

  BTW, sorry for my bad English

  It should work properly. It seems that there is something wrong with the a key.

  at this point, I suggest you call lenovo support line and ship your laptop.

• How to fix the position of the cmd window?

  I would like to know how to fix the position of the cmd window on the upper right corner instead of middle of anywhere in the window.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  Hello!

  Open "Command Prompt", right-click the title bar and choose "Properties".

  Go to the Layout tab.

  In terms of the "Position of the window", uncheck "Let system position window.

  Change the Left and Top values to your preference - on my system (left = 290, Top = 0) are ok.

  On the same tab, look at the picture under "Overview of the window" to try different values - the window position changes after entering a value in the left text box and pressing the tab key.

  I hope that helps!

• How to fix the rotation in application as apply just open land scrap only mode in Html5

  Dear team,

  I develop application using HTML5 for Z10.

  How to fix the rotation in application as apply just open land scrap only mode in Html5

  Please help me and give me a link to the documentation for this.

  Kind regards

  HP

  Hello

  You can set the following in your config.xml file

  There is more information available on our developer site -https://developer.blackberry.com/html5/documentation/code_sample_creating_a_bb_widget_config_documen...

• How to fix the below errors event-7001

  How to fix the below errors event-7001. Because my PC Win7 OS frozen when start as msg 'Welcome '.
  The computer browser service depends on the Server service which failed to start because of the following error:
  The dependency service or group was able to start. Event ID is 7001.

  Hello

  Try to fix this problem by doing this

  1. Open the Device Manager.
  2. On the view menu, click to select the check box Show hidden devices .
  3. Double-click drivers Non Plug-and-Play.
  4. Double-click NetBIOS over TCP/IP.
  5. In the use of the device box, click use this device (enabled).

  Hope this helps

  James

• fonts of PDF in Acrobat Reader MS are coarse, while the same document loaded into Acrobat Pro on the same computer has smooth fonts. How to fix the appearance of fonts in MS Reader? Running Windows 7.

  fonts of PDF in Acrobat Reader MS are coarse, while the same document loaded into Acrobat Pro on the same computer has smooth fonts. How to fix the appearance of fonts to Rader DC? Running Windows 7.

  Hi sidneys22641895,

  Please try to check the rendering under Edit menu options > Preferences > Page Display.

  Check if in smooth text field "for computer/laptop LCD screens" is selected.

  Let us know if that helps.

  Kind regards

  Meenakshi

• How to decrease the speed "duplicate"?

  How to decrease the speed "duplicate"? I use this script, but my eth0 show me 100 MB/s: run {allocate channel ch1 device type disk rate 10 m;}   allocate channel rates auxiliary ach1 devices type disc 10 m;   target database duplicate to dbtest02 of the active database. } What I did wrong?

  A transfer on the network will use all of the bandwidth is available. If you want to limit the consumption of bandwidth, check with the network team, if they can implement all controls using intermediate switches between the two servers.

  Hemant K Collette