How to fix? Windows 7 64 bit my cursor is not an arrow, he comes to change to a vertical line?

It just happened. no abuse to my pc. How to fix my cursor. A vertical line is not an arrow?

This could be a problem with the mouse drivers after installing Windows 7. You can try to update the drivers for the mouse in Device Manager and check.

· Are you using a desktop or laptop computer?

1. click on start.

2. type of Device Manager to launch the search.

3. expand mice and other pointing in the Device Manager window devices.

4 right properties.

5. click on the driver tab.

6. click on update drivers.

7. click on OK.

Check if the exclamation points are displayed with the device. The exclamation point indicates a problem with the installed driver.

See the link for update drivers: update a hardware driver that is not working properly:http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work-good

or

go to control panel-> hardware-> mouse-> pointer options and set the paths of pointer to yes.

Tags: Windows

Similar Questions

  • How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

    How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

    Hi João,.

    To help solve the problem, remove the PC from the domain and then connect the computer to the domain.

    Click the Microsoft KB Article below for troubleshooting steps.

    The trust relationship between this workstation and the primary domain failed

    Let us know how it goes.

    Thank you

  • How to fix Windows 7 64 bit freezes on the sleep/hibernate?

    My computer freezes constantly just before the sleep/hibernate or just after waking you. I had this experience with SP1 and without. Before you remove SP1, the HD will start to charge about 17 minutes to leave inactive. Almost exact to the minute, it will crash after 25 minutes to leave inactive.

    After removing the SP1, the system will NOT crash before going to sleep. However, it will crash as soon as you wake up. Below is summary dumps of two representative falls.

    032011-28688 - 01.dmp 20/03/2011 16:45:38 (after SP1 has been deleted)
    PAGE_FAULT_IN_NONPAGED_AREA 0 X 00000050
    fffff981'0 c 002690
    00000000 00000000'
    fffff880'0143f4e0
    00000000'00000005
    NTFS.sys Ntfs.sys + c9836

    26317 031911 - 01.dmp 19/03/2011-21:20:34 (before SP1 was removed)
    PAGE_FAULT_IN_NONPAGED_AREA 0 X 00000050
    fffff981'13 has 02690
    00000000 00000000'
    fffff880'01239460
    00000000'00000005
    NTFS.sys Ntfs.sys + c47b6

    As a backdrop, the system:
    HP Pavilion Elite m9400t
    Intel Core 2 Quad Q6700 @2.66 Ghz
    6 GB DDR2 2400 (Micron Tech and Hynix Semiconductors)
    ATI Radeon HD 3650
    750 GB HD Samsung HD753LJ
    OEM: Vista Ultimate x 64
    Current (academic): Win7 Professional 64-bit
    H/w bought November 2008
    Operating system: any new installation

    Programs:
    In addition to Windows, I just installed Office, Chrome, Firefox. I have installed but removed ScanSnap of UBWALL scanning software, Windows Live, Windows Security Essentials

    Devices:
    No devices are attached

    Tests already performed:
    Memory tests (memtest86, memtest86 +, WIndows)-no error
    Chkdsk/f/r (twice) - no error

    I'd appreciate any help. Thank you.

    Updated - I deleted Windows 7 Pro and re-installed Vista Ultimate OEM. It works perfectly. This excludes any possibility of h/w issue.

    I think to re - install Win 7 Pro and see if the error. Any ideas/suggestions?

  • How to fix windows 7 64 bit system Blue Screen occurs repeatedly

    Have Acer running WIn 7 64 bit. Periodically, the computer gives BSOD usually idle during. possible start-up Hibernate.

    Error is IRQL_NOT_LESS_OR_EQUAL

    STOP 0X00000000A

    More recently, failures occurred the 29/6, 7/10, 7/23 and 8/1. At ran andmemory check disk with no problems found. Video driver updated and verified external drivers up to date.

    All updates have been installed.

    System is used mainly for Office 2010 and Outlook.

    Found reports of similar problems KB979444, 979903, 976746, 978571 and?. Don't know which apply.

    Copies of files if necessary dmp.

    This is caused by something, try to store something in a place to which he has no access.  The most common reason is a device driver or a hardware conflict.  If you have recently replaced all the drivers, which may well be the cause.

    If this is not the problem you can always check the cryptic system log.    To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
    `
    When you get your system in good working condition, I invite you to back up your system up to an external hard drive and it puts regular periodic updates.
    -
    I hope this helps.  Good luck.

  • HOW TO FIX: "windows Explorer has stopped working" / "windows restarts.

    HOW TO FIX: "windows Explorer has stopped working" / "windows restarts.

    Hello

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • How to fix windows photo viewer showing the class not regitered error in the local system.

    Dear all,

    Please provide me the solution.

    How to fix windows photo viewer showing the class not regitered error in the local system.

    Thank you best regards &,.

    Amol.

    Hello Amol,

    Were there any changes made on the computer before the show?

    The problem may occur if there is a problem with Java on the computer. I suggest you to check the link and try to update Java:

    http://www.Java.com/en/download/help/download_options.XML

    http://www.Java.com/en/download/index.jsp

    Let us know the results.

  • How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

    How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

    Go to the Toshiba support site and search page of your PC/computer laptop.

    Download and then install the last set of specific drivers for W7.

    See you soon,.
    Jerry

  • How to download windows 8 64-bit unique language. ISO file.

    How to download windows 8 64-bit unique language. ISO file for re in 2000 installation for HP laptop.

    How to download windows 8 64-bit unique language. ISO file for re in 2000 installation for HP laptop.

    Hello

    The only language of Windows 8 is available only pre-installed on a computer, it can not be downloaded.

    You must contact the HP Support to know what recovery options you have.

    Concerning

  • How to install windows xp 32 bit on hp dv6-6117tx lodge and application download driver on windows xp

    How to install windows xp 32 bit on hp dv6-6117tx lodge and application download driver on windows xp

    Hello

    Please read the XP downgrade useful guide at the link below

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

    The guide details for your series model are in the section called 3. Dwas Modelisation

    Paul

  • When you try to install call of duty 2 on windows 7 64 bit, I received "library not registered".

    original title: library not registered

    When you try to install call of duty 2 on windows 7 64 bit, I received "library not registered".

    ------

  • Satellite P300 - how to install Windows 7 64 bit?

    Hello

    I had a Toshiba Windows 7 upgrade for my P300 which was under Vista 32 bit. During installation, asked me if I wanted to install 32-bit or 64-bit Windows 7 and I chose 32-bit. Installation worked fine.

    Now (moths later) I decided that I would like to install the 64-bit version instead. I have an own (custom) settled by booting from the DVD, but it don't did me not option for the moment and all re-installed Windows 7 32 bit. I know that the 64-bit version is on the DVD (there is a folder for it) - how to start from the DVD and have it install the 64 bit version?
    I didn't format the drive when you perform the clean installation - if I do that it will give me the option?

    Thank you
    Ben.

    Great news, mate! :)

    Thank you for this feedback. I'll test it on my Satellite P300 I want to upgrade to Windows 7 too.

    In addition, an upgrade is possible to the same version: This means that Vista 32 bit can only be upgraded to 32-bit Windows 7. On 64 bit it s the same ;)

  • How to get windows Vista 64-bit when I have 32-bit? ___

    I have a processor 64-bit capable and am running Windows Vista Home Premium (32 bit). I created a backup to move to 64-bit Windows Vista, but I cannot figure out how to download the 64-bit version. I have not bought or something else that I should not be able to download the upgrade or what? How can I do this? I need to run a Christmas present game. Thank you

    Upgrading to Vista 64-bit has nothing to do with Windows Update. Please post here instead: http://social.answers.microsoft.com/Forums/en-US/vistainstall/threads

    Upgrade to another edition of Windows Vista:
    http://Windows.Microsoft.com/en-us/Windows-Vista/upgrade-to-another-edition-of-Windows-Vista

    Windows Anytime Upgrade: Frequently asked questions:
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Anytime-Upgrade-frequently-asked-questions
    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • How to fix windows script error c:\program files\safeboot\AutoDomain.vbs

    Whenever I start my laptop, this error appears twice. I have to click OK twice before starting Windows. What caused this and how would approach I solve this?

    This error appears twice when starting my laptop. What causes this and how to fix it?

    Thank you in advance!

    Sharon

    Hello Sharon,

    1. have you done any hardware changes or software on your computer before this problem?

    2. your computer with any domain or server is?

    If you have McAfee installed, you can uninstall McAfee. If the problem persists, reinstall then it & check:

    How do to uninstall or reinstall taken supported McAfee products using the McAfee Consumer Products Removal (MCPR.exe) tool?

    Hope the helps of information.

  • How to upgrade windows 7 32-bit to 64-bit?

    Hello.. im running windows 7 32-bit untimate, I want to upgrade to 64-bit.

    How I can do this, please help me...

    Processor: AMD A4 4000 APU with graphics Radeon (TM) hd

    RAM: 4.00 GB

    Graphics card: AMB Radeon HD 7480D

    Visit these link click here

  • How to install Windows 7 32 bit, updated to 64-bit

    Hi, using windows 7 32-bit for a year, but I like to upgrade to the 64 bit version, my info is required system. {processor intel dual core 3.00 ghz, 8 GB ram, 2 GB NVIDIA graphics card,} so for all these requirements may be able to install the 64-bit, although I tried once to install but it says I can not confrtable in this version.so what can I do, please help me on this problem

    You need to boot from the disc, by setting your BIOS to do. I have provided these instructions in my previous answer. Remember, there is no way to upgrade from 32 to 64-bit, it's pure install only.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

    How to load BIOS and change Boot Configuration

Maybe you are looking for