How to fix wireless adapter disabled automatically

My childcare adapter WiFi automatically disabled in the Device Manager is there a way to solve this problem without re-installing/updating?

sometimes gets Ethernet disabled 2
I hope that this is not a virus, because one was found just before what is going on has begun, but it has been deleted
Specifications of the PC:
model: acer aspire 5720z
OS: windows 8 (x 64)
CPU: Intel Pentium Dual T2330 @ 1.60 1.60
RAM: 2 GB
WiFi adapter: Qualcomm Atheros AR5007EG

Hi Justin,

Thanks for posting your query in the Microsoft Community Forums.

1. what error message you get in Device Manager?

2 have you made changes on the computer before this problem?

I recommend you check out the links below and check if it helps

http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

http://Windows.Microsoft.com/en-us/Windows-8/how-find-remove-virus

Important: Antivirus software can help protect your computer against viruses and other security threats.

In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

Hope this information helps you.

For any other Windows related question, answer us and we will be happy to help you.

Tags: Windows

Similar Questions

  • How to fix stuck battery and automatic when restart updated ios 9.3.3

    How to fix stuck battery and automatic when restart updated ios 9.3.3

    Lambung writes:

    How to fix stuck battery and automatic when restart updated ios 9.3.3

    What do you mean battery stuck?

    the basic troubleshooting steps are: reboot, reset, restore from a backup or restore as a new.

  • wireless adapter gets automatically disabled.

    Whenever I restart the system, I lost the wireless network card. So I need to go to Device Manager to uninstall and reinstall the network card. After he reinstall works fine until I have to reboot the system. Suddenly the system startup has also slowed to a lot takes about 5 minutes to start after the Welcome screen. I deleted the temp... just almost done but unable to find a solution for this.

    Hi Rajiv,

    Thanks for posting your query in the Microsoft Community. According to the wireless adapter problem is automatically disabled. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    I suggest you follow the steps in the article.

    Network adapter problems

    Windows wireless and wired network connection problems

    You can read this article for more information:

    How to reset the Protocol Internet (TCP/IP)

    I hope this helps. Let us know if you need more assistance.

    Thank you.

  • How to fix my error of automatic page numbering

    Hi all:

    I'm working on a book with many chapters and some even, I put every single chapter as an .indd file. Now, I need auto page all indd files and found that I made a mistake on my template file: I checked the start page, numbering at 1. When I add my files indd in a book file, cannot have continue a separate paging.

    I reset each document individual indd to automatic page numbering, but did not work.

    Appreciate if someone can help me to fix this, to avoid to set page numbers by hand for all indd documents.

    YEST, the numbering in each chapter files options is everything that is wrong.

  • How to fix his jerky in PA3455U Toshiba bluetooth wireless adapter?

    I have Toshiba bluetooth wireless adapter PA3455U with Toshiba bluetooth stack v 8.0.0.12Tsoftware on Windows 7. When I use it in the A2DP profile I get his jerky.
    Tell me please how to fix this?

    Have you checked specification for this old piece of hardware, including system requirements?

  • Time is presented an hour too late on my MAcBook Pro since I installed El Capitan. Even when I fix by hand, it changes automatically, weather, I disable tim Auto adjust. How to fix this bug?

    Time is presented an hour too late on my Mac Book Pro. Even when I correct, it changes back 1 hour too late, wether I have disable automatic time adjustment. For example in France is actually 19 h 11 bu is present on the top of my screen that 20 h 11.

    How to fix this bug?

    Arie

    System Preferences > Date & time > time zone...

    Make sure that your time zone is set correctly.

    If, after the back... There is one wackiest thing that can cause this.

  • How to activate windows Filter Manager norton (error message3039 65553) how to fix the driver to switch the wireless adapter

    Error message from Norton 3039 65553 filter manager not lit

    Disconnected Error Message wireless adapter

    IMO, this kind of response is yet another reason to remove all Symantec software 'security' of your computer.

    As far as I know, Microsoft Windows Filter Manager is software that is designed to be used by third-party developers (it is in this case Symantec) for simply integrating their software in Windows.  It is not controlled by the user.

    That said, it is possible (no guarantee) If you provide information in Event Viewer that relates to the crib of filter, someone here may be able to help.

    • Open the event viewer (start > run > eventvwr > OK)
    • Look in the Application logs and system warnings and errors
    • Double-click a warning or an error of knowledge (properties)
    • If the Filter Manager produces an error, it will probably be in the system log
    • When (if) you find an entry that relates to the Manager of Windows filters, click on the "copy" icon in the properties of the page (just below the up/down arrows) and paste the information into your answer here "

    But you should consider seriously really get Norton Removal Tool and Norton replacement with something else.

    Microsoft Security Essentials is a good free antivirus solution and eSet NOD32 Antivirus is a good business idea.

  • [Wireless-Vista] Disable the automatic access point.

    Right then, I had this problem when you play any kind of online game, what microsoft calls a 'feature', when I play a game online, I get a 5seconds or until disconnecting lag spikes every 1-5 minutes, making it impossible to play counter-strike, Call of Duty Modern Warfare 2, Battlefield 2 and all these sorts of FPS games. I read on this vista of "paintings" Wi - Fi point automatic scan has, so I tried with impatience to deactivate, without success, I even once turned off automatic TCP/IP that crashed my computer, so now I'm wondering, how in the world am I supposed to play a game with spikes of major shift due to a malfunction of the so-called?
    If there is a way to turn it off, remove, or simply work around, tell me. I don't care if it is not allowed, because I got it with feautures of microsoft...

    sckizman,
    Have you ever been able to play games online with this computer?
    What version of Vista and what service pack you have?
    You are able to surf on the net normally or you we lag with almost anything on the internet?
    If you have not yet done so, perform a clean boot , and then test your access.  Also make sure that your system BIOS and chipset drivers are up to date.

    Here are instructions on disabling automatic switching between wireless access points:

    Prevent your computer from switching between wireless access points

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • -SOLVED! -PCI or USB wireless adapter is disabled and will not activate on Windows 7

    The solution: uninstall ZoneAlarm!

    I spent 3 days and 3 different cards, trying to solve this problem. First of all, I bought a Netgear PCI wireless adapter. Installed according to the instructions. Device Manager showed the adapter works properly but turned off and nothing I tried would enable the adapter.

    NETGEAR has taken over to the store and buy a Linksys PCI wireless adapter. Exactly the same problem. Device Manager, said the adapter worked correctly, but turned off and would not turn on.

    So I called Linksys support and paid them only for the remote service and they couldn't get it to work either (of course to return money). They suggest is to contact Microsoft technical support or buy the USB version.

    I went and picked up the USB (WUSB600-N v.2) version today and guess what? Exactly the same problem. Device Manager showed the device works correctly, but turned off and would not turn on. After talking to a few other technicians in addition to myself, we agreed that the only other option was to reinstall windows. But just before I decided to do, I checked one last time to Google and came across a post in the forums of Vista by someone who had the same exact problem, uninstalled ZoneAlarm and then worked their wireless adapter.

    Well, I decided to try that before reinstalling windows. As soon as I uninstalled ZoneAlarm and the computer restarts, the adapter has been activated and automatically found my network! This means that ZoneAlarm control network on the computer and for some reason cards some not allowing a wireless adapter is enabled.

    Then I tried to re-setup of ZoneAlarm. After that I have re-installed, my wireless adapter became instantly disabled and would not turn on again. So I uninstalled ZoneAlarm at all times. My router has SPI and NAT firewall on top of the Windows Firewall, so I need anyway ZA.

    If you have ZoneAlarm, get rid of it. If you still experience the problem of your card activating Wireless does not and have ZoneAlarm, try to uninstall any firewall software 3rd - party that you have already installed (not the Windows Firewall).

    I was really frustrated after spending 3 days with 3 different adapters and many trips to stores using the adapters and buy different cards. I'm glad I found this post on the forums of Vista, so the credit goes to the one who made this post.

    On a side note, after I installed the drivers from the CD and Linksys site, Windows update has shown there is an updated driver on the site of Ralink which I installed it and so far no problem. My WUSB600-N automatically connected to the strip of the 5 GHz on my router dual band and speeds are ultra fast and signal is strong in a completely different room.

    Hope this information helps others finally solve this problem.

    See you soon,.

    Matt

    64-bit, but it should work on either. ZoneAlarm includes network connections and was not what allows the adapter to be activated. Even close ZoneAlarm does not work either. ZoneAlarm must be uninstalled from the card must be activated.

    Vista drivers work fine with this adapter. Then a Windows Update is the updated drivers for Ralink which also work very well.

    If you have properly installed the drivers and display device manager the device works correctly, but disabled, and then uninstall any firewall/antivirus 3 rd-party should do the trick.

    I am a tech, more I consulted other technicians as well as paid for technical support of Linksys and nobody could understand this problem and it's no wonder. Who would have thought that ZoneAlarm or any 3rd part antivirus/firewall software would take complete control over network connections and not to allow a new network adapters must be installed correctly.

    If anyone needs any help other than that, feel free to ask.

  • I have windows 7 and how to remedy a wireless connectivity problem when it; s a problem when it has detected the wireless adapter or access point

    I have windows 7 How to deal with a problem of wireless connectivity. The problem according to the diagnosis of computer's wireless adapter or access which was detected point

    You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

    See the communication from this "criticism" - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

    I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  • Wireless adapter suddenly lost, disappeared from the Device Manager. How to prevent this?

    Hey :)

    Ive looked all over the internet, but still nothing quite similar to this...
    -Asus PC V551LB-CJ093H
    -Windows 8
    -Wireless network adapter: Intel Dual Band Wireless-N 7260
    The problem is: laptop suddenly loses wireless wireless adapter because suddenly friggin disappears from the Device Manager, as did not exist. Only the wired network adapter still works and all things Bluetooth. The only way to resurrect from the dead is to restart my laptop. But I don't like this solution X_x. How can I stop my laptop disconnect my wireless connection?
    What I've tried:
    Auto-updated the driver from Device Manager
    -' Find the hardware changes' on Device Manager
    -Disable "allow the computer to turn off this device to save power" the power of the device management
    The only thing that has worked now:
    -Restart the laptop.
    Thank you very much for your help :D

    Thanks a lot :) I've manually updated the drivers from the manufacturer's website (intel), and the problem ceased to occur. I will you update if anything... Thanks again.

  • How to disable automatic updates of ios connected via wifi

    How to disable automatic updates of ios connected via wifi

    1. Open the settings app.
    2. Push App and iTunes Store.
    3. In the automatic downloads section, you will see an element called updates.
    4. Press the switch to turn it off
  • Pictures of Apple: How disable automatic download to "My photo stream" Album?

    Hi all

    I mean I too spend opening Photos. I'm not happy at all pictures, but is not today's topic.

    I have a huge library converted to opening in Photos. The process was very long, but everything seems fine now.

    My library is 90% of the pictures I take with my DSLR in Raw format.

    I started to get mad when I found the photos strove to upload photo I added locally in my library to my photo stream (all in RAW and big, very big JPEG).

    At the opening, I had an option to disable automatic downloading in the flow of the photo:

    This option is essential to avoid the stream function photo to kill your connection, fill all of your iPad, iphone with pictures that you don't want to share with other devices.

    I've looked everywhere in pictures an impossible to find where this setting is hidden:

    I'm still very very interested get all the pictures that I shot with my iPhone and iPad synced with my Mac, but whenever I have activate 'My Photo Streal' it starts to download all in the flow...

    I can't believe they killed opening so that they also in fact almost unusable Photos for customers migrating from Aperture despite.

    Is there a hidden feature or the definition of magic to turn off automatic download?

    Kind regards

    O.P.

    No, sorry.

    If you use my photos in Photos to Mac workflow, you will automatically download all the new photos in your library for my photo stream as well.

    However, you could work with two libraries of Photos - a library that you use iCloud wist and where you download your iPhone and iPad photos and a second, where you keep your RAW files.  Only, you will need to transfer the photos from your library of photo stream for your main library manually.

    https://help.Apple.com/photos/Mac/1.0/?lang=en#/pht6d60b524TThismage help explains how to use more than one library.

  • How can I fix an ipod disabled?

    Hi guys I have disabled my Ipod... cause, I entered so many codes how to fix? He told me to go into itunes, but I don't know what to do... u can help me pls?

    Click here and follow the instructions.

    (141829)

  • I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that. In the ideal, of group policy or some ways to disable all the computers on the network

    I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that.
    In the ideal, of group policy or some ways to disable all the computers on the network

    Some info here (Group Policy)-> http://www.unidesk.com/blog/how-disable-firefox-auto-updates

    Above article refers to-> http://sourceforge.net/projects/firefoxadm/

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

Maybe you are looking for