How to force the lock of numbers/symbols on initially in an EditField

I have an EditField, and I want to start with NumLock on (although I want to be also possible non-digital text).  So just assign FILTER_NUMERIC is not good enough, and from my own TextFilter does not seem to do that.  Any suggestions?

Thank you Tbilisoft team, good suggestion.  But I think I found a better way.

It seems that NumericTextFilter has some "secret sauce JDE" that indirectly defines the Num lock, so I drifted a SloppyNumericTextFilter which allows the characters I need and did a setFilter on my field change to get the result.

I hope that someone who find it useful!

Tags: BlackBerry Developers

Similar Questions

  • I know how to force the Spotlight for re - index a drive or a folder. But how then do I mail?

    I know how to force the Spotlight for re - index a drive or a folder.

    But how then do I mail? I drag this file to the window?

    Thank you.

    Try re-indexing of mailboxes mailbox. This can take some time if you have a lot of mail.

    Reindex messages           For El Capitan, try looking in V3.

    Reindex messages (2)        See post by Linc Davis

  • How to tie the two serial numbers using test including the tie in the database.

    I have two separate committees, I need to link the serial number too.  One is being tested as a separate unit, then the two are tested together, I need to make sure that I connect them in the database.  Don't know how to do it, looking for any input I can get.  Using a labVIEW vi to request the entry of a Board, and then use information interface to USE testbed for UUT of the hand.

    I have juries, one of the boards, A onboard, was tested by a different sequence file, then A is connected to Board B, and then they are tested as a complete set.  Received a few suggestions on how to save the two serial numbers, but went with a popup message added types of step (modified record results), and then just have the user scann the second number in and it stands as one of the results of the step in the database.

  • How to force the old games in a window instead of full screen__

    How to force the old games in a window instead of full screen
    to lighten my load of vid card and switch between windows without minimize
    This is for vista

    Some games have a function of window mode and others are not.

    as:

    If you put at the end of the section 'target' shortcut in the Sims 2, the command w as follows:

    | "X:\programs\games\sims 2\bin\Sims2.exe" w |

    The Sims 2 will run in windowed mode those that run you it!

    but not all games have the option!

    then go to Google and look for some info there ;)

  • Someone tried to hack my account and now I can't in my mail. How to get the lock down?

    I tried to log on my hotmail and it says it is locked due to too many failed attempts to connect.  Someone tried to hack my account and now I can't in my mail. How to get the lock down?

    Hello

    Answers is a peer group supported and unfortunately has no real influence on Hotmail.

    HotMail has its own Forums, so you can ask your questions there.

    Windows Live Solution Center - HotMail - HotMail Forums Solutions
    http://windowslivehelp.com/

    Hotmail - Forums
    http://windowslivehelp.com/forums.aspx?ProductID=1

    Hotmail - Solutions
    http://windowslivehelp.com/solutions.aspx?ProductID=1

    How to contact Windows Live Hotmail Support
    http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

    Windows Live Hotmail Top issues and Support information
    http://support.Microsoft.com/kb/316659/en-us

    Error message "your account has been locked" when trying to connect
    http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

    Compromised account - access unauthorized account - how to recover your account
    http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

    Hotmail hacked? Take these steps
    http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How to check the locks in the database

    Hello

    oracleDatabase version: 11 GR 2
    OS: Solaris

    How to check the locks on database objects .it can be any lock?
    None Select sql query to check the levlel of objects of database locks? what basis locks occur?

    Please explain on the locks or share notes MOS?

    Rgds,
    Sam.

    Check below sql.

    Select s1.username. '@' || S1.machine
    || ' (SID =' | s1.sid | block him ') '
    || S2. UserName | '@' || S2.machine | ' (SID =' | s2.sid |) ') ' AS blocking_status
    v $ lock l1, v$ session s1, v$ lock l2, s2 of v$ session
    where s1.sid = l1.sid and s2.sid = l2.sid
    and l1. BLOCK = 1 and l2.request > 0
    and l1.id1 = l2.id1
    and l2.id2 = l2.id2;

    http://psoug.org/snippet/locks-view-locked-Objects_866.htm
    http://www.DBA-Oracle.com/t_locked_rows_user_locks.htm

  • iOS 10 how to hide the lock screen

    It is shocking how much personal information is displayed on the lock screen, including my appointments, places of time that I set myself, apps that I use, notifications, etc.  When my phone is locked, I want to block completely and nothing visible until it is unlocked by me. How is that defined?

    Application settings > Touch ID & password > ALLOW ACCESS when THEY are BLOCKED > disable anything you don't want be accessible when the screen is locked.

  • How to force the screen sharing to use Ethernet 2 port?

    Hello

    I have 3 MacPros connected in my studio. MP1 is the master and I use screen apart to see MP2 and MP3. Now, I bought a very quick switch to connect these 3 between them via the Ethernet Port 2 MP1 and at the same time have the MP1 connected to the internet and printers, servers and so on with 1 Port Ethernet. But this is not possible, because the screen sharing will prefer to use the port where the internet/router is connected.

    When ONLY Ethernet Port 2 is active, screen sharing using this port and it works perfectly, but when turn on again once, 1 Port Ethernet 2 remote Mac loses connection.

    Is there a way to force the screen sharing to use Port Ethernet 2?

    It would be useful:

    NC-port-number-on-Mac-OS-x http://superuser.com/questions/148095/How-to-change-the-default-Screen-Sharing-v

  • Satellite C55 - how to force the games to use gforce GPU?

    Hello

    It seems that I have 2 graphics cards on my Satellite C55: a 4000 Intel and a gforce 740 m. I tried to force the games to use the gforce on Panel nvidia configuration, but in the games settings (for example in the Hardware tab of flight simulator 2004), shows only the Intel.

    No idea how to resolve this?

    Thank you

    > it seems that I have 2 graphics cards on my Satellite C55: a 4000 Intel and a gforce 740 m.

    The Intel GPU is part of the Intel
    The nVidia GeForce is the external graphics card and it can be used for the application of strong performance as games

    Check these youtube videos how to do this:
    https://www.YouTube.com/watch?v=WVBEPhE_Osg
    https://www.YouTube.com/watch?v=Zh4HCadTY_A

    You can assign any application to use the dedicated made Intel or nVidia GPU card.
    This can be done in the nvidia Control Panel.

    1. click on start and then Control Panel. Select Classic view in the left side of the window.
    2. double-click on the NVIDIA Control Panel.
    3. click view, and then add the "Run with graphic processor" Option to the context Menu. Close the NVIDIA Control Panel.
    4. right click on the title of the application and select run with GPU. Then, click on NVIDIA processor high performance.

  • How to force the Win7 to see the printer wireless

    I installed the software for my HP6310 printer on my laptop Presario CQ56 but he did not see my printer wireless networking so she set up a second printer connected. How can I force the HP Solution Center to use a wireless please. O/s is win7 SP2.

    Thank you

    Teriel9

    teriel9 wrote:

    I installed the software for my HP6310 printer on my laptop Presario CQ56 but he did not see my printer wireless networking so she set up a second printer connected. How can I force the HP Solution Center to use a wireless please. O/s is win7 SP2.

    Thank you

    Teriel9

    I don't see 802.11 a/b/g/n wireless as a capacity of connectivity for each model (6310 and 6310xi) of your printer. It is most likely the reason why your laptop is not 'see' it.

    There is a bluetooth wireless connectivity. It's a different way of connection that allows only printing capacity.

    You give more than the number of series in your laptop so I have no idea if bluetooth wireless is installed as a standard option. If it is not installed, you must buy a bluetooth dongle to wWalMart and set it up to use that feature.

    Best regards
    ERICO

  • How to put the lock in parallel sequences?

    Hi all

    I'm writing a testseq, which has two parallel sequences. In the two sequences (threads) a same LabVIEW program (Vi) as an Action step will be called. Since the Vi uses an IP address, so it cannot be run more than once at the same time. So I want to make a setting (Lock) like to Teststand.

    is it possible to use the setting lock (How) to allow the as step Vi, which runs once at a time.

    Any response will be appreciated!

    The easiest way, if you want to lock on a per stage basis, is to use the lock on stage settings. See the sync section of the settings on the step step settings panel. You can use the same name of locking with several steps in to do use the same lock. If you want to lock around several steps, use the type of synchronization lock step.

    Hope this helps,

    -Doug

  • How to convert the string with numbers in the table of Boolean 2D

    Hello

    I have input a string with comma separated numbers 1,192 (starting at 1).

    This string must be converted to a table 2D-boolean. Each number that appears should be true, not true rest.

    The 2D table consists of 4 times of 0.47 Boolean values.

    1.48--> [0.47] numbers [0]
    49.96--> [0.47] numbers [1]
    Numbers 97.144--> [0.47] [2]
    145.192--> [0.47] numbers [3]

    If a '1, 49, 97 145' input string put all [0] [0.3] true.

    How can it be easy/fast resolved?

    Thanks for help

    Break the string of numbers in a table of numbers.  (Spreasheet String to Array).

    In a loop For, index with each issue of this table.  Use in the range and Coerce to see if it is in the range of numbers.  (You can put this in a loop For as auto good indexing through the ranges).  If it's in the range, then use subset replace table to activate the corresponding item in a real.  If this is not the case, do nothing.  Maintain the table of Boolean in a shift register.

    Repeat this step for each number in your table.

    (What is a class assignment?)

  • BlackBerry smartphones, how to restore the lock icon

    While trying to move icons the my BB 8830 I accidentally deleted the lock of the device icon.  Can someone tell me how I can restore this icon?

    It is unlikely that you deleted, possible, but probably just hidden or moved into a folder.

    1. on your home screen, press Menu > SHOW ALL, so that ALL DISPLAY is checked.
    2. look in EVERY folder on your device... Applications, instant messaging, downloads, and
    If you don't see it still, look at the Options > advanced > Applications. Do you not see it listed there?

  • How to disable the lock feature in Windows 7

    How do disable you locking on windows 7 it will automatically lock after a short period of time and I would like to disable this option.

    Right-click on the desktop and select Personalize.

    Bottom right, select the screen saver.

    Uncheck the box that says 'Resume to display login screen'.

  • How to find the lock and kill session in order to release it?

    Hi all

    EBS R12.2

    "I met ' could not book record" in our case. How to release the session locked?

    I usually do this by bouncing the apps & db level. Is their subtle way?



    Capture.PNG



    Kind regards

    JC



    Ideally, you should check for locks on the table in question where records are trying to access.

    AFAIK, you must check the v$ locked_object and find sessions.

    Hope this helps!

    Kind regards

    Hugues

Maybe you are looking for