How to forget a network

Similar Questions

• How reverse "forget this network" and make it appear again?

  I have problems with my wifi at home this morning, although it works fine now. I use my hotspot on my iPhone as a backup when I'm having problems with wifi with my main supplier or working remotely. However, I recently got a new iPhone and had changed the password, and it would not connect me automatically when I turned on my hotspot support as he usually does. I was trying to find a way to get networks forget the password so that I can enter a new on the networks, and I managed to 'forget' the iPhone hotspot in windows 8 in an attempt to try to understand how to enter the new password of windows. My wifi at home is now works well, but I need to find my iPhone hotspot for when I need to work on following distance. How can I find once I accidentally "forgot" it? Thank you!

  Just re - turn on hotspot of your phone, and it will appear as an available network.  You can click to connect, and it will ask for the password since you already 'forgot' password on it.  If you check the box "connect automatically", it will also remember your (new) password.

• How to authenticate a network open on 4th generation Apple TV? Or pull up a web browser?

  How to authenticate a network open on 4th generation Apple TV? Or pull up a web browser?

  If you need assistance with a Wi Fi connection = > get help with Wi-Fi on your Apple TV - networks Support Apple

• How to reconfigure wireless network extended with several base stations

  I have a wifi network in an Airport Extreme wired to the modem from our Internet service provider and an Airport Express Terminal extended wireless in another part of the House. I recently added a second Airport Extreme (also extended wireless) to boost coverage in another area of the House. I want to have the Express and the extreme second each wireless connection directly to the base station to the modem to have the shortest path to the main base station, but the Airport utility network diagram seems to keep showing the network of linearly (main Extreme base - second extreme - Express). So, two questions: first, represents the schema of utility Airport the signal path real (linear Express by Extreme II, then to Extreme II/modem)?  And secondly, if so, how to reconfigure the network to have both Express and Extreme II forking the extreme base I directly, rather than having the food by Extreme II, then Extreme I Express. The network showed that the desired branched network yesterday, but today went back into the linear trajectory. I tried a simple drag and drop graphic to move the Express, thinking that surely the Apple would implement such a simple, logical and direct way to manage the network, but no. Have not seen another way to configure the network manually, so any suggestions would be appreciated.

  It is very important to understand that Apple "extend a wireless network" works on signal strength.

  In order to have the AirPort Express and AirPort Extreme to extend the network of the 'main' extreme wireless, two conditions must be fulfilled:

  (1) the AirPort Express and AirPort Extreme extension should both be on the same relative distance of the extreme 'main '.

  (2) AirPort Express and AirPort Extreme extension must both be closer to the extreme 'main' they are to each other.

  In other words, a well put together would have your "main" AirPort Extreme in the middle of the House, with a Terminal AirPort Express on one end of the House and the AirPort Extreme to the other end of the House.  In this configuration, the two airports are about the same distance from the extreme 'main'... and... "" oth extending airports are located more close to the "main" airport that they are with each other.

• How to fix no network service on iPhone 6plus

  How to fix no network service on iPhone 6plus

  Try here > If you can not connect to a cellular or cell - data Apple Support Network

• Can't forget the network

  Using the Apple TV 4. I changed my wifi password and I can't get the ATV to allow me to enter the new password or you forget the network so I can enter the new password. Is it possible to do, runs a factory reset and re-enter all the multiple passwords?

  Thank you.

  John

  Are you able to set up a special network on any of your mobile devices, you can then move to join this network temporarily and then go back and join your home network.

• How to make the network I have a WinbitXP, 32 bit SP 3 to a Win 7, 64?

  How to make the network I have a WinbitXP, 32 bit SP 3 to a Win 7, 64?

  Monday, February 27, 2012 04:40:18 + 0000, Bruce Giese says:

  How to make the network I have a WinbitXP, 32 bit SP 3 to a Win 7, 64?

  Make sure that you create a Working Group. Do not create a homegroup, which
  can only be used with Windows 7 computers.
  Ken Blake, Microsoft MVP

• How many computers can network a drive on a computer on the network using Windows XP Professional?

  How many computers can network a drive on a computer on the network by using windows xp professional

  Hello StephenM007

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Server and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• I have an imac with time capsule - I want to save two pc laptos have the network. How to map a network drive?

  How to map a network drive, so I can save my two portable pc on my imac time capsule?
  Thank you

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/308582

  It will be useful.

• How to retrieve the network icons and the taskbar sound? They disappeared

  original title: extraction and network icons

  How to retrieve the network icons and the taskbar sound?  They disappear from the notification area of the taskbar.

  Hello

  There are different ways to fix it

  read all the information on the link below

  Try Method 1 or 3

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• How to stop a network connection?

  Hi all

  I use the following method to post data to a server and get the answer.

  mNetworkAccessManager->post(mQNetworkRequest, data);
  

  It takes a few seconds for data display and retrieve the response. While the process is in the Middle, if the user clicks a Cancel button, I want that app stop (close or disconnect or cancel) this network connection. But I don't know how to stop a network connection. Everyone please help.

  Thank you

  This should help:
  https://developer.BlackBerry.com/Cascades/reference/qnetworkreply.html#abort

• How to remove the network profile

  Original title: Double Internet access

  I have reproduced the internet access points. My network is one, it is not named or protected, and the other is called another network without any protection. Other users in households show only one when they go to access, but it's the bad access. They show only internet access. There are seven in our region, but only 3 see the same info and signal excellent. How can I remove the 2 bad ones?  Don't know what Internet number I use.

  Hello

  This problem can occur if the wireless network is available in your particular range or coverage area.

  Please see the following link on how to remove the network not searched profile:

  To remove a wireless network connection

  http://TechNet.Microsoft.com/en-us/library/gg252588 (v = ws.10) .aspx

  You can also check the suggestions provided in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-can-i-remove-old-network-connections/679baf9b-0303-4B2C-AF51-92981477a43a

  Important: the above article contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow these steps from the following link: http://support.microsoft.com/kb/322756/en-us

  Please answer us on the State of the question to help you further.

• How to disconnect a network unidentified without internet access?

  My laptop running Windows 7 says I'm connected to a network not identified without internet access and allow me to connect to my wireless home connection, but there is no internet connection is.  The only way that I can use internet on my PC is if I connect my phone and use the internet tethering from there, (which sometimes is not recognized).

  Please help on how to disconnect a network not identified!

  Hello

  You can't disconnect from it.

  It's good because of the inability of the computer to connect to your network.

  It detects that there is something there, but it can connect to it.

  Assuming that it is wireless and the wireless router signal is strong, and it broadcasts its SSID (wireless network name).

  -------------------------

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• How can I configure network server in blackberry phones smart blackBerry bold 9700

  How can I configure network server in blackberry bold 9700

  I want that my third-party applications to access the organization intranet using your organization's network.

  When I tried to change the permissions of third-party application, it shows RIMconnections, interactions, data from the user... don't allow, deny permission is there.

  How can I set thesehttp://docs.blackberry.com/en/smartphone_users/deliverables/23895/Third_party_application_connection...

  Yes, if you read the link you posted, these settings are for OS6 and higher devices.

  Not for OS5 and you're on OS5.

• How can I share network between the computer laptop windows 7 into a window of 8 tab?

  How can I share network between the computer laptop windows 7 into a window of 8 tab?

  Hi HollyMcColl,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the issue you are trying to share the computer network between Windows 7 and Windows 8. I will certainly help you in this regard.

  I appreciate if you could help me with more information.

  -Using Windows 8 Surface RT?

  Note: You can create a Windows RT PC home group, but you can join one.

  I suggest you to consult the help articles and check if it helps.

  A Wi - Fi & networking

  http://Windows.Microsoft.com/en-in/Windows-8/HomeGroup#1TC=T1

  Share files on a home network or your Surface

  http://www.Microsoft.com/surface/en-us/support/storage-files-and-folders/share-files-on-a-home-network?LC=1033

  Share files and folders on a network or shared PC

  http://Windows.Microsoft.com/en-us/Windows-8/share-files-folders

  Get back to us if you need further assistance on Windows 8. We will be happy to help you.