How to get a string changed to be reassessed
Hello, I am very new to TS and do not know if I express the problem clearly. However the question below:
Trying to change a numeric variable before it is evaluated at execution, and what I have is:
Val (searchandreplace ("FileGlobals.I_LB_bin [FileGlobals.loop_BINi]", "lb", FileGlobals.mode [locals. ModeI])) / 2
but after that the replacement seems that the val function can get the value with the new string.
How can I get a string to represent a value and be evaluated after edit?
Thank you very much!
Hello
I'm assuming you are trying to get a variable expression that is evaluated during the execution. I would like to make the following
Locals.Num = Val (Evaluate (SearchAndReplace ("Locals.Var_X", "X", Locals.Control_Num)))
All variables are String, and the output is a number on which you can perform more arithmetic.
Dodnt you need the Locals.Var_X variable at all. I just created during my tests.
Rognard
Tags: NI Software
Similar Questions
-
How to get the string (specified by row and column) of txt file with labview
Hello world
How to get the string (specified by row and column) of txt file with labview
THX
As far as I know, a text file has no column. Be more specific. Do you mean something like the 5th word on line 4, where the words are separated by a space, and lines are separated by a newline character? You can read from the spreadsheet String function and set the delimiter to a space. This will produce a 2D channels table. Then use the table to index and give the line number and column number.
-
How to get the page change event?
Hello.
I know that get changed event document as ISignalMgr-> GetServiceID of CResponder::Respond.
But how to get the event page? average of the event's page add, delete, etc...
Thank you.
Hi K159,.
You can spy on the InDesign debug Test/Spy/SpyPreferences menu for the observer notifications. Can add or remove a page and to analyze the output of the spy.
On the kDocBoss, there is an interface IPageList form you can get the number of pages.
Markus
-
Hi all
I have a problem with my vCO. After each restart of the server or server VC vCO, I lost my values in the workflow that point to the virtual Center. For example, I have a workflow where I define a special vmfolder, special VM as a model, special host where the machine starts, etc. After a reboot the values as "Not configured" and I need to set the values again. Active Directory work values, such as LDAP groups or organizational units.
I have now a script how to get a VM, host, data store and a network using a string with the name auf VM/host /... as input and get an output like VC:VirtualMachine / VC:Host,...
What I need now is a script where I can set an input parameter as a string of the same name by the vmfolder what I ion VC and get an output with the vmfolder as attribute type = vmfolder.
OK, well you certainly store the values in the right place... try asking Christopher for additional troubleshooting.
For the immediate solution and meet your real demand, the following script should retrieve a vmFolder based on the chain: entry required is the 'vmFolderName' which is a string. The return value is "vmFolder".
var folders = VcPlugin.getAllVmFolders(null, "xpath:name='"+vmFolderName+"'"); var vmFolder = null; if (folders != null){ if (folders.length == 1){ System.log("Match found for vm named: "+vmFolderName); vmFolder = folders[0]; }else{ System.log("More than one vmFolder found with that name! "+vmFolderName); for each (folder in folders){ System.log("Folder ID: "+folder.id); } } }
-
How to get the asset changed deployment event details
Hello
I created a deployment listener class to watch the changes to the file system of www, but the event does not provide any information about the assets that have been modified for the current deployment process.
the type of the affected element and repositories concerned return null values.
How to track the active details of file system of www changed using the deployment listener class.
Thank you
Jocelyne MeyerYou must export an rmi to the BCC service that returns the modified files.
Next to the agent, the auditor of deployment should call this rmi service and get the modified files.Here is the snippet of rmiservice at the end of the BCC.
{getDeploymentData()}
RepositoryView view is getDeploymentRepository () .getView ("repositoryMarker");.
Qb = view.getQueryBuilder (generator) from query;
QueryExpression expression = qb.createPropertyQueryExpression ("deploymentId");
QueryExpression val = qb.createConstantQueryExpression (deploymentId);
Query query = qb.createComparisonQuery (expression, val, QueryBuilder.EQUALS);RepositoryItem [] deploymentData = view.executeQuery (query);
for (int i = 0; i)
{
String repositoryPath = (String) ((RepositoryItem) deploymentData.getPropertyValue ("deploymentData")) .getPropertyValue ("source");
String itemDescName = (String) deploymentData [i] .getPropertyValue ("itemDescriptorName");
String itemId = (String) deploymentData [i] .getPropertyValue ("itemId");
Repository repository (Repository) = Nucleus.getGlobalNucleus () .resolveName (repositoryPath);
String uri = "atgrep: /" + repository.getRepositoryName () + "/" + itemDescName + "/" + itemId;If (isLoggingDebug ())
{
logDebug ("uri =" + uri);
}assetURIs.add (uri);
} / / end of course of the items in the repository deploymentData
} / / If deployment
}Peace
Shaik -
How to get the track changes inserted / deleted text?
Hello
I have read the Adobe InDesign CS6 JavaScript Scripting Guide and wrote a JavaScript as below:
var myChanges = app.documents.everyItem().stories.everyItem().changes; var myString = ''; for (var i=0; i<myChanges.length; i++) { var myChange = myChanges[i]; myString += myChange.userName + '\t'; myString += myChange.date + '\t'; myString += myChange.changeType + '\n'; } alert(myString);
My script can get the username, date and change the type.
But the guide does not cover on how we can get him insert / delete changes?
Thank you very much!
The lines I wrote above deleted content work.
Your problem is that not remove anything to show him because you started to follow the story of its creation.
If you first create a story and then start tracking it and add, remove etc. your will see the scripts to get also deleted ones.
-
How to get the string contents of itemByRange?
Hi all
Here's what I'm trying to achieve:
I selected a Word and you want to get the content of the 1st word in the string (the name of a person).
In fact, the selected text is the source * a hyperlink and my goal is to get the name of the person designated by him.
[0] is the same as hyperlink.source.sourceText
Since I can not get the paragraph or line where the selected word is (or simply do not know how to do this), I'm trying to get the full story: from the 1st character of the selected word and moving backward character by comparing its content. When it hits '\r', I know it's the beginning of the line. This way I can get the part of the line, I'm interested with the itemByRange() method, which returns "Array of Character."
Main(); function Main() { var doc = app.activeDocument; var sel = app.selection[0]; GetName(sel); } function GetName(txt) { var lastCharacter = txt.characters[0]; var character = txt.characters[0]; var story = txt.parentStory; var index = lastCharacter.index; while (character.contents != "\r") { character = story.characters[index]; index--; } // Array of Character itemByRange (from: varies, to: varies) // Returns the Characters within the specified range. var arr = story.characters.itemByRange(character, lastCharacter); var str1 = arr.contents[0]; var str2 = str1.match(/^\S+/); return str2; }
My problem is that I can't get the content- str1 - by script. However, I can see in the data browser that it is there. If I click on str1, it appears:
If I type str1 in the Console, I also get:
I also tried to use:
arr.getElements)
arr.getElements () [0]
.silence arr.getElements () [0]
…
etc.
but that didn't work either.
I must be missing something very obvious, but I'm stuck. Can someone help me, please?
Kind regards
Kasyan
Hello
I did something wrong or
App.Selection [0]. Lines [0]. Words [0] .silence
is a 1 Word, you are looking for?
I hope that...
-
How to get back to changes in adjustment brush?
I use LR 4.2 and I have a question about non-destructive Editor, specifically the use of the adjustment brushes. After that I work with an adjustment brush and then continue with my editing that I can't figure out how to make the settings for which was darn earlier on the adjustment brush area. With all the other editing features, I can change something, and then later make a change. For example, I can put 10 highlights and then later I can change bulleted highlights-15 and then later change it to something else. With things, I did with brushes of adjustment well that I did not understand the technique to do. If I select adjustment and then brush click the box that I had changed earlier with an adjustment brush, apparently not reselect this area so that I can tweak it. Is there a way to go back and change the fields selected with an adjustment brush?
Yes, you can change the parameters of the adjustment brush after the fact by opening the adjustment once Brush tool again and selecting the PIN for the mask you want to adjust. The PIN will then have a black dot in the middle and adjustments for this mask will be in th cursor Panel, you go!
-
40L5443DG TV: how to get information while changing TV channels
Hello
My TV is a very good TV. Thank you Toshiba .But there is a but.
When I change the TV station, I don't see the kind of program. I have to press the info button to find out which .
Yes, I can use the guide button and press ok when I want to, but it is difficult to add the info automatically when I change the TV channel?
All the good digital decoder DTT is automatically displayed info.
Should I buy a new digital box and by connecting it to the smart plug ?I'm sure that you will find a good solution.
Best regards.
Mike (France)What do you mean by 'you don't see the kind of program? When you change the channel you see the program number, name and time, after pressing 'Info' you see 'Now' and 'Next' EPG information in the lower band. What is the problem with this concept from your point of view?
-
How to get two strings to write to a text file
As requested above.
Attached is the peak of the problem I have
Thank you
Sorry I'm new to Labview
Concatenate string
Please take the free tutorials or categories of LabVIEW (free with purchase). It's Basic.
-
How to get notification of change of mode programmatic ringtone?
Hi all
Sort for the notification of babysit mode ringtone change?
-
How to get to GREP change all the words in capital letters to capitalize each word
I'm working on a page 100 ePUB + and I need to change the titles of 20 chapter of capital letters only to capitalize every word in the title. Most of the chapter titles begin with a digit, but some are pure text. The chapter titles all use the same paragraph style.
For example: 4 THE HERE AND NOW should be changed to 4. The here and now
For example: EPILOGUE must be changed to epilogue
I can't GREP to do this in the window search/replace suddenly? (I don't see anything in the change to: field that allows me to convert it to.)
-Thanks for any help on this.
Hi Peter,.
Change_Case_With_Style.jsx, original screenplay written by Thomas Silkjær.
Modified by Bruno Herfst in 2011 by adding new features: find a style, expression GREP and cancel.
See: Novelty/Change_Case_With_Style.jsx at master · GitBruno/novelty · GitHub
-
How to get back after changing to 2 cpu 1 CPU 1 processor
I changed the number of processors on this prompt Windows (Windows 2003 SP2) 1 to 2 using the console.
Now, I would go back to 1 cpu.
In so far, I have stop the Windows prompt and changed back the console, its cpu from 2 to 1.
Then restarted the Windows prompt. However, when I go into computer management and devices and computers, it still appears as multiprocessor.
Should what additional steps I take?
Thank you
To return to a single processor inside of windows, you must update the HAL. So in Device Manager (which looks like that you know where it is) right click on multiprocessor and "update driver". Choose any options that tell them to select the right driver manually. Select ACPI uniprocessor and complete the update of the driver. It prompts you to restart, and once you do that it takes only one pure CPU VM. Of course when you do any kind of changes such as a virtual machine, you can take a snapshot of it in a working state before in case something happen which make dead. Should not run into any problems with this, it several times.
Kyle
-
How to get color swatch changes to update in gradients?
When I drop a color swatch on a slope, it is not a link to the color swatch as in a Uni fill.
Nevermind, the inconsistency of the UI with this behavior, because Adobe probably doesn't care, but how to do this?
Creating a shade of gradient is not a solution for me, as I use the same base color in different gradients.
Thank you!
Always set your global swatches.
JET
-
How to get the part of string before and after a character
Hi all
How to get the string before and after the comma character)
Ex: The string contains the value John Kennedy
I need the output as first stirng - John
Second stirng - Kennedy
Create table names (fullname varchar2 (20));
insert into values of names ("John, Kennedy");
insert into values of names ("papa ibra, Shan");
insert into values of names ('Don Bosco'),
Select * from names;
Expected results
FullName firstname lastname
John, Kennedy John Kennedy
Nicolas, Nicolas Shan Shan
Don Bosco Don Bosco
Please let me know how to proceed
Thank you
Hello
This proves what I said before, on 0 and several commas commas.
If we add these 3 rows to the sample data you posted:
insert into names (fullname) values ("tou").
insert into names (fullname) values (' David, Lloyd, George ");
insert into names (fullname) values ('J, R, R, Tolkien");
then the query I posted earlier produced these results:
FULLNAME FIRSTNAME LASTNAME
-------------------- -------------------- --------------------
John, Kennedy John Kennedy
Nicolas, Nicolas Shan Shan
Don Bosco Don Bosco
TOU tou
David Lloyd, George David Lloyd, George
J, R, R, Tolkien J R, R, Tolkien
If you prefer to get these results:
FULLNAME FIRSTNAME LASTNAME
-------------------- -------------------- --------------------
John, Kennedy John Kennedy
Nicolas, Nicolas Shan Shan
Don Bosco Don Bosco
TOU tou
David Lloyd, George David, Lloyd George
J, R, R, J, R, R Tolkien Tolkien
then you just change line 1:
WITH got_commapos AS
(
SELECT FullName
, INSTR (fullname, ','-1) AS commapos-* CHANGED *.
Names
)
SELECT FullName
, SUBSTR (fullname, commapos 1, -1) AS a first name
SUBSTR (fullname, commapos + 1) in the FORM name
OF got_commapos
;
Maybe you are looking for
-
Unable to adtivate «empy recycle bin»
simple (I think) when I click on "Basket", the option to empty is not highlighted (therefore can not empty)
-
How to fix the PC after the left computer update with blue screen?
System said it had to be downloaded an update for Windows Vista. Did the download, restart the computer and only get the blue screen of death. Restart the computer and you try to start safe mode do not work, the computer just restarts.
-
upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP
I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP my PC configuration is like below: Card mother Intel DH61WWProcessor Core I3 2100 3.1 Ghz4 GB OF DDR3 RAMSeagate 1 TB SATA HARD driveOS: Microsoft Windows
-
When the closure of Vista, I pass several horizontal lines of pencil-type 2.0 inches apart on my screen the chart of color screens. I'm looking for the cause of this? Someone else he met?
-
The upgrade of an Inspiron 5348 Windows 10
Hello, just over a year, we bought a 5348 Inspiron with Windows 8.1 down here in New Zealand. It was OK for a few months and one day I totally messed up because I decided to follow the instructions and update Windows - BIG MISTAKE. The computer was c