How to get an extension of the dictionary for all users in a Citrix environment?

Hi all

Under title, I'm looking for a way to get out a dictionary of Firefox (specifically the English (British) of https://addons.mozilla.org/en-US/firefox/language-tools/) to all users in a Citrix environment. Comprehensive silent installation is absolutely best. Because following a recent installation of Firefox users report that this spell check is not working, what appears as a result there is no dictionary to check the spelling on the facility.

It's in a corporate environment, running 6.5 XenApp hosted workstations to multi-server Windows 2008 R2 Enterprise x 64, the installed Firefox info below as collected by the add-on troubleshooting pulled from the browser in the test environment with the same characteristics.

So far, I have tried what follows from this link: http://kb.mozillazine.org/Installing_extensions

"A whole installation will install an extension in the directory of the application rather than in a profile so it will be available to all users. To perform a whole installation, you must not activate as within your Mozilla application installation file. Instead, download and save this record and make sure you close the application completely.

Then follow one of the following options:

   Copy the .xpi file into the <installation directory>\extensions folder. When you start your Mozilla application again, it displays an installation dialog, asking "The following items were found in your Extensions folder. Do you want to install them?" "

Although it seems that the < installation directory > \extensions folder no longer exists at the given location. Find a path of the < installation directory > \browser\extensions but seems it does not behave as said here that I have not received all of the guests. I hope that this method is still applicable in some way and I am just not aware of how this is currently supposed to be handled, but not sure if it is a dictionary rather than a typical add-on will have no effect on the installation overall how can be reached.

Have also tried to http://forums.anandtech.com/showthread.php?t=2268437 , which seems a pretty basic option, but this would have not only to a lot of work to do on a per user basis, but there are also restrictions in place to prevent access to the records of users AppData.

Finally I was looking https://support.mozilla.org/en-US/questions/740545 to push this point across: the les parametres parameters configuration, then use the method above to enforce this on the user end, but did not find anything me.

Any help/advice/shots of elbow in the right direction would be greatly appreciated.

It might be easier to extract the files of two dictionary (.dic and .aff) of archive XPI (ZIP) and place the two files in the folder of Firefox profile for the dictionaries available for all users.

Tags: Firefox

Similar Questions

  • How to disable printing depends on the location for 'all users '.

    I need to disable the "Location-Aware Printing" for "All Users" on the laptops that we use in our company.  Is there a way to do it, or is it one per user (HKCU) power only.

    Thank you

    Mike

    Hi Mike,

    The question you posted would be better suited in the TechNet Forums. I suggest that you post the query in the link.

    http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

    Hope this information helps you.

  • How to change the password for all users in the database

    Hi buddies!

    Could someone tell me how to change the password for all users in the database? I want to set the same password for all users.

    Thank you.

    Nith

    Published by: user645399 on March 1, 2011 14:23

    Write the file spooling
    as

    Make sure that all profiles has password_verify_function with a NULL value

    then

    Select 'edit user' | username: ' identified by ;' from dba_users;

    you will get the output... you just run.

  • Easy way to change the label of the field for all user interfaces?

    How a client would change a label field for all user interfaces that use this field or attribute, which is not really a translation?

    What I have found seems to be that we would need to edit Resource Bundles and it will be much easier in version 8:

    1. the information on Resource Bundles in https://blogs.oracle.com/fadevrel/entry/translating_your_customizations section has this key passage:

    It is a standard open sector (OASIS) XML file with the extension .xliff format and store translated values for strings used by the ADF running. The general process is that these values are exported from the MDS, modified manually and then imported into the new repository. This must be done by an administrator, either via Enterprise Manager or WLST orders according to the screenshot below. It is detailed on the merger application Extensibility Guide.

    2. this blog announcement also says that it will be easier in version 8:

    Currently planned for version 8 is what we call the UI (UI) text editor. This tool will allow the mounting of all the text on the pages and merge request forms. This will provide a search based on an expression or a Word, say 'Worker' and will allow it to be adjusted, tell 'Employee', which then updates all the resource bundles that contain.

    3. I found video, How to customize field labels , but it seems that it is a label of the user interface at the same time...

    WIlliam, Yes, and we have a documentation and/or videos on this feature when R8 is available.

  • How can I block the SMTP for all users but mail server

    I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)

    Thank you

    ___________________________________________________

    6.3 (1) version PIX

    interface ethernet0 car

    Auto interface ethernet1

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    names of

    name 172.16.4.10 pdc

    name 172.168.4.11 llc

    name 172.16.4.11 ftp

    object-group service E-mail tcp

    port-object eq www

    EQ smtp port object

    object-group service tcp - udp terminal

    3389 3389 port-object range

    object-group service mw tcp - udp

    Beach of port-object 367 367

    radmin tcp service object-group

    RemoteAdmin description

    4899 4899 object-port Beach

    object-group service mw1 tcp

    Beach of port-object 367 367

    access-list 101 tcp refuse any any eq smtp

    access-list 101 permit tcp any host object-group x.x.x.251 terminal

    access-list 101 permit tcp any host x.x.x.214 object-group radmin

    access-list 101 permit tcp any email host x.x.x.207 object-group

    access-list 101 permit tcp any host x.x.x.212 object-group mw1

    access-list 101 permit tcp any host x.x.x.211 eq ftp

    sheep ip access-list allow any 192.168.101.0 255.255.255.240

    IP address outside x.x.x.194 255.255.255.192

    IP address inside 172.16.2.1 255.255.0.0

    IP verify reverse path to the outside interface

    IP verify reverse path inside interface

    alarm action IP verification of information

    IP audit attack alarm drop action

    IP local pool mypool 192.168.101.1 - 192.168.101.20

    don't allow no history of pdm

    ARP timeout 14400

    Global interface 10 (external)

    NAT (inside) 0 access-list sheep

    NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

    static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0

    static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0

    public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0

    public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0

    "REM # 172.16.2.13's Exchange with Outlook Web servers #

    static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0

    Access-group 101 in external interface

    Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1

    enable floodguard

    Sysopt connection permit-pptp

    VPDN PPTP-VPDN-group accept dialin pptp

    VPDN group PPTP-VPDN-GROUP ppp authentication pap

    VPDN group PPTP-VPDN-GROUP ppp authentication chap

    VPDN group PPTP-VPDN-GROUP ppp mschap authentication

    VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40

    VPDN group VPDN GROUP-PPTP client configuration address local mypool

    VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6

    client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc

    VPDN group VPDN GROUP-PPTP pptp echo 60

    VPDN group VPDN GROUP-PPTP client for local authentication

    VPDN username * password *.

    VPDN allow outside

    This is your problem:

    Access-group 101 in external interface

    You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.

    To prevent users from going out, you will need this:

    access list permit tcp host exchange_IP OUTPUT no matter what eq smtp

    access list tcp OUTPUT deny any any eq smtp

    Access-group interface inside OUT

    See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.

  • 2 How to save the settings for all users.

    I recently had to move the hearing to a vista machine.

    Now, the Setup is a slight pain in the * mainly because of Vista in Vista.

    But now that I put it in place under my profile how can I keep those settings for all users?

    When a new person connects to this computer, it goes to the built-in default material (which of course didn't is not connected to anything) and not to the sound card that is connected to the mixer.

    So what I'm after, is a way to save all settings (including workspaces) and their default for all users (including users)

    (Please tell me there's a way to do it...) Having to configure AA for each trainee or a guest is going to be an incredible pain in my *.)

    Thank you.

    Audition CS6 and later have the opportunity to create "Machine-specific device settings" that replace a users roaming profile preference files when you connect to jobs at random, but cela was not available in Audition 3.  There may be solutions workaround, depending on your network configuration, but nothing as nice and direct.

  • How to change the value of the Application for all users?

    Hi, I work on Apex 3.2.1.00.12 which is installed on a database of Oracle 10 g Enterprise Edition Release 10.1.0.5.0

    I'll explain my problem... At the beginning of the application, the user choose a year, each year can have 3 status and based on the State to restrict or grant access to certain tabs, pages and options. I put the status of the year selected in an Application element and then I just use an authorization scheme to check if the user can access pages or options.

    The problem is that if the administrator changes the status of the current year (for example, 1-2), users who are currently in the application will have access to the options of the State 1, instead of the State 2 options. is there a way to change the value of this element for all users?

    Thank you.

    Force a disconnection of all users? You can't really affect the values of the sessions other than your own via a browser, and from the point of application is part of a single session...

    You could re-read the value of point of application of its source whenever you load a page or tab game...

    Thank you

    Tony Miller
    Ruckersville, WILL

  • Probems with the service for all users of Windows Installer Agent is not able to run

    Day 2 after the installation of Windows 8 on my desktop PC, all the user accounts with a standard profile are unable to connect. However, my admin account can connect and I get a message saying that the 'Agent Windows all users install' does not work so why accounts no administrator cannot connect.

    I restarted the service but she turns for a few seconds and ends without a message. Several attempts to restart it have failed.
    Is this a problem with Windows 8?

    I just found out that I must be an ADMINISTRATOR to do. Thanks much for the reply

  • Adjustment of the farm for all users

    My apologies if I missed this answered somewhere, but I couldn't find it anyway. I have a thin client, running vWorkspace AppPortal 8.0. Users to connect individually as opposed to a shared connection. Is it possible for me to load the configuration settings of the App portal for all users?  If I have each log and load the config file.  So basically, I try to have the configuration file to load automatically for all users.  Is this possible?  Thanks in advance.

    Hey Kevin,

    Just to give due to what Greg said, there is an article here

    In addition, there is more in detail the process from this page in the Administrator's guide

    http://documents.software.Dell.com/DOC262967

    I hope this helps!

    Thanks, Sam

  • Configuring the desktop for all users

    When you use Windows 7, is it possible to put up desktop shortcuts for all users who like to log onto the computer, it was in XP? Thank you!

    C:\Users\All Users\Bureau. You can copy shortcuts out there, and it will be displayed on any connected user.

  • I would like to offer a shortcut for the program on the desktop for all users

    I'm used to the administration of Windows XP and have upgraded a system for Windows 7 that has multiple users. All users must have access to a specific program (a .rdp connection) shortcut I would have provided using %systemroot%\Documents and Settings\All Users\Bureau in XP, but it doesn't seem to work in Windows 7. Can I change the directory in the folder you want, and yet it does not allow me to add anything to it or a local administrator account, or a domain administrator account. Any ideas would be greatly appreciated.

    The equivalent file in Windows 7 is C:\Users\Public\Desktop. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Is it possible to disable the Muse for all users?

    We will replace 20 + Mac towards the end of the summer that have installed Muse. I understand that Muse allows users to turn on both machines. Is there a way we (administrators) can disable all users who have enabled the muse on these Macs or users need to do it themselves?

    Hi hardinsimmons,

    Please see the article: CC help | Adobe Provisioning Toolkit Enterprise Edition using.

    Kind regards

    Romit Sinha

  • How to get parser extension of the firmware from sony for windows 8 on vgn-ns110e?

    problem is I can't get the necessary driver for this old labtop model vgn-ns110e because what there is no 8 under windows OS combo box titles in the software page and drivers for the labtop.

    VGNNS110E is not supported for Windows 8 by Sony.  You're right, that the drivers are not available for Windows 8 to support page.  Its up to you if you want to install Windows 8, however there may be some features and function that are lost in this upgrade.  Sony does not guarantee the XP / Vista / Windows 7 drivers available for this model to work under Windows 8.

    If my post answered your question, please mark it as "accept as a Solution.

  • How to set preferences of creation for all users - machine laboratory at the University?

    I'll put up for our University editing room which has a CC license "per machine". It is a PC facility. This machine will be used by a class of students who will register with their own credentials. I need to set preferences for the first (video output, default working space planning etc. discs) so that it is the same for all users connecting from us want a consistent configuration for educational purposes and not want to help every student to configure so that it displays correctly on monitors. Is there a way to save this default setting for each user?

    The most important of them is the preferences - reading to set up the second monitor.

    Post edited by: Bruce Cooke

    Just copy the files preference and workspace of your user folder.

    Mylenium

  • How to register ActiveX exe server for all users

    Hello

    I'm aware that with newer versions of the CVI and Windows when you generate an ActiveX exe server, it records only the server for the user profile.  I read one white papers OR who said that computer administrator may register the server for all users.  I am an administrator for the development of PC we use.  I went to the command and he ran as the administrator of the PC.  I then navigate to the path of the exe.  I published the regserver command.  Unfortunately, I am unable to distinguish if the server exe was registered for all users or if it combined again to my user profile.  Our server exe is called by another program of the CVI.  To validate if the server exe had been registered for all users, I had a user who had not built server exe on the development PC connection and try to start the server within its own CVI program exe.  When this has been attempted, the user receives an error "class not registered".  The user was not able to successfully launch the exe of the server until it has built on the PC itself.  It does not appear that the administrator regserver command worked to save the exe file of the server for all users.  Is anyone aware of any steps that I may have missed?

    I'm working on a Windows 7 with Service Pack 2 for LabWindows/CVI 2013.

    Thanks in advance.

    You will probably have to use Google.

    http://social.msdn.Microsoft.com/forums/en-us/0022ca21-CAA2-4be5-b519-757ff9daf7fb/how-to-register-3...

    or maybe http://social.msdn.microsoft.com/Forums/vstudio/en-US/4fb96971-53a1-4e25-bc75-b49cfaf4d574/problems-...

Maybe you are looking for