How to get back to the MacBook Pro after reformat

Hello!

I have a problem with my MacBook Pro 13 inch end 2011 laptop when I press command + R (recovery or something of the island who), restart my laptop. Then I have to wait 4 hours to do before going to disk or something.

But the problem is I can not reinstall OS X Lion and also internet connection does not work I don't have Apple Care subject.

I'm p * ssed because it's my fault for reformatting my laptop computer in 1st place because I have so much stuffs that slow down the laptop but I transfer my animals in my external HD storage before I have reformat my laptop.

So why I can't return to my laptop? I miss to go online or use the site

I'm really sorry for reformatting. I just wanted to return to 500 GB, so I can have some front rooms at re - install software.

Can someone help me how to get everything back to normal as when you first bought your MaxBook to put up everything? This is my first time trying to figure to return to normal of the program that I can't put in place or sign or whatever.

I'm still confused. I can't afford to buy a MacBook Pro.

Install or reinstall OS X from scratch

Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

HD recovery start:

Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

Erase the drive:

1. select in the main menu disk utility and click on the continue button.

2. once the charges of THE select your boot volume (usually Macintosh HD) in the

list on the left. Click on the Erase tab in the main window of THE.

3. set the type of format Mac OS extended (journaled). If necessary, click

Security and button all the option data from scratch in a single pass. Click

the clear button and wait until the process is complete.

4 leave FROM and return to the main menu.

Reinstall OS X: Select reinstall OS X and click on the install button.

Note : You will need an active Internet connection. I suggest to use Ethernet if possible

because it is three times faster than wireless.

This should install the version of Mac OS X that you had installed it.

Tags: Notebooks

Similar Questions

  • How to get back to the Inbox folder after deleting a message instead to open the next message?

    I don't want to open the next message in my Inbox, when I delete a message. I want to go back to the Inbox folder.

    I had the same problem, was driving me crazy until I found that I could enable a toolbar of menu by right-clicking on the toolbar and checking "menu bar". This brought menus that I was familiar with, including the "Tools". Then, I was able to apply these tips from the help system:

    Specify what happens to the message window when a message is deleted
    

    Location of the menu: tools | Options | Advanced | Read and display
    Check the "message close window/tab on move or delete.

  • How to get back to the starting point after insertion to create

    Hi Experts ADF,

    JDeveloper 12 c,

    I have a home page with a table. In the table, there is a button to create. If the user clicks on create a button, a window opens.

    In the context menu if the user clicks on CreateInsert 2 times not save anything and close the pop-up window. I see these 2 empty lines in the home page as well.

    So, how to avoid these 2 lines when the user closes the popup.

    Thank you

    Ray

    Yes, it is a. call this method and provide the current row of the iterator as a parameter:

    public void refreshRemoveNewRow(Row row) {
        if (((ViewRowImpl)row).getNewRowState() == Row.STATUS_INITIALIZED) {
                row.refresh(Row.REFRESH_UNDO_CHANGES +
                            Row.REFRESH_REMOVE_NEW_ROWS);
        } else {
                row.refresh(Row.REFRESH_UNDO_CHANGES +
                            Row.REFRESH_FORGET_NEW_ROWS);
        }
    }  
    
  • I can't use Roboform with 4.0 beta 10, so I can't use Firefox. How to get back to the beta version 9?

    I can't use Roboform with 4.0 beta 10, so I can't use Firefox. How to get back to the beta version 9?

    I think that there is a little more for it, but here's a solution that seems to work. After the installation of Roboform 7.1.7, go to: http://www.roboform.com/platforms/browsers/firefox and scroll down to a table listing the three browsers identifying the XPI file to load if it was not loaded automatically. Click the http://www.roboform.com/dist/roboform-firefox-3-4-frozen.xpilink. Firefox will ask you if you want to allow this should be installed. Let him. Finish installation, restart Firefox 4.0b10, and you'll see a Roboform 7.1.7 toolbar works. I did it on two computers, and everything seems to work.

  • How to get back to the old cat, without meeting places

    The new listing - for contacts - Hangouts appeared a few days ago. I had not asked her. How to get back the old cat and list of contacts?

    Sounds like a question for any site that turns "old cat and meeting places.

    If you tell us what Web site which is, maybe someone here knows and might be able to help.

  • How to get back to the grid panel

    There must be a command key to move between the Panel grid or wrap and the keywording Panel, isn't there? I don't want to use my mouse. I just want (if I'm in the grid panel I just move right or left arrow), select the photo and then go to the Panel (command-K) keywording and then GET BACK to THE GRID PANEL so I CAN CHOOSE THE NEXT PHOTO. I looked at many articles and lists of keyboard shortcuts for Lightroom 4 and can't seem to find the answer.

    [ESC}.

  • How to get back to the user account administrator privileges?

    Original title: lost the privileges on the computer at home. How ca I get it back?

    I am the only user on my home computer, using Windows 7 Professional. When you turn on the computer, always offered welcome my administrator screen and waited for a response and normal user accounts before continuing. Rarely need to log on as an administrator and have to go back to the computer just to press a button before it continued its long initialization has been frustrating. Want to remove the log on option user I did it via the Control Panel [don't know how, now!] so now I can turn it on and let it start in his own good time without further interaction from me, which is great.

    What is not big, is that I lost all administrator privileges, then any time the area UAC appears asking if I want to continue with the program and I need to answer YES, it won't let me as the Yes box is grayed out.

    The management of the computer control panel, I can get local users where I can see that my backup Administrator account is disabled. If I click on the box to reactivate the account, access is denied, so I can not turn on the account.

    Help, please!  I would really think my administrator account to return once again, without having to turn off every time.

    Thank you for your expertise in advance.

    Dave

    Here you go:

    1. Set your BIOS so that it uses the DVD drive as its primary boot device.
    2. Start the computer with your Windows 7 repair CD.
    3. Press a key when prompted to boot from the DVD.
    4. Select 'PC Repair' in the menu.
    5. Select 'Repair' when prompted.
    6. When you are prompted, select System Restore.
    7. Configure Windows to a point before you made the change.
    8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.
  • How to get back to the standards?

    Hello

    Still very new to the first Pro CC but to venture into the unknown.

    I received instructions on how to set the first Pro CC in order to export a video with an Alpha channel. I did it successfully.

    I now need to return to the export standards that the Prime Minister is come up with and/or configured to be able to export a sequence that can be imported later on Premier Pro but on another computer (both using Windows 7 Pro) with the best possible quality and without loss of video quality.

    Thanks for the help

    Bert

    Which is just to choose the right codec &... settings that you choose whenever you export. To do this, I'd probably using Cineform codec distributed by people from GoPro... I think PrPro "comes" with it, you can change it at least, and if it is not in your export box go to their site & download it.

    GoPro Cineform for QuickTime in Windows player...  http://CineForm.com/GoPro-CineForm-decoder

    It's a codec of low compression designed to get every last bit of quality of the image rather than worry about a lot of compression. Easy REAL changes and also does lose any quality... period. On the Quicktime tab on the dialog to export media, and then use the menu preset drop-down to select... There is two with Alpha, 10 bits without... as shown here.

    Neil

  • How to get back to the logo fox & original world?

    He was replaced a few days ago with the word FOXYEAH and 6 people under it.

    It is a temporary marketing campaign to get people to enroll in the program of the friends of Firefox and the foxyeah campaign. He goes back to the normal logo in a few days. You can also change your homepage to something else.

  • Show now messages "to: me" instead of the name or email address and I want to know how to get back to the way it was.

    I use several yahoo email address and it was always very convienent to see if it is a personal or business related message by simply seeing the To: line. Now suddenly all I see is 'me' and it is not at all useful. I brought no changes nor authorizes it to do. I don't even know if it's a Firefox problem or a problem with Yahoo. I would like to know how to change back to show e-mail address or full name.

    Hello shackiraq, you must contact the support of yahoo on this topic - firefox does not handle your emails, but makes just a website as it is provided by the server of a webmail service.

    https://help.Yahoo.com/kb/mail-for-desktop

  • How to get back in the car Fusion 3 TB to the original scores?

    I just had my Fusion 3 TB 2012 end iMac drive replaced under warranty and have encountered a problem after trying to create a 2 TB Bootcamp partition.  For some reason, I ran into problems installing Win 10 after having successfully created the partition, so I decided to use the Bootcamp assistant to delete the Bootcamp partition, but it threw an error message before the end!  That left me with a disc Mac HD 1 TB and 2 TB of space utility disk refuses to acknowledge, and I don't see a way to extend the Mac HD partition to fill this space?  Is there a simple way to restore the drive to its original state or what I need to use commercial partitioning software to do this?

    Apple did not provide an easy way to recover from this condition. Please read this message before doing anything. If you don't feel confident that you can follow the instructions, ask someone more experienced to help you. One option is to take an appointment 'Genius' on an Apple Store.

    This procedure applies only to an iMac or a Mac mini with a drive installed in the smelter. If one of the internal drives (SSD and HDD) has been replaced by a hot spare, ask for other instructions.

    You must read these instructions while no web browser is running, so either print them or load them onto another device before you start.

    1. all the data on the internal disks will be deleted, including Boot Camp data, which are not saved by Time Machine. You need at least two complete and independent backups. A backup is not enough to be sure. There are ways to back up a computer that is not fully functional. Ask if you need advice.

    2. you will need to start one recovery system other than the one on the internal hard drive (if he has one.) There are several ways to do so.

    a. If you have a backup time of the Machine (not a network backup), or a compatible Mac OS X installation on an external drive, then you should be able to start it by holding down press option key to start ringing. Select the external hard drive in the row of icons that is displayed. I mean by "compatible", an installation running on the machine. A version of Mac OS X that is older than the machine is not compatible.

    b. If you used Recovery Disk Wizard (or can use it now) to prepare a system recovery on a USB flash drive, you can start that by pressing the C button on the ring. No icons will appear. Startup will be much slower than usual.

    c. start the Internet recovery mode by pressing the key combination command-option-R to start ringing. Release the keys when you see a spinning globe. Select a language, if you are prompted.

    Note: You need an Ethernet or Wi - Fi connection to Internet to use the features of recovery network. It will not work with modems USB or PPPoE, proxy servers or networks that require a certificate for authentication.

    3. disconnect all other external storage devices.

    4. in the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history, but you won't need them. Load this web page.

    5. triple - click anywhere in the line below to select this option:

    diskutil cs deleteLVG `diskutil cs list | awk 'NR==3{print $NF}'`

    Copy the selected text in the Clipboard by pressing Control-C key combination.

    Quit Safari. You go back to the OS X Utilities screen.

    6. in the menu bar, select

    Utilities ▹ Terminal

    Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination. Wait for a new line ending with a number sign (#) to appear. If nothing happens, press the return key.

    Quit the Terminal must be returned to the main screen.

    What happens then depends on what version of recovery that you are running.

    ☞ If the machine came with OS X 10.10 ("Yosemite"), 10.9 ("Swat") or 10.8 ("Mountain Lion"), and you're in the recovery of the Internet, please take step 7A and proceed to step 7B.

    ☞ otherwise, go to step 7A and 7B step.

    If you are unsure which version of Mac OS X, the machine came with, search for it on this page.

    After taking these steps apply, you must have a reader of empty Fusion named 'Macintosh HD' on which you can perform step 8a or 8b step.

    7. repair of the Fusion drive (see "Troubleshooting" on the linked page.) Quit disk utility.

    7. Enter the command below as in steps 4-6:

    N=Macintosh\ HD; for d in /dev/disk?; do o=`diskutil info $d`; [[ ! "$SSD" ]] && grep -lqw 'APPLE SSD' <<< "$o" && SSD=$d; [[ ! "$HDD" ]] && grep -lqw 'APPLE HDD' <<< "$o" && HDD=$d; [[ "$SSD" && "$HDD" ]] && break; done; diskutil cs create "$N" $SSD $HDD && diskutil cs createLV "$N" jhfs+ "$N" 100%

    It is a very long line, and you won't see it on the web page. Be sure to select the entire line, not just the part that you can see.

    Leaving the Terminal.

    8. If you have a Time Machine backup, connect the device to backup and restore your data. If you have saved to a network like a time Capsule device, it must be connected automatically.

    8B. If you do not have a Time Machine backup, or if you can not restore from Time Machine backup that you do not have, install OS x Restore data later in The Migration Wizard.

    In the Internet recovery mode, you install the original version of Mac OS X comes with the machine. If you have upgraded the operating system on the App Store, you will need to do it again.

  • How to get back to the original appearance of the theme in Firefox 3.6?

    A long while back, I changed the theme skin. How do I change to the original theme? Thank you.

    1. On the Tools menu, select Add-ons to open the Add-ons Manager
    2. Go to the themes section
    3. In the list of themes, click the default theme
    4. Click on the button "Use Theme".

    For more information about using themes, see https://support.mozilla.com/kb/Using+themes+with+Firefox

  • Spider Solitaire: Deck Apprearance - how to get back to the Original by default/bridge design/color

    After reviewing the different bridge designs and colors, I decided I want the original bridge by default return, others are too distracting.  But there is no option to return from the 'game' - "Change Appearance" list drop-down option.  Can I go back to the original bridge, if so, how?  Thank you

    Seasons is the blue bridge, only that I see. It is possible that your computer manufacturer had custom maps, then when you change the appearance, the changes were lost.

  • Can someone tell me how to get back on the group that I closed by mistake?

    I I'm just learning and accidentally closed some of the control panels and cannot get back them. I tried to save the project, closing and re-opening, hoping it would all go back to normal... but no luck. Help!

    Menu window > workspace > handed saved available

    MtD

  • How to get rid of the bubbly voice after noise reduction?

    After the noise reduction it is somewhat an echo so I used this method How to prevent Echo for the noise reduction to get rid of it and, now, my voice became very sparkling. No way to get rid of the bubbly voice?

    Which of the methods described in this thread that you use?

    If you read beyond the first post, you will find that many of us in complete disagreement with the working method first described - doing one pass with the sliders for NR and reduction in the value of values is a recipe for the sort of things you describe.

    Your best bet will be to return to your original file and repeat the noise reduction.  This time, playing in the past 4 or so light, rather than trying to do it all at once.  In the "Advanced" tab, set the size of the FFT to 2048, the NR slider at 20% and the reduction to 10 dB.  Apply the effect, then capture a new impression of noise with the size of the FFT to 16384 then 4096, and 8192.  You can vary the slider up and down like so requires, but each get subtle.

    Working this way should allow you to achieve your NR without echo or bubble effect you mention.

Maybe you are looking for

  • The magnet links is no longer open in Transmission

    Dear good popular support, I'm running Firefox on Linux Xubuntu 11.10 22.0. I used to have Firefox to open links magnet in my client of Transmission, but something happened. I don't know what. I tried the normal stuff to go into preferences-> applica

  • Firefox 6.0.2 impression cmd opens windows exployer

    message error "an unknown error has occurred." does not print in firefox.

  • When I try to download a program Satellite L30 - 105 Vista restarts

    HelloEvery time I try to install a program on my computer, as my printer or I download something, my computer turns off and samekh. Does anyone know how can I stop this?Thank you

  • T430s Windows 7 not genuine

    Hello I bought a Lenovo T430s, 2355-CTO type, it is still in warranty (already checked it), and for the last 20 days, I get "Windows is not genuine". It work perfectly during the last 4 months, but all of a sudden (I guess an update of Win) starts to

  • Support webcam and touchpad for G530

    So, as I went through the drivers listed on the lenovo Web site, I noticed that there is no support for either the webcam and the touchpad. I have a basic use of the touchpad, but cannot use the scrolling features, and I can't seem to access my webca