How to get Bluetooth on Portege R100

Similar Questions

• How to get bluetooth on my computer hp laptop g56

  How to get bluetooth on my computer hp laptop G56

  Unfortunately, after looking for HP Support and drivers; I found 11 products part of the major HP G56 series - however after viewing each of them - all models had drivers for Windows 7. and some even had for Windows XP - BUT there is no Windows Vista drivers for one of the 11 models.

  However, Windows Vista is a bit like Windows 7; and although I've never tested Windows 7 drivers MAY work correctly for Windows Vista.

  Download Windows 7 Bluetooth drivers and try to install.

  Do you have you format the drive and installed Windows Vista?

  Please note that the above drivers for Broadcom 2070 Bluetooth.

• HOW TO GET BLUETOOTH

  I have a 17 e105sa pavilion laptop how can I bluetooth

  Thank you PEP

  Hi annexe999,

  You can get a bluetooth adapter or dongle, here is How to use a... hope this helps!

• How to add bluetooth to Portege M200

  Hello world
  I recently acquired a m200 without bluetooth and intel 2100 b Wlan functionality. I would like know what I do to upgrade to ensure that both bluetooth and wlan 2200 b/g. The WiFi network should not be a problem, because it is a replacement of a wireless mini-pci network card, but how do I get the bluetooth?

  Thank you

  Kenno

  I m wrong but AFAIK the Portege M200 already supports BT and it must be not upgraded with the add-on of BT.

  Check the bottom of the device, if there is a label of BT

• How to get down a Portege 7010 of W2000 in W98?

  I have a 7010 locked with CD in a docking station, Windows-2000 which is bad. I have a W98 CD to rebuild the OS from scratch, but can not find how to start the machine from the CD.

  If the CD is bootable (Windows98se CD's)

  also, press ESC F1 then several times when the computer starts... so if you get to the SETUP (BIOS)... in the right colum upstairs standing some bootorder about: CDROM should be first... MEADOWS END-> close YES...

  If the CD is in your drive - you should start over after the INTEL LAN manager showed... I guess you may have to press return or something begins it starts the CD - he writes "If you want to start press any key" or something like that...

  But Bein, if your Windows 2000 is installed on an NTFS partition you can not see this in Windows 98 without the tool of drive NTFS - so BACKUP before any other thing...

• How can I open the Portege R100?

  I unscrewed all the screws from the bottom of the envelope and also noticed the small latch inside the battery compartment. The back of the case still seems firmly well attacheh and I would appreciate any pointers on what else to remove?

  The reason for the operation, it's that I want to improve the 802.11ab internal controller for a Gigabyte WIAG01 Mini PCI (108mbps).

  Any suggestions?

  Hello Vahl

  In my opinion, it is a very bad idea to open this sensitive book on your own. A small mistake can damage hardware or different connections.

  Anyway, as far as I know the wireless card is placed under the keyboard on the right side and it is fixed with two screws. As far as I know the keyboard should be removed from the first. After that, you can see these two screws.

  Good luck!

• Portege R100 - burn my own recovery CD

  Hello
  I tried to reinstall Windows on my Portege R100 for weeks and finally discovered

  http://support.toshiba-tro.de/KB0/TSB5100S70004R01.htm

  It is said that if you have a CD player of UBS by Toshiba or something equivalent and appropriate recovery CD, you can boot from the recovery CD to reinstall Windows.
  But I have the recovery CD is not that one "appropriate". In this case, the above document suggests to download the bootimage for floppy drive, then

  "you can make your own CD for recovery bootable directly with this bootimage, if extract you it and use as (1, 44MB) floppy emulation in your Favorites, engraving software and combine it with data from the original CD."

  Can someone explain what this means? Once you unzip the bootimage file attached to the document, you will get a .exe file, which, when you click on, trying to put a bootable diskette. How can I use this .exe file to create a bootable CD?
  Thanks in advance.

  MJ

  Hello

  On this Toshiba document described how you can preinstall your Portege R100 using original recovery (already delivered) media. As you can see you can use Toshiba external drives listed there and on this installation path is very easy because the designed Toshiba recovery image already contains the necessary driver for Toshiba external drives.

  If you n t have Toshiba drives but start other USB drives, you can retrieve the device using Toshiba drive.

  There is nothing on your recovery media burning on this document. As far as I know, you can do so by using some applications like Norton Ghost (I use it) and if you have an external hard drive. Application of Norton Ghost to make the recovery image on the HARD drive directly (I prefer this option and save the image on the D partition) or burn it to CD/DVD bootable.

• How to get the CD from recovery for my Portege R100?

  Hello friend

  I have a problem here:
  can us or I somehow get a replacement recovery cd coz my uncle recovery cd is lost?
  My portege R100 unable connect to the Welcome screen the only thing is to reinstall using recovery cd coz, if I installed it using another cd (not the recovery cd) it always come BSOD:
  "* stop: 0x0000007B (0xF7978524, 0xC0000034, 0x00000000, 0x00000000) he ' says that I have to check the virus problem is I can not connect to windows after the Welcome screen."

  Thank you

  Hello

  You can get the form from recovery CD Toshiba service partner in your country.

  Just FYI; the BSOD appears usually due to hardware malfunction or a serious software fault.

• How to install the OS on Portege R100?

  I have a Portege R100 by the usual means. It has been formatted so it doesn t have something about that. I read there are three ways to install an operating system. PC with USB CD-rom card, I tried without success since the pc card is a 32-bit card.

  I ve tried to locate some computer dealers but they've all sent me away. Where can I buy (live in Trondheim, Norway) good CD with the specific pc card that would make me start the CD of Windows XP Home edition? Apparently Toshiba doesn't have a webshop with accessories. Is there another way to install Windows XP Home edition?
  Can I boot from a USB pin if I copy the CD of Windows XP Home edition for that?

  IM desperate please answer :)

  Lars cordially

  Hello, Lars

  If you want to use the original recovery media in this case, you must use external Toshiba card PC CD/DVD. The recovery image contains disk driver and because of this, the reader will be recognized correctly and start procedure will work automatically.

  If you want to use the own external device, you must use BACK pilot to first use and after use of the drive. On this forum, one user recommended to copy the contents of the full version of Microsoft on the second partition CD and after that start the installation from there.

  I didn t try so far and cannot give you more specific information how to proceed.

  Bye and good luck!

• Portege R100 Bluetooth Stack needs license number

  I had to have a new hard drive installed on my laptop recently and since that time, I downloaded the latest driver for the Bluetooth stack from Toshiba web site and used with my USB bluetooth dongle. It worked OK for a while but it must note it on the bluetooth software stack was that he was the evaluation software only and that he would need a license. I can't find out how to get the license! Bluetooth on your laptop has always worked from day 1 to have the laptop and has only been disabled after the re - build due to the new hard drive!

  What? I never heard about the BT stack license key.
  Are you sure that you have installed the proper software?

  Bluetooth driver is free and you can download it from the page of the Toshiba driver!

• Portege R400: How to get embedded HSDPA 3 G working

  Does anyone know how to get the Embedded R400 HSDPA 3 G working?
  I put a SIM from work in the slot under the keyboard, but when I click the mobilink software, that nothing is happening.

  Thank you

  Hello

  I found something that may be of interest to you. It is about 3 G on your laptop:

  When you insert SIM the laptop must be turned off, because normally hot - plug the SIM card does not work
  The 3G module is set on/OFF with the cut-out like the other two standards wireless WLAN and BT wireless
  By default, the wireless switch is set to OFF
  Your laptop is preinstalled new FN + F8 tool with which you can switch all devices or on/OFF switch, none of the 3 devices individually
  After each start of the laptop (if the message was not disabled) there will be an information window informing you that the 3G antenna shuts off if the Tablet PC is used in secondary portrait mode (for Tablet laptop computer only)

  Please check it and also read s manuals carefully. It must be described how to use 3G on your laptop Portege.

  Good bye

• How to get the bluetooth turned on the Satellite X 200 - 20 s

  Hello

  Can someone tell me how to get the bluetooth enabled on the X 200-20?

  Thank you

  Hello

  Did you try FN + F8 key combination that switches between the WiFi and BT?
  This should allow the BT on your wonderful X 200.

• Portege R100 - impossible to reinstall my Bluetooth

  I had to reinstall my computer (Toshiba Portege R100) since the factory installation discs and now I can't reinstall my BT
  I use the SD Card3 with PA3370 part number.

  My problem seems to be the inabililty to install the SD host upgrade.
  I downloaded the file sdhost-204030514-wxp-w2k. I have used this file before on this machine, but Windows does not run the installation program.
  When I unzip the archive, I can right click to install on the tsdhd.sys but further, nothing happens.

  All my other relocations worked perfectly and the only thing I can think is that XP SP3 does not like this installation package (my last restoration was under SP2).

  Any suggestions for a workaround?

  So, if I understand you correctly, you are not able to install the devices, bluetooth, and Player cards, right?

  For the card reader. I think you should just download following of this site: http://eu.computers.toshiba-europe.com (Support & downloads)

  -Cardbus driver
  -SD Host controller
  -SD memory card
  -Format SD memory

  Download battery bluetooth for bluetooth.

  Make sure that all downloads are unpacked, before installation and choose the appropriate model for laptop computer and operating system.

• Hi, does anyone know how to get my sony vaio bluetooth works please, I tried to update etc, but he won't find not all bluetooth devices.

  Hi, does anyone know how to get my sony vaio bluetooth works please, I tried to update etc, but he won't find not all bluetooth devices.

  Hello

  Check with the support of Sony as their problems, driver updates, other reasons could known BlueTooth
  is not functional or taken in charge.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  =====================================

  If bluetooth is supported on your model that these could help.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to get the name of the bluetooth device and the name of the bluetooth device address device class?

  Hi all

  Can I know how to get the bluetooth device name and the name of the bluetooth device address device class?

  Example:-if my bluetooth device address is :-98:EB:CD:01:1F::90 then how do I get my bluetooth device name?

  I hope you understand my problem. Let me know as soon as possible.

  :

  Thanks for the reply.