How to get digital signl in labVIEW

Similar Questions

• How create/get ColorPal driver for LabVIEW?

  Hello!

  I am a french student in England and I'm working on the Starter Kit 2.0 (with DaNI Robot). My company wants to turn the feature of prevention of obstacle (thanks to the ultrasonic sensor) into a follower of colored (thanks to the Parallax ColorPal) line. So I want to program in LabVIEW but I don't really know how to get the driver ColorPal or screws to connect between the sbRIO 9632 and this color sensor. I use the same yarn as the ultrasonic sensor to connect the ColorPal.

  Thanks in advance for your help.

  Concerning

  Kevin

  Hey Kevin,

  I took a glance at the ColorPal documentation and it seems that it is programmed using e/s series. As you can see below:

  

  You will need to do, is use series found below the palette of e/s of instrument LabVIEW VISA and functions to communicate with your ColorPal. I recommend that you download their website ColorPal documentation and study the syntax of the commands that you will need.

  Also for reference here is a good place to start when programming of VISA.

  Kind regards

• How to get current USB in Labview

  Using the Windows Device Manager and selecting the USB HUB, you are able to see the current consumption of your USB devices.

  See attached picture.

  Is it possible to get this value programmatically using Windows DLL calls in Labview or Labview property?

  Thank you

  You can see what the unit is ESTIMATED to consume.  This is not a value of actual consumption.

  It is possible to achieve this programmatically, but I doubt it will give you the information you are looking for...

• How can I get digital signals (interface UART) with a microcontroller with NI USB-6008?

  I have acauired a few analog signals by A/D (3 channels). I put each scanned data on 3 digital output with a microcontroller. I want to see if it is possible to import these digital outputs 3 to a PC via a USB-6008? It's like the connection of the output to the digital input of the USB-6008 and import the 3 channels simultaneously to LabView? Do I need to use some other hardware like USB-8451 and connect the clock of the MCU to USB-8451?

  Saraydin,

  The digital I/o on the USB-6008 is a software program only, so unless your signals are rather slow, it probably will not work for you.  In general, the procedure would be to connect each signal to one of the digital lines on the map and then set up a digital entry into LabVIEW task to read the three channels.  If you use a device that has clocked by the digital i/o hardware, you then your input clock signal and use it as the sample for the task clock.  Here is a list of USB devices supporting DIO clocked by the hardware.  Also, there is an example that comes with LabVIEW, which shows how to do this.  You can get to it in LabVIEW by going to help > find examples.  When the example Finder window opens, navigate to hardware input and output > DAQmx > digital measures > Cont read dig Chan-Ext Clk.vi.

  The 8451 is specifically for I2C and SPI, and would be great if you try to make one of these protocols, but otherwise I would recommend the devices in the list I linked above.

  -Christina

• How to Set Digital i/o status of Watlow EZ - Zone RM on 'ON' in LabVIEW?

  I have an EZ - box RM Watlow controller and here is the driver:

  http://www.Watlow.com/downloads/en/software/Watlow%20EZ-zone (R)%20LabView%20Driver%20a.zip

  I have 16 e / s digital connected to the CRDD and I need to use to trigger the SSR.

  so here's my question

  How to Set Digital i/o status of Watlow EZ - Zone RM on 'ON' in LabVIEW?

  What ID setting should I use to replace the OFF state (62) (63)?

  First I thought that I can write "63" in the ID parameter "6007", and it does not work because it is a read only parameter. Is it supposed to be a way I can just simple it switched off to change on?

  Thank you for answering my question.

  The OID cannot be set directly. First a block Variable must be digital and connected to the block of DIO mode. Then changing the numeric status can be changed (63) to off (62).

• Does anyone know how to get data from a web service of Labview with ajax or JSON?

  Hello

  I try to use ajax and json to service Web restful which I build with the labview. However I get errors

  For example. I create a web service from a labview vi (z = x / y http://localhost: 8080/math/divide/5/20 will give {Z: "4,000,000"})

  I get errors for the attached html files.

  Does anyone know how to get al labview WebService with ajax or json data?

  Thank you... Eran

  
  

• How to get the string (specified by row and column) of txt file with labview

  Hello world

  How to get the string (specified by row and column) of txt file with labview

  THX

  As far as I know, a text file has no column.  Be more specific.  Do you mean something like the 5th word on line 4, where the words are separated by a space, and lines are separated by a newline character?  You can read from the spreadsheet String function and set the delimiter to a space.  This will produce a 2D channels table.  Then use the table to index and give the line number and column number.

• I have a photography teacher program Adobe and must add Adobe Illustrator for the BSc SAID curriculum I am on at the Academy of digital skills in Dublin, Ireland how I get the student discount to add Illustrator to mentoring rate?

  I have a photography teacher program Adobe and must add Adobe Illustrator for the BSc SAID curriculum I am on at the Academy of digital skills in Dublin, Ireland how I get the student discount to add Illustrator to mentoring rate?

  I don't know if we can add a program, or you if have to go to a subscription 'all' education

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• How to get constants into Labview which will have an impact on the graph?

  How should I enter constants in Labview where x and are dependent on them? Ex. Say I create a graph of voltage vs time and I want to have of the constants as trigger (for example, wanting my chart to start the recording of the data when it reaches 20 volts and stop recording after 20 volts). I would also like to have an as a constant time interval. I have no idea how to proceed in labview, I'm looking for some kind of help. Thank you

  What I was explaining before, it was OK, however do not take into account the image.

  Here is the code that you can use instead.
  

• Satellite C660: How to get the HDMI port?

  Hello

  Could someone tell me how to get hdmi on the laptop as the laptop has a hdmi port

  Thank you

  Hello

  But what C660-xxx you? Perhaps you could use a
  It is not possible to add arbitrary ports.

  Ports are part of the motherboard and if the laptop does not provide an HDMI port, so, you will not be able to use that :(

  Of course, you could use a device that would be to convert a digital video signal, but they are expensive and in my opinion not worth trying it s better to buy a laptop that would support the HDMI port instead of buy a converter for 200-$300

• Qosmio G20-102 TV TUNER: how to get this to work - what cables are required?

  Hey everybody,

  I just installed vista on my laptop QOSMIO G20-102 (PQG20), I have media library now.
  My laptop came not like MEDIA CENTER EDITION, it came under the home edition of Windows XP (laptop purchased in July 2005).
  I got 3 cables which I have no idea how to use...
  laptop was purchased in Dubai/Emirates and I live in Malta

  These are the cables >
  http://img399.imageshack.us/img399/7189/dsc00780gi6.jpg

  Now for my question (s):
  1 which of these cables do I need? Im just trying to figure out how to get my satellite tv or digital cable to work on my laptop.
  2 antenna adapter (see picture) is not for coaxial cable, what can I do?
  3 I did WINDVR more due to the upgrade of vista, Media Center Gets the job done but I don't know what to do... This guide has confused me even more > http://www.microsoft.com/windowsxp/mediacenter/using/setup/settop.mspx
  I don't have IR control cable, I do not have a remote sensor (but I have some sort of built in the remote sensor on the front of my laptop.

  I'm looking for advice as for example buy this, get rid of it, install this etc...
  Please, anything that can help is appreciated!
  If you need information more just ask, I am here ;)

  Yours sincerely
  Ishmael

  Hi ismael,.
  I'll try to help with that, but it's a long way to the road...
  I don't know what Tv system is used to Malta (Pal)?

  The best way to set up your TV's with Media Center 2005 edition.
  Cables:
  Check the back of your cable TV installation box and find the composite or SVHS output. If you have only the composite, you can use the composite cable of the posted image. If your TV decoder has the SVHS, so you should use, to the better image than composite. You must obtain a SVHS cable for this.
  Look for the audio output rca, too. Mix with the composite cable for the audio Qosmio.

  But you must have:
  1 control cable IR, for media center 2005 configuration as well as your TV decoder. It is cable connected to the remote sensor (see fact sheet on the back).

  2 sensor for your remote control and configure it with the remote control of your TV decoder. In this way, you can control the receiver cable channels, using the remote control for your Qosmio G20 media center edition.
  Recovery: you can change the channels on your TV decoder using the qosmio remote control.

  3. remote control for you media Center 2005, one that came with your Qosmio g20.

  Open the TV on Media Center 2005 configuration and follow all the steps required for installation.
  You must follow the guide, as is explained in the image you posted:
  http://www.Microsoft.com/windowsxp/mediacenter/using/Setup/SetTop.mspx

  If you have all these cables, you can use the Qosmio player to watch TV. It is not tied to windows OS.
  Here, simply connect the coaxial cable and let the Qosmio player search for available channels in your area. Qosmio player has the opportunity to set the colour TV system in any part of the world. all NTSC regions in all PAL regions.
  If you have the remote control for your Qosmio, TV keys will work directly with the Qosmio remote sensor on board, without needing the external sensor of Microsoft.

  I hope this helps you
  Francisco

• How to get the .rbf and .through files?

  Hello I am currently working on the project, which provides for automatic deployment and launch programs everchanging.

  Ev3 are scattered in different schools. I wrote a simple script that can download a file and then send it to ev3 via wifi.

  But I'm currently stuck on how to get .rbf and Labview .through files.
  I know that I can deploy .vi using the target to ev3 and then upload these files to the PC, but I can't add script.
  Is it possible to compile .vi to the file?

  Sorry, try this

• Can I get a "schedule" of labview makes when it runs the program?

  Can I get a "schedule" of labview makes when it runs the program? that is how long it spends making each sub vi, and what order it's them.

  See you soon

  The execution Trace Tool kit is an add-on. If you do not your package of discs... maybe try a demo version?

  Spy OR get loaded with BT (or one of these things).

  Start > programs > National instruments > NI Spy?

  Ben

• How to change the time timestamp labview at the UTC time

  Hello

  I have table of database in UTC time field.i select and insert data in the database table based on labview timestamp controll.

  example:

  Table:

  S:no U.name PWD Epoch (UTC 1970)

  1 1450422341 123 kumar

  mock 2 786 1450421623

  the era of labview is difference from UTC time. so ADD this second 2082844800 at the time of labview that it will work for selection quary but time insert is not a job.

  Here's how to convert a timestamp of LabVIEW to a timestamp of Excel (OLE).

  

  Red the explainiation down and I'm sure you can figure out how to change it to get the party time you need.

• Application Builder-how to get rid of the savings going to project after generation?

  Hello

  I'm using LabView to project continuous integration with Jenkins. I have a vi that runs test cases is build of the project, then bed information on the results of Jenkins.

  After a success, there is a warning that I have unsaved changes in the project that I wanted to build. This message is to close labview and jenkins of the display of the results

  Here I found information about this warning at the first "Note".

  http://FTP.datx.com/public/DataAcq/LV-link/LVLinkWebHelp/Building_and_Distributing_an_Application.ht...

  How to get rid of this warning, or save changes automatically, so that I don't have to click 'Save' after each generation?

  Thank you

  Karol

  First of all, you don't want to get rid of this warning. It is this backup which makes the work number version auto-incrémentées. LV has to save the new version number in the project.

  Yes, you can make a backup. Somewhere, to do the code LV, who runs a program generation. At the end of this process, you need to save the project. There is a method to do project.

  I wrote a small program for me to open a project, perform the selected builds and copy the installer resulting in a USB key.

  Mike...