How to get into BIOS and boot on Satellite C50-A-1GZ menu?

Similar Questions

• How to enter the bios and virtualization of hardware (or software) turn off? On Hp 3400 mt series

  I have HP 3400 MT SERIES

  motherboard: Foxconn 2ABF 1.20
  Version of the BIOS FRIEND brand: 7.14

  How to get into bios and disable (hardware or software (I don't know)) virtualization that I have to open mac osx 10.7 in vmware

  Enter the BIOS and look in the Security section, as shown in the image below. If that's what you see, then activate the virtualization technology and it's done. You will be able to use Sun's VirtualBox and other virtualization programs later

  

  Best regards

  ERICO

• Satellite L70 - A - 13P - cannot get into BIOS after the BIOS setting password?

  HI, Satellite L70 - A - 13P

  I set up a password user and supervisor. Works very well. However, I can't get into bios. If I press F2 as usual, I have the box "enter password" (the same as for normal startup). After you type the password for the supervisor, computer continues initializing and do not get into the bios!

  I keep the key pressed F2 but nothing works.
  I also tried ESC, F1, INS, F12, 0.

  Help.

  User and supervisor password the same?
  Have you been able to get into the BIOS in the past?

  Proceed to a complete stop and restart the laptop. Then try with F2 or F12. When you will be asked to set supervisor password and I hope that you will be able to enter the BIOS settings.

• How to access the BIOS and disable hype-threading on xp

  How to access the BIOS and disable hype-threading on xp

  THX

  During the initial boot, you should see a brief message posted to press a specific key (usually the delete key) to access the BIOS. If there is an option to disable Hyper-Threading, you will need to find it.  You can also see if there is a guide for your motherboard and the BIOS options.

  Any reason, you need to disable?

  J W Stuart: http://www.pagestart.com

• Step by step how to set up bios to boot XP Lenovo 3000 K series?

  Hi all

  IM has been trying for several days to install xp on my PC, but it does not work. Ive also tried to install recovery DVD that Ive got with the PC but each time it seems same message that Ive had a problem with my HDD and the fourth to solve the problem in the BIOS. I tried Hurd, but no luck. I know that I've to change the AHCI RAID but I can't find this option in the BIOS.

  I have to please anyone can give a step by step how to set up bios to boot XP on Lenovo 3000 K Series.

  Thanks in advance.

  Hello

  Ive solved the problem by removing the battery for a few minutes clear the BIOS.

• Someone has created a website for my business before I joined 5 weeks ago. We do not have a lot of information about how they did it! I know it's good Muse - any ideas on how to get into the back-office to do this editing?

  Someone has created a website for my business before I joined 5 weeks ago. We do not have a lot of information about how they did it! I know it's good Muse - any ideas on how to get into the back-office to do this editing?

  You would need to Muse and the original file of Muse. There is no 'back-office' on Muse like WordPress or Joomla sites! If that's what you're looking for.

• Hi, I have a question, I would like to ask how to get into Photoshop CC 2014 English language? Thank you, Dana

  Hi, I have a question, I would like to ask how to get into Photoshop CC 2014 English language? Thank you, Dana

  Preferences > Interface > Select English Language User Interface and restart

  If this option is not there, you need to install the English language of the Cloud Desktop App designer pack.

  Photoshop CC / bad INTERFACE language / how to change? Adobe Community will give you examples of screenshot.

• How to get the second and third weekend of every month over a period of time?

  Hello

  No idea how to get the second and third weekend of every month on a given period without use of CLAUSE?

  Thanks in advance.

  Try it below,

  SELECT CASE WHEN TO_CHAR (ADD_MONTHS (TRUNC(startdate,'MM'),(LEVEL-1)), 'DY') = 'SAT '.

  THEN ADD_MONTHS (TRUNC(startdate,'MM'),(LEVEL-1)) + 1

  WHERE TO_CHAR (ADD_MONTHS (TRUNC(startdate,'MM'),(LEVEL-1)), 'DY') = 'Sun '.

  THEN ADD_MONTHS (TRUNC(startdate,'MM'),(LEVEL-1)) + 6

  Of OTHER NEXT_DAY (ADD_MONTHS (TRUNC(startdate,'MM'),(LEVEL-1)), "SAT") + 1

  END as second_weekendday,

  BOX WHEN TO_CHAR (ADD_MONTHS (TRUNC(startdate,'MM'),(LEVEL-1)), 'DY') = 'SAT '.

  THEN ADD_MONTHS (TRUNC(startdate,'MM'),(LEVEL-1)) + 7

  WHERE TO_CHAR (ADD_MONTHS (TRUNC(startdate,'MM'),(LEVEL-1)), 'DY') = 'Sun '.

  THEN ADD_MONTHS (TRUNC(startdate,'MM'),(LEVEL-1)) + 7

  Of OTHER NEXT_DAY (ADD_MONTHS (TRUNC(startdate,'MM'),(LEVEL-1)), "SAT") + 7

  END AS third_weekendday

  FROM (SELECT SYSDATE startdate,

  SYSDATE + 300 enddate

  THE DOUBLE)

  CONNECT BY LEVEL<=>

• How to get the width and height of Flex Mobile view?

  Hello

  The following instructions can get the width and height of the current Flex app:

  var request: UIComponent = FlexGlobals.topLevelApplication as UIComponent;

  trace (application. Width);

  trace (application. Height);

  But I don't know how to get the width and height of mobile display Flex current (i.e. the content size excludes bar action and the Navigation bar). Why the "this.width" always returns 0?

  Thank you!

  Looks like you're running in this bug: https://bugs.adobe.com/jira/browse/SDK-30070

• How to enter the BIOS on the new Satellite L300?

  Hello

  Just bought today... I can't wait to install other operating systems, but can not understand how to enter the BIOS to boot from the CD.
  Any help appreciated

  Daka

  When you start your laptop (Toshiba homescreen) Please check the white bar at the bottom and read what is written there.

• I am trying to build a DVD menu, but whenever I click on the button "Toggle the display of the menu" options I get no picture and I am unable to create a menu. Can someone help me with this?

  I am trying to build a DVD menu, but whenever I click on the button "Toggle the display of the menu" options I get no picture and I am unable to create a menu. Can someone help me with this?

  You need to install the library separately:

  http://helpx.Adobe.com/Encore/using/download-library-content.html

• How can you get into BIOS on a Satellite 320 CD.

  Hi my name is steve, I was wondering how get you into the BIOS on a satellite 320 CD. Because it's my first format at the top of a tower. Done a lot on the office laptops just never. As some fool tried to do before me and distroyed it. Now the only thing that happens is when the toshiba logo disappears this message appears, INVALID SYSTEM DISK, REPLACE THE DISK, THEN press ANY KEY. It allows to run Windows 98 and it worked great for what age there. Hoping to put XP on it, but its only got a small hard drive (4099 mb). So will hand 98 on it until I get a bigger hard drive. Only need to teach my daughter how to respect a laptop. I want to get into the BIOS for the format. No instructions on how to enter the BIOS would be great, because I'm good from there. Thanks in advance for your help.

  Hello

  You suggested that you want to enter the BIOS to format the HARD drive. Very strange.
  However, if you want to boot from the CD so you can also use the C button immediately after the power button.
  The laptop should boot from the CD of Win98. The installation procedure contains a HARD drive format option.

• How do I get into Bios on Toshiba Satellite L505-13F

  How to enter the Bios on Toshiba Satellite L505-13th?

  Have you tried pressing F2?

• Satellite L840/020 - can't get into BIOS after enabling the quick start option

  I have a laptop Toshiba L840/020 (PSK8LA-020007). I recently installed a 330 Series SSD and Windows 8 Pro RTM 6.2.9200 MSDNAA on this Intel and enabled the fast boot option in the BIOS (boot speed > fast).

  Now I can't get into the BIOS, no matter what I do. I tried pressing the power button / stop while pressing F2 (as suggested by a few other forums), upward on default that I tried all F and Esc keys, but nothing does. I also tried repeatedly pressing F2 during startup, plugged a USB external and supported on F2 keyboard on it, but no matter what I can't get into the BIOS.

  When I go to the Toshiba support download section > 8 64 bit Windows, I see also a BIOS update for my laptop, but when I try to install I get the following error:

  ---------------------------
  Error
  ---------------------------
  Flash process will end!
  Current platform have secure start capability, it must provide the location of storage NV by interface IHISI.
  Please contact BIOS OEM Engineer to add the feature.
  Without this IHISI interface, variables to authenticate will be modified or erased by flash process.
  If you understand the risk and want to keep flashing.
  You can add the following parameter in platform.ini to ignore the error.
  [EngineeringErrorDisable]
  SkipSecureBootProtectionCheck = 1
  ---------------------------
  Ok
  ---------------------------

  I'm not changing platform.ini and flash, without first asking the help of the community.

  Please let me know how to enter the BIOS. Thank you.

  null

  Hello

  First try INS then F2 key.

  Then you should be able to access the BIOS, I recommend disabling the QuickStart in the BIOS if you can successfully enter the BIOS.

  With regard to the update of the BIOS.
  I checked the page of the Toshiba driver to THE and it seems that the BIOS v6.20 is even similar to Win 7.
  I think that the BIOS update must be done running the system pre-installed Toshiba since Win 8 is not officially on the market, and to my knowledge, there are some big restrictions updated BIOS running Win 8

• How to get a clean and green Win8 facility

  Hey everybody.   Just bought a laptop Inspiron 15, 7000 series, computer laptop i7. It of a bit muddy, so please be gentle :)   I bought the full Version from Newegg 8.1 window to use on an old MacBook Pro.  Did not work very well with Bootcamp/VM.  So I got the Dell.

  1. I really HATE all the bloatware and want to do a new installation.

  2. I want the new installation on a disk SSD 256 newly purchased.  The swap of the disks was pretty easy.

  3. I have NOT activated Windows 8 on the original Dell drive.

  4. I enabled Windows 8 on the key that I received from Newegg on my MBP, but as wiped out the drive and sold the old MBP.

  5. I created a bootable USB drive to attempt to use the license that I purchased from Newegg.  If I can still.

  6 can't get Dell to read the USB key, even though I went into the BIOS to change the boot priority but I could have missed a setting?

  What are my best options / and how to get a facility clean and green on the new SSD 256 Win8?  I can live with the loss of the license from Newegg provided if I have to.  I just want a clean and green on the SSD.

  Thank you!!!

  Update: thank you!  Everything seemed to work very well.  It turns out that there are corrutped files on the flash bootable drive. Such things usually happen to me.  Another fact.  Installation went painless and Windows has accepted the key.  Now I have clean and green on the SSD.  FAST!