How to get the border around the text

Hello

Attached is a logo that has a border around the text that im trying to duplicate I tried dropshadows and with the help of a stroke, but the two did not work if someone could tell me how this is done I would greatly appreciate it's for a logo design btw im. Just trying to learn new tricks in illustrator.

Thank youCutepen.png

Appearance Panel, add a line (at the bottom of the appearance Panel). Move the line under the fill in it entering on the right side of the Panel, drag down filling. Make the race heavy enough to achieve the desired effect.

Mike

Tags: Illustrator

Similar Questions

  • How to get the text have the same effect as the video?

    Hello

    For the first time post here, but I wonder how to get the text of the titles have the same effect as the video behind her.

    For my video, I use 'bad tv' and other effects such as Gaussian that obviously changes the appearance of video, creating the look of VHS. However, I then inserted text via the title, but it normally appears. How can I make this text have the same effects as the video behind it?

    A friend told me I might need to add text to the video first, then do the effects, I have not tried, but wonder if there is an easier way, as this would require me to restart.

    EDIT: That's what I'm looking for. https://youtu.be/7_2PHQI89dI?t=24s The text has the same effect as the video.

    Thank you

    One way is to create a clip made up based on the title and the original clip. Then apply the effect.

    Another way is to use an adjustment layer.

    Good luck.

    Russ

  • How to get the text of a SystemPrompt (Cascades)

    Hello

    I've been struggling with this for a few hours now. I followed the example of "dialogues" on github, so I have successfully created a SystemPrompt (the dialog box that allows the user to enter text and accept / reject). Curiously, in this example there is no use of user text input. Do you know how to get the text in my QML? Here you have an example of code that I use:

    My QML:

    // Default empty project template
    import bb.cascades 1.0
    import bb.system 1.0
    
    // creates one page with a label
    NavigationPane {
        id: navigationPane
        Page {
            attachedObjects: [
                SystemPrompt {
                    id: prompt
                    title: qsTr("Enter a text for the label")
                    modality: SystemUiModality.Application
                    inputField.inputMode: SystemUiInputMode.Default
                    inputField.emptyText: "Label text..."
                    confirmButton.label: qsTr("Ok")
                    confirmButton.enabled: true
                    cancelButton.label: qsTr("Cancel")
                    cancelButton.enabled: true
                    onFinished: {
                        if (result == SystemUiResult.ConfirmButtonSelection) {
                            lab1.text = ????? // Here is where I don't know what to do
                        }
                    }
                }
            ]
    
            Container {
                layout: StackLayout {}
    
                Label {
                            id: lab1              text: "Label text"
                    objectName: "lab1"
                    textStyle.base: SystemDefaults.TextStyles.TitleText
                    horizontalAlignment: HorizontalAlignment.Center
                }
    
                Button {
                    text: "Update label"
                    horizontalAlignment: HorizontalAlignment.Center
                    topMargin: 150.0
                    onClicked: {
                        //_appUi.editLabel();
                        prompt.show();
                    }
                }
            }
        }
    }
    

    Be sure to add this in your .cpp file or all of app:

    #include 
    #include 
    #include 
    #include 
    #include 
    #include 
    #include 
    #include 
    #include 
    #include 
    

    and don't forget to include them in your app .cpp file (probably not all are needed, but just in case I leave here for the moment):

    qmlRegisterType("bb.system", 1, 0, "SystemUiButton");
        qmlRegisterType("bb.system", 1, 0, "SystemUiInputField");
        qmlRegisterType("bb.system", 1, 0, "SystemToast");
        qmlRegisterType("bb.system", 1, 0, "SystemPrompt");
        qmlRegisterType("bb.system", 1, 0, "SystemCredentialsPrompt");
        qmlRegisterType("bb.system", 1, 0, "SystemDialog");
        qmlRegisterUncreatableType("bb.system", 1, 0, "SystemUiError", "");
        qmlRegisterUncreatableType("bb.system", 1, 0, "SystemUiResult", "");
        qmlRegisterUncreatableType("bb.system", 1, 0, "SystemUiPosition", "");
        qmlRegisterUncreatableType("bb.system", 1, 0, "SystemUiInputMode", "");
        qmlRegisterUncreatableType("bb.system", 1, 0, "SystemUiModality", "");
        qRegisterMetaType("bb::system::SystemUiResult::Type");
    

    Thank you very much

    If you look very carefully by the docs, you'll trip over https://developer.blackberry.com/cascades/reference/bb__system__systemprompt.html#inputfieldtextentr...

    So, replace your? with inputFieldTextEntry() and you will get the text you need.

  • How to get the text block, given anchor (~ a)

    I need to dynamically position anchored with anchor text blocks (but the relative position will be different for each anchor). If I grep ~ i can get the anchor marker - how to get the text block once I got this marker?

    Thank you

    The marker "anchor" is a character of "simple".

    So you can do the following if you have identified the character (and in this example selected it):

    //Start with an "Anchor Marker" selected:
    var myCharacter = app.selection[0];
    
    if (myCharacter.texts[0].textFrames.length == 1){
    
    var myAnchoredTextFrame = myCharacter.texts[0].textFrames[0];
        //do something with the anchored text frame:
        myAnchoredTextFrame.fillColor = "Yellow";
    
        };
    

    You can set the myCharacter variable differently, if you know the index of the character according to his history of parent.

    Or if you have found the character as part of a search GREP or TEXT by ExtendScript (JavaScript).

    Uwe

  • How to get the text of TextEditBox on Panel

    Hi all

    I would ask you, what should I use when I want to get the text of TextEditBox. I have the observer, who listens to the chages (when the user hits enter, the Update method of the observer is called). The only thing I don't know is how to get the text, which was placed in the text edit box. I know that this observer of the dialog box, GetTextControlData method, but I sign...

    THX

    Hi Ondrej

    You can get the text using the ITextControlData interface. Like this:

    InterfacePtr iCtrlView (this, UseDefaultIID());
    if(!iCtrlView) break; put some say message
    InterfacePtr iTextData (iCtrlView, UseDefaultIID());
    if(!iTextData) break; put some say message
    PMString theString = iTextData-> GetString()

    Concerning

    Bartek

  • How to get the text formatting in the tables

    Dear experts and aid

    For my project, I import an RTF file and then read the data into 3 tables. It works fine when just using the contents of the string of paragraphs. However, the final script should be able to read and to replace the text formatted...
    Why use intermediate tables? Because otherwise I need to swap between two fm-documents (and you can be a part of the book).

    The imported file starts with a certain number of lines separated into two parts by a TAB ("designates a TAB in \x08 FM)
    [[Garneau, 1990 #12]]    »   [9]
    The good article can also be locally as text, e.g. [9]
    Then follow the same (or smaller) number of paragraphs with text formatted like this:
    [9]"D. Garneau, ed., National Language Support Reference Manual (national language Information Design Guide. Toronto, CDN: IBM National Language technical Centre, 1990.

    Is it possible to replace in the body of the function below the next song

      while(pgf.ObjectValid()) {
        pgfText = GetText (pgf, newDoc);
        gaBibliography.push(pgfText);
        pgf = pgf.NextPgfInFlow;
      }
    

    with this

      while(pgf.ObjectValid()) { 
        gaBibliography.push(pgf);
        pgf = pgf.NextPgfInFlow;
      }
    

    Do I need a special statement of the gaBibliography range?
    And how to get the right part of the lines as formatted intro thingy in table gaFmtCitsFmt ?

    Currently, I read in the tables as "strings" (function GetText not shown):

    var gaFmtCitsRaw  = [];                           // left column in processed RTF
    var gaFmtCitsFmt  = [];                           // right column in processed RTF
    var gaBibliography= [];                           // bibliography lines from processed RTF
    // filename is something like E:\_DDDprojects\FM+EN-escript\FM-testfiles\BibFM-collected-IEEE.rtf 
    
    function ReadFileRTF (fileName) {
      var nCits=0, nBib = 0, openParams, openReturnParams, newDoc, pgf, pgfText ;
      var TAB = String.fromCharCode(8);               // FM has wrong ASCI for TAB
      var parts = [];
      
      openParams = GetOpenDefaultParams();
      openReturnParams =  new PropVals();  
      newDoc = Open (fileName, openParams, openReturnParams);  
      pgf = newDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;  // get first pgf in flow
    
    // --- read the temp/formatted citations  
      while(pgf.ObjectValid()) {
        pgfText = GetText (pgf, newDoc);
        if (pgfText.substring (0,2) == "[[") {        // citation lines start with [[
          parts = pgfText.split(TAB);                 // get the two parts of the line
          gaFmtCitsRaw.push (parts[0]);               // Push the result onto the global array
          gaFmtCitsFmt.push (parts[1]);
          pgf = pgf.NextPgfInFlow;
        } else { break }
      }
    
    // --- read the bibliography
      while(pgf.ObjectValid()) {                      // until end of doc
        pgfText = GetText (pgf, newDoc);
        gaBibliography.push(pgfText);
        pgf = pgf.NextPgfInFlow;
      }
      newDoc.Close (Constants.FF_CLOSE_MODIFIED);
    } // --- end ReadFileRTF
    

    The following questions will then be how to change the script of FindAndReplace of Ian Proudfoot for managing text formatted as replacement. I will need to use the copy and paste IMHO...

    Klaus, okay, before pasting, you must assign the TextSelection object at your insertion point.

    // Add a new paragraph after the current paragraph.
    var newPgf = oDoc.NewSeriesPgf (lastPgf);
    var textRange = new TextRange (new TextLoc (newPgf, 0), new TextLoc (newPgf, 0));
    
    oDoc.TextSelection = textRange;
    oDoc.Paste ();
    

    -Rick

  • create a children's book? How to get the text over an image?

    I have 13 Adobe elements. Try to get the text on an image. An illustrated image. How can I do this?

    Open the image in Expert mode

    Download the text out of the tool box tool, select the font, the pt size, color and type text.

    Use the move tool to position the text. Note that the text will be on a separate layer, and you must click on this layer to make it active.

  • How to get the text enum I32 an uncontrollable (I / config terminal p side assets in the DAQmx screws)

    Hello

    I use DAQmx screw create clock.vi channel.vi and sample, they have entered (Terminal configuration of entry) and (active) both are I32 and have enum watch drop-down options. I want to use these text values to put in my excel file, but they give numerical codes associated with respective option. is it possible to get the text as it is.

    It is not an enum but I32 resembling enum...

    Help, please...

    Thank you

    In fact the active side is a control of the ring. Just a click and create a property for text.text ring node. This will give you the selected channel when the property node runs.

    I hope this helps.

  • How to get the text in a dynamic text field?

    Hello

    I would like to get the text in a text field I have on stage and put it into a string. I do this because I don't don't want to use the table to store each letter I click. Is this possible?

    Concerning

    you don't know.  You can use the text property of your textfield object and store that value in a variable.

    You can use a click on a button to trigger this code or change event of the textfield or any number of other triggers.

  • How to get the text that is centered vertically in the box of Li

    I update the website of our company in another area of the system is why you will see a tf in the web address, that I am about to give.

    http://www.essentialfinance.NET/TF/products/reconciling/accruals_manager.asp

    Now, the problem I have is that the options in the boxes are aligned at the top.

    I had a problem understand quite how to get these boxes to work so that they show when hovering etc, but eventually came through a tutorial that appears to create a class of nav hanging to the ul.

    I tried to change all ul.nav, li ul.nav, ul.nav one is regarding the text vertical alignment centered but without success.

    The css file is here:

    http://www.essentialfinance.NET/TF/main.CSS

    I put this link because someone may be able to choose my faults.

    I just put a link to # (not going anywhere) to get the < a > code initialized...

    In fact - don't worry about the color scheme... it's only temporary to test the feature.

    And I would not wander anywhere else on the site - it's a shambles that is why I am interested in it.

    Can someone please advise? Thank you very much in advance for any comments.

    Terry

    For the ul.nav one rule, delete the height attribute.  Then add the padding attribute in this same area.  The padding will give you the height of the button you are looking for without setting the height, which is the typical way to do it.  About 10 to 15px padding should do the trick.

  • How to get the text of a constant ring?

    If I have a constant of the ring, is it possible to get the context of this constant ring?

    For example, I would take the capacity of path to determine if connect or not.

    If the path is not available, I would handle the error, put the number of the ring for the code and text to the source.

    It seems that it is difficult to know my motivation, any suggestions will be appreciated

    For a constant ring directly you can not. You can create a control for this and the 'Strings' property allows you to get an item in the string format name. Another way is by replacing the constant of the ring with an Enum constant and using the Format to a string Primitive.

  • How to get the text to the next line of the Label

    Hello

    I am trying to write a code where when I press Enter the text in the text box appears on the next line of the label. However, each new text is get printed on the same line...

    Here is my code:

    java.applet import. *;

    import java.awt.*. *;

    java.awt.event import. *;

    public class ChatBox extends implements ActionListener Applet

    {

    TextField firstNum, secondNum, resultNum;

    Label label1;

    String str1 = "start chat".

    public ChatBox()

    {

    setLayout (new GridLayout (3, 2, 10, 15));

    setBackground (Color.cyan);

    String message;

    message = "start typing and see the magic."

    setLayout (new GridLayout (2,1,10,120)); 10, 15));

    setBackground (Color.cyan);

    firstNum = new TextField (5);

    firstNum.addActionListener (this);

    Label1 = new Label (firstNum.getText ());

    Add (Label1);

    Add (firstNum);

    }

    public void actionPerformed (ActionEvent e)

    {

    String line = System.getProperty ("line.separator");

    String message = "start typing and see the magic."

    str1 = str1 + newline + firstNum.getText ();

    firstNum.setText("");

    message = message + str1;

    Label1.SetText (str1);

    }

    }

    Is it not possible?
    Guide of nicely with another way to do it.

  • How to get the text opacity?

    I'm able to get the opacity of the object, but I can't find the way to do the same for the opacity of the text, anyone can guide me?

    Thank you

    With my debugging plugin that I haven't covered too much transparency, but kXPContentBlendingOpacityAttrBoss would be a good guess. When I change the transparency of the UI, the object kDocBoss is notified with given IID_IINVALSHAPE a kGfxApplyMultAttributesCmdBoss whose IID_ICLASSIDLISTDATA command contains this ID. This triggers for example control upstream.

    Added the: the attribute can then be located on IID_IGRAPHICSTYLE_OVERRIDES of the kSplineItemBoss.

    Dirk

  • How to get the text of an onclick / "open the browser window" behavior to look like a link

    If I put this behavior to a specific word (on an < a > tag without the "href"), the link is not underlined, and the mouse does not turn into a pointer. If I put this behavior to a full < a > tag with the "href ="..." "" then the browser opens a new window (depending on the behavior) and a new page in the original window (according to the directives of the href = "..." »). How can I get the link to appear as a link (underlined and changes the mouse pointer) without having to assign a href = "..." "to the < a > tag?

    If I put this behavior to a specific word (on a label of without the 'href'), the link is not underlined, and the mouse does not turn into a pointer. If I put this behavior in a tag complete with the "href ="..." "" then the browser opens a new window (depending on the behavior) and a new page in the original window (according to the directives of the href = "..." »). How can I get the link to appear as a link (underlined and changes the mouse pointer) without having to assign a href = "..." "to the tag?

    For an affordable solution, see

    http://apptools.com/rants/popups.php

  • How to get the text on a path backwards?

    Hi all!

    I am a newbie to indesign, so I really hope that I won't bore you with my stupid questions - but...

    I created a circle with the text that follows the path all around. Only thing, that's the word at the bottom of the circle must be the 'right' way to the top and does not follow the rest of the text by worms inside. In this way, it will be easier to read at a glance.

    Is there a way I can return just a portion of the text, so even the slight curvature of the circle, it is the reverse for the rest of the text?

    Thanking you in advance if you can help me!

    EM

    You must make two superimposed channels and screw the text between them. You should see three handles for the text. Ones on the end have entry and exit ports as a regular text block and indicate the beginning and the end where the text will be placed. There is a third Center which can be harder to spot. It looks like an inverted T, and you can grab and drag it to the other side of the path to reverse.

  • How to get the text of the materialized view?

    Hello

    How to get test (query) of materialized view?

    Thank you

    With
    the value of 10000 long
    set pages 0
    DBMS_METADATA. GET_DDL ('MATERIALIZED_VIEW', 'MV_EMP', 'SCOTT');

    Of course replace view_name and owner.

Maybe you are looking for