How to get the crop tool to work faster (is slow)

Similar Questions

• How to get the crop tool to crop the image in the Photoshop CC software freezes?

  Recently installed photoshop CC 2015 and when using the crop tool after pressing the check box the software takes forever and never crops the image. How can I fix it?

  OK what I did was select the crop tool and then right clicking on the icon in the upper left corner and the reset tool.

  That solved the problem.  Thanks for your help. Appreciate it.

• The blur tool.  I can not get the blur tool to work for me.

  The blur tool.  I used Photoshop for photo editing until 2 years ago.  I just started to use Photoshop again, and I can't get the blur tool to work for me.  I just does not affect the pixels at all.  I think I'm following the correct process for click on the blur tool and then configure the brush to do my procedure of blur.  Help, please.

  Hi Robert,.

  Please do not forget that you work directly on the layer on which is the image you want to blur. Where you work on an empty layer, make sure that your auto to check the ' sample all layers ' (mine is unchecked) property in the top bar. Also, as has been suggested previously, check if the blending mode is set to normal.

  If the problem persists, please let us know,

  Kind regards
  Martin Benes

• Satellite A210-14 t: how to get the Fn keys to work under XP?

  Anyone has a solution how can I get the 'Fn' - key to work under Windows XP?

  Will there be a version of the Windows XP drivers in the near future?

  Thank you

  I imagine that you will not be able to get the keys FN works on XP because the XP drivers are not available at this time.
  Seems that you have to wait and hope ;)

• How to use the crop tool without losing pixels?

  5616 x 3774 / res 72, is what CS5 says my Canon 5 d 2 large jpeg is off camera.

  Can I use the harvest too to make a picture of 20 "x 24" and keep all or most of these pixels? "

  Leave the area blank resolution?

  The lab I send the file to print, said they want 300 res files (just to complicate the thing a little more)

  Thank you!

  To tell the truth I do not use the crop tool. I use the selection Rectangle, crop image tool and the size of the image.  If you use the crop tool and fill a field of resolution in the crop tool crop tool makes all three operations including the harvest to the resolution that you have entered the resampling. Adobe also gave the crop tool implemented in CS6 that a lot in my arms. Don't mind at all.

  IMO if you use harvest its best tool to fill the field of the resolution. In this way the harvest will not resample.  You can enter height 24 20 width or height width 6 5 in fact the same proportions as it is 12:10

  After you do the crop you can use the size of the Image. In the dialog box uncheck resample set the width for printing on 24. You'll see Photoshop set a height 20 and set the resolution to a certain value. If the fall of DPI value below what you want check resample together in the desired resolution and interpolation method to use and then click OK.

• How can I get the highlighting tool to work correctly?

  When I click on the highlight tool, I get the text selection indicator to highlight, but I can't go any further.  The text is not growing.  What I am doing wrong? >

  The document must be an image.  I can't select words, just a box.  I checked some documents that I knew were test and the tool works properlywith them.  Thanks for responding.

  Barry

• The crop tool stopped working properly.  Everything is reduced to 17.6 kb.  Is there any solution for this?

  All of a sudden the crop on 12 items Photo tool stops working correctly.  After selecting and cropping, the photo gets reduced to 17.6 kb, goes to the bar higher and cannot be reopened at the bar.  Y at - it a fix for this problem?

  glousta wrote:

  go to the bar higher and cannot be reopened at the bar.

  I don't know what that means. In any case reset the default cropping tool. To do this, on the options of the crop on the right tool bar look for a box with lines inside. Click and reset. Who can fix it.

• Satellite P10 - how to get the Netgear router to work?

  Morning

  Can someone tell me how to get my laptop Satellite P10 to work out of my router Netgear wireless zone that goes with my virgin package please?

  I work in the area of modem at the moment... or the P10 wi - fi like my acer laptop which is everything mounted in.
  Be more grateful if anyone here can work this 1 out for me the switch on the left side of the laptop is slipped on.

  Thanks... take care of Dennis

  Hi mate

  Have you read the manual of the router?
  Do this if you didn't check the manual and the instructions how to set up the router!

  Regarding the availability of Sat P10 and WLan.
  As far as I know the other Satellite P10 support different hardware specifications, which means that not all P10 have been equipped with the WLan card.
  You should check your device manager if the wireless network adapter is installed.
  If the laptop doesn't support wireless network card then I would recommend using a USB WiFi key which is the simplest solution to prepare the notebook WLan.

  Welcome them

• How to get the software HP Coolsense works again after the clean install (win7)?

  I recently purchased a DV7 6014TX and upgraded to an SSD and a clean install of the retail version of windows 7 64-bit. I want to know how do HP Coolsense works again? I saved the folder drivers of my original hard drive SW and I so all people. SP52814, I downloaded the installer coolsense, but it doesn't seem to work. Any input on this would be highly appreciated.

  Coolsense also requires HP Support Assistant see links below

  HP Notebook PC - on CoolSense technology

  Download

  HP Support Assistant

• How to get the latest tools of command line for Mountain Lion

  Hello community.

  I have a MacBook Pro withSoftware OS X 10.8.5 (12F2560)
  It is according with Mountain Lion:

  • https://es.Wikipedia.org/wiki/OS_X#versi.C3.B3n_10.8:_.C2.ABMountain_Lion.C2.BB

  I use Homebrew, he requested updated command line tools

  Now I'm on https://developer.apple.com/downloads/ and looking at Command Line Tools , the latest update for my OS version is April 2014 (see picture)

  

  So I'm not able to do a new update. Given that my OS is old.

  I just installed Xcode by https://developer.apple.com/downloads . And only used or needed for Homebrew.

  What can I do to get a new update?

  Thank you.

  Upgrade the operating system if you want to have access to latest updates.

  Make sure your computer is compatible with Lion mountain, Mavericks, Yosemite, El Capitan.

  To check the model number and hold the option/Alt hold, go to the Apple menu and select system information.

  MacBook Pro (Mid/Late 2007 or newer) model number 3.1 or later version

  Your Mac needs:

  Installation of OS X 10.6.8 or OS X Lion

  2 GB or more of memory (more is better - minimum 4 GB seems to be the consensus)

  8 GB or more of available space

  Check to make sure that your applications are compatible. PowerPC applications are no longer supported after 10.6.

  Application compatibility

  (2) application compatibility

  Information on the compatibility of 10.11 El Capitan

  Make a backup before installing, preferable 2 backups on 2 different disks.

• does anyone know how to get the webcam doesn't work on a samsung sv510

  I can't find the webcam in the programs. I can't make it work, does anyone know how? Help, please

  Hello, Damienmelarkey,

  -Come on in and START then all PROGRAMS, you should see a built in CyberLink YouCam, click on this program.
  -Follow the instructions to register, it's super quick and easy, all you have to do is to register your name and email address.
  -Follow through with the directions from there and it should be operational.

  Locate the manuals, drivers and support forum Samsung

  http://www.Samsung.com/us/support/

• How to get the two pagenumbers to work on a single page

  You know the solution to put in page numbers, if you want to both on a single page?

  For example: on the left of a spread page I put in: 12-13 (pagenr 12 works, but nr 13 becomes 12 also)

  I don't want a pagenr. on page 13

  Nancy

  Anne-Marie Concepcion's InDesign Secret written this technique.

  http://InDesignSecrets.com/PreviousNext-page-number-on-same-page.php

  I never did it myself, however.

• How to get the fax option to work without my Windows XP Home Edition CD?

  Original title: FAX/WINDOWS XP

  I need to install Fax components, but Windows XP Home Edition CD-ROM is needed. I have no CD-ROM... Any suggestions? Thank you.

  See the Answer from Jose Ibarra in this thread --> http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/my-windows-components-fax-service-will-not-let-me/1ac9b361-4d1b-4d51-8fb2-f60635f45c6b?msgId=57c5c964-25fc-4955-be94-26e43dd620fd

• The crop tool in any way control the ratio?

  Hi, is it possible to control the rate of the crop tool in CS5 so by dragging a corner to enlarge or reduce the harvest in a fixed ratio as for example the 16:9 format. Otherwise you will be continually adjusting when you make bigger or smaller.

  The crop tool would work for me, if you could do it keep the current resolution and not resample the image

  If you do not set a resolution in culture options tool, the tool does just cropping it.

  It resamples only if you define a specific resolution.

• The crop tool is missing. How can I get that back?

  The crop tool is missing. How can I get that back?

  May the PSE tools are nested together. The crop tool is with the recompose tool. Right-click or click and hold on the recompose tool and you will see: