How to get the 'default gateway' in Windows 7?

Similar Questions

• WRT350N: how to specify the default gateway?

  Hello

  I want to use my wrt350n as dhcp server, but to specify another router as the default gateway.

  I have my wrt350n (192.168.1.254) and another modem/router (192.168.1.1). When a client connects to the wrt350n, it is automatically assigned as the default gateway address of the wrt350 (192.3168.1.1). I would like to change it to refer to the other address 192.168.1.1.

  Thanks for your comments

  Raph

  On the configuration, on the basic settings tab page, there is facility of the Internet and network configuration. Setup of the Internet is for the WAN. Assign The DHCP Auto - Configuration so it will automatically get an IP address from the modem/router.

  On the configuration of the network, local IP address should be 192.168.2.1, subnet mask 255.255.255.0. This is where you enable DHCP. The default gateway should be 0.0.0.0 and that's fine, it assigns the LAN IP of the router.

  Once you have saved it, your router configuration page now is 192.168.2.1 and configuration page of your modem/router is 192.168.1.1.

• How to get the default path of the data of a table space file

  I used below the sql statement to create a table space:

  CREATE A TABLESPACE DATAFILE AAA BBB SIZE 10 M AUTOEXTEND OFF...

  Notice, I do not give a full path instead of a file name, and then ask questions relevant to tables

  get the full path of the data file, assume that it's path below:

  d:\oracle\...\BBB

  So I don't think that there is a default path that oracle can use it to create the data file. My question

  is how to get this default path before creating a table space.

  Thank you very much.

  Hello

  I did similar simulations for you, then it could be seen easily:

  SQL > Show parameter db_create_file_dest

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  db_create_file_dest chain

  SQL > SELECT NAME, VALUE OF V$ PARAMETER

  2 where lower (name) = "db_create_file_dest;

  NAME

  --------------------------------------------------------------------------------

  VALUE

  --------------------------------------------------------------------------------

  db_create_file_dest

  It has the value NULL. Then where my datafile is going?

  SQL > create tablespace TEST datafile 'test01.dbf' size 10 M;

  Created tablespace.

  SQL > select file_name

  2 of dba_data_files

  3 where nom_tablespace = 'TEST ';

  FILE_NAME

  --------------------------------------------------------------------------------

  /U01/app/Oracle/product/12.1.0/Db_1/DBS/Test01.dbf

  When you check the alert logs, it will not show you the location of the data file. It will tell you what exactly you ran.

  ..

  ..

  Completed: drop tablespace test whose content and data files

  create tablespace datafile 'test01.dbf' size 10 M TEST

  Completed: create tablespace TEST datafile 'test01.dbf' size 10 M

  ..

  ..

  You can not SQL user * more? Well, I would say that, when you run the CREATE TABLESPACE command, is where you run the command:

  SQL > select file_name

  2 of dba_data_files

  3 where nom_tablespace = 'TEST ';

  FILE_NAME

  --------------------------------------------------------------------------------

  /U01/app/Oracle/product/12.1.0/Db_1/DBS/Test01.dbf

  
  

  So, you should get the location of your data file. Alternatively, you can run the query in the parameter $ v so that you know your default data file location.

  I hope this helps.

  Thank you.

  Kind regards

  Gaetan

• How to get the default border for TextField?

  In my textfields entry UI, I have them red border if the user enters invalid data. However, I need to reset the border to how it was.

  field.setStyle("-fx-border-color: gray;");
  

  It does not have the default border on windows XP (JavaFX2.2.21)

  The default border is rounded and lightgray.

  I also tried without success

  field.setStyle ("border - fx - color: null;" "");

  - and/or border - color: null; ») ; r color: gray; »

  The style sheet by default (in Java 7), caspian.css, is not actually apply a border to the text field at all but use layered backgrounds of different radii for the border effect.

  The best way to achieve the desired effect is to add and remove a style from the text box class and set the border color in an external style sheet. However, you should be aware of the https://javafx-jira.kenai.com/browse/RT-23085. One solution is to define a border radius default of zero on the text field and a different RADIUS to your "custom" css class Given that the default style sheet does not have a border that won't break anything.

  Example:

  import java.util.regex.Pattern;
  
  import javafx.application.Application;
  import javafx.beans.value.ChangeListener;
  import javafx.beans.value.ObservableValue;
  import javafx.scene.Scene;
  import javafx.scene.control.TextField;
  import javafx.scene.layout.VBox;
  import javafx.stage.Stage;
  
  public class ErrorTextFieldTest extends Application {
  
   @Override
    public void start(Stage primaryStage) {
    final VBox root = new VBox();
    final TextField textField = new TextField();
    root.getChildren().addAll(textField);
  
    final Pattern intPattern = Pattern.compile("-?[1-9]\\d*");
    final String errorCSSClass = "error" ;
    textField.textProperty().addListener(new ChangeListener() {
        @Override
        public void changed(ObservableValue observable,
            String oldValue, String newValue) {
          if (newValue.length()==0 || intPattern.matcher(newValue).matches()) {
            textField.getStyleClass().remove(errorCSSClass);
          } else if (! textField.getStyleClass().contains(errorCSSClass)) {
            textField.getStyleClass().add(errorCSSClass);
          }
          System.out.println(textField.getStyleClass());
        }
      });
  
    Scene scene = new Scene(root, 200, 100);
    scene.getStylesheets().add(getClass().getResource("errorTextField.css").toExternalForm());
    primaryStage.setScene(scene);
    primaryStage.show();
    }
  
    public static void main(String[] args) {
    launch(args);
    }
  }
  

  errorTextField.css:

  @CHARSET "US-ASCII";
  .text-field.error {
   -fx-border-color: red ;
    -fx-border-width: 2px ;
  }
  .text-field {
   -fx-border-width: 0px ;
  }
  

  (Note: there is no space in ".text - field.error".)

• How to show the default gateway

  I have configured an AP to use dhcp, now I want to use the CLI to show what a default gateway, it got picked up.  "Show ip route" is not in his vocabulary.  Does anyone know the correct statement?  Also - for the access point uses the dhcp protocol to pick up the gateway by default, is the absense of explicitly of a declaration 'ip default-gateway' all it takes?

  Thank you

  Mike

  To see AP ip info: -.

  capwap_1131 #show dhcp lease

  Temp IP addr: 10.0.0.12 for peer on Interface: FastEthernet0

  Temp sub network mask: 255.255.255.0

  Server DHCP Lease: 10.0.0.1, State: 3 related to the

  DHCP transaction ID: 157 a

  Location: 86400 seconds, renewal: 43200 seconds, relink: dry 75600

  Temp of addr default gateway: 10.0.0.254

  Next timer triggers after: 05:46:14

  Number of retries: 0 customer-ID: 001c.58dc.xxxx

  Hexadecimal dump ID client: 001C58DCxxxx

  HostName: capwap_1131

  Statically configure the default gateway of the AP on capwap AP ip: -.

  capwap_1131 #debug capwap console cli

  capwap_1131 ap ip default-gateway #capwap

• How to remove the default user in Windows 7

  Some of the original user files became corrupt, in order not to lose all the files, we have created a new user on the same computer.  Now, when we remove the user name and files, original when the computer restarts, we cannot go back... He asks a password with a completely different name we have.  Where and how do I change the system for the new user to the default value and remove the old?  Thank you

  I wrote a longer version of the recommendation that Frederik Long has given you and then deleted because I'm not sure that I fully understand your situation.

  If you can get into Windows, then follow the advice of Frederik long.

  If you are unable to Windows, what do you see when you start the computer?  In other words, don't you see the Welcome screen with one or more of the icons for user accounts?  If there is only one icon and it's a 'completely different' user name this is the old name you deleted?  If not, what is?

  You have a Windows 7 system repair disc or a Windows 7 installation DVD?

• M604: M604 how to change the default gateway

  How can we change just a default gateway on the M604 by using the HP installation CD?

  Thnak you.

  Here is what we were doing this was a quick and easy solution:

  Press the home button on Control Panel.

  Open these menus:

  Administration

  General settings

  Restore factory settings.

  A verification message indicates that supplementing the rest function could cause loss of data. Select "Reset" to complete the process.

  The printer restarts automatically after operation comletes.

  Use the installation CD to run the installation with the correct settings.

• How to get the default BlackBerry smartphone email address?

  Hi all

  How can I get the BlackBerry default email address?

  Thank you

  Sumit

  Thanks Pierre.

  Here's the post that says abt the same question.

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-retrive-the-configured-mail-ID-into-m...

• PDF documents always created in the landscape; print from Word; created from LaTex, everything.  How to get the default portrait?

  How can I get acrobat default XI to portrait mode?

  Hey heritage972972,

  You may need to consult the doc KB for the same link set portrait:

  The horizontal or vertical pages. Acrobat, Reader

  I hope this helps.

  Kind regards

  Ana Maria

• Satellite C850-b71 - how to get the product key of Windows 8?

  Hello

  I have my computer toshiba laptop Satellite C850-b718 and there win 8, but unfortunately the hard drive no longer works.

  IM wondering if there is a way to get the key to the victory 8 from here or any where using the model laptop or something
  If I can use it on the new hard drive.

  Thank you

  Hello

  Toshiba does not any serial key for activation of the system.
  In most cases, computers laptop Toshiba are preinstalled with Windows that is already activated system or activation would be done during the first internet connection.

  I suppose that you did create recovery media that would allow you to recover the laptop to factory condition. This recovery disc (medium) could be created using the preinstalled software Toshiba Recovery Media Creator.
  It s always advisable to create this media because the HARD drive may begin to malfunction and in this case, it is not possible to perform HARD drive recovery procedure.

  In any case, to cut the long story short. the recovery disc can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• How to make the default player for Windows Media Player 11

  I have Windows Media Player 11 installed and I can open and play music with it. However, I can not do Media Player 11 the default player. He keeps back to Media Player classic. I tried the following:

  Panel-> Add Remove programs

  Select Set Program Access and Defaults

  Select the custom button

  Under Choose a default media player, I chose Windows Media Player, and then click OK.

  However if I insert a disc, and then opens it with Media Player Classic.

  If I come back in Set Program Access and Defaults button is to use current media player.

  I have also tried to restart the computer after the Windows Media Player and still does not work.

  Have found the answer. I'll post here for the benefit of others.

  Open Windows Explorer

  Right-click on Audio CD

  Select AutoPlay

  Select the audio CD set with Windows Media Player

  Check box "always do the selected action.

  Click OK

  Now whenever I insert an audio CD, play it with Windows Media Player

• I would like to know how to get the movie library in windows media center to record DVDs

  I don't know how to get movies on my hard drive to find in windows media center

  Hello

  You can check these links:
  Add digital media files to Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-digital-media-files-to-Windows-Media-Center

• How to get the product key of Windows 7 installation CD?

  * Original title: windows installation cd 7

  I have my installation for windows 7 pro sp1 cd and the product key for it is on the computer that has thrown away!

  I want to install it on the new computer, I've had has no BONES on this subject.

  is anyway to get the product key for the drive before you install it?

  Thanks for any help.

  This package looks like it is for the Windows 8/8.1 OEM System Builder License, who can not activate a Windows 7 disc.

• How to change the default player on windows 7?

  I want everything to go on my drive of M (usually either drive D, but my father named M for some reason any). I just got a new game and am running Windows 7 over XP for the first time. I want to download everything I have to by default go straight on my 2 TB drive Mr. drive C is a 30 GB SSD card just big enough for the OS and a few other essential programs (e.g. antivirus, adobe flash player, etc...).  I have been seeing a lot about changing a .dir file but have avoided this rout out for fear of tanking the entire computer making a very expensive paper weight. Is there an another rout to take to change the default drive or change the only way .dir file? Any help is appreciated, thanks in advance.

  Basic response; your ssd is too small, even if the users folders were directed to another drive, which actually is is not supported by SM.

  And for download, I guess you mean installing programs, and if this is the case the registry setting for this works for all facilities and even if custom you install a program to a different location of files will be always written on victory drive, as will all updates of windows

• How to change the default language in Windows 7?

  Is it possible to go from one language (in this case Chinese), then permanently switch to English, without the need to buy Windows Ultimate?

  Because I won't use the language again, and I don't need all the functionality beyond that of Windows 7 Basic/Premium, so I was wondering if I can make a permanent change IE upgrade Windows 7 Basic (Chinese) for Windows 7 Home Premium (in English).

  eveeveeve wrote:

  Is it possible to go from one language (in this case Chinese), then permanently switch to English, without the need to buy Windows Ultimate?

  Because I won't use the language again, and I don't need all the functionality beyond that of Windows 7 Basic/Premium, so I was wondering if I can make a permanent change IE upgrade Windows 7 Basic (Chinese) for Windows 7 Home Premium (in English).

  Are only two ways change the OS version:

  (1) upgrade to Windows 7 Ultimate and install from Microsoft Update language packs.

  (2) purchase a license for Windows 7 in the desired language, format the hard drive and install.

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty to obtain a little temporary safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest killed a large number of philosophers.
  ~ Denis Diderot