How to get the icons appearing on the background browser in their place. Now they have moved to the right of the screen, windows vista?

Similar Questions

• How to lock the screen/window

  I'll try to find a way to lock the screen/window so that using the touchpad do not inadvertently change screens?

  Hello

  One possibility would be to disable the clickpad function that is causing this behavior.

  You can do the following.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the entry of Synaptics.

  The option, you must disable is called "Edge slips" - just click the box to remove the check mark, then click on apply and Ok to save the setting.  For an example, see the picture below.

  

  Kind regards

  DP - K

• How to get the Installation of Vista from Toshiba disk?

  I work with Microsoft technical support to solve a security problem on my Satellite Pro A210 and were now required to use a Vista installation disc.

  Microsoft says that I am entitled to an installation of the original provider of my kit disc - Toshiba. But we're not happened with my laptop - only a recovery disc has been provided.

  How can I go on the acquisition of an installation of Vista from Toshiba disk?

  Kind regards

  Kevin C.

  With Toshiba laptop, you'll get the Toshiba CD/DVD facilities only.
  This recovery media is designed for your laptop only.

  Installations from Microsoft Vista disc is not given and there is no way to get it from Toshiba.

  Microsoft can offer that you support if you only use Microsoft installations CD. Using this disk, you can install and repair Vista on each portable office/computer option. Unfortunately with the restore disc it will not work.

• How to get the screen back to how it should be as at the present time, it is on the side

  Hello

  Can your hel [, the screen of my laptop is not how it should be and is now on the side as a result of a slip of the hand and a bad button, but we do not know which key it is.

  You can advice how to get on the screen back to normal.

  Kind regards

  Anthony Lawson

  Hello

  Try holding the CTRL and Alt keys, then press the arrow pointing upwards.

  Kind regards

  DP - K

• How to get the screen coords of the node?

  For example, TextBox in VBox inside TabPane tab.
  Is it possible to obtain or calculate the screen from any corner of the TextBox element coordinates?

  I don't know how this will work because I think it does not account for the title of the window, but here is a code to help you get started.

  double screenX = node.getScene().getWindow().getX() + node.getScene().getX()  + node.localToScene(0,0).getX();
  double screenY = node.getScene().getWindow().getY() + node.getScene().getY() + node.localToScene(0,0).getY();
  

• How to get the screen saver photos slideshow goes completely after 2 minutes

  Since I got windows 7 my photo slide show I had always put to screen saver turns off after 2 minutes. I love looking at all the photos of my grandchildren, my screensaver settings is correct, but I don't want my screen to go black after only a few pictures

  Hi Emmauscapeofgoodhopesupportteam,

  I think I have the solution to your problem, who can you look at pictures of your grandchildren.

  As you said you have the correct settings for the screen saver, but your power management options can be verified.

  Please follow the instructions below.

  1. click 'START' and select 'control panel '.

  2. click on 'Harware and its' option

  3. now, select "Power Options" now you should see the options of 'Balanced or High Performance' under 'Select power management.

  4. Select the "Balanced" option and click on "change plan settings".

  5. now, you will find an option "Disable display" default is 'Never' and if not please change it to "never."

  so this should keep your monitor after happening to the screensaver. If you want to be off after some time, you can select required time to the same option settings.

  Concerning

  PCS365.10

  Just reply to your convenience.

• How to use the full Windows Vista Edition backup utility to create a backup of the computer of my computer on a network drive?

  I can read and write in my Win7 computer I'm currently configured to run any server at home, I can watch TV, store files and folders individual, to create, remove, in other words all I can do on this machine, I can do. 3. to disks are mapped to this machine and show as readers y and z.

  I had no problem establishing actions and everything seems to work.

  However, when I try to do a full backup of a computer with network drives they don't show in the drive selection drop-down list in the center of complete backup of Windows. Arises in each drive on this machine, not the target readers when they are listed in my computer and do show and reconnect when I reboot the machines.

  Any suggestion would be appreciated.

  Thank you:

  Don

  Hi Don,

  You can follow these methods & check if it helps.

  Method 1

  You can cancel the drive mapping & check if readers appear in the Windows complete PC Backup Center.

  Disconnect your computer from a network or network drive

  Reference: back up your programs, files and settings of the system,

  Method 2

  In addition, you can also follow the suggestion of TexRyker on Wednesday, February 28, 2007 18:07 from this link.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward, and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After using it for years I now get the message on the screen " Windows Vista Build 6002 this copy of Windows is not genuine "

  AAAAnd to the interest of the human mental health, I've been asked this question all on my own and started a new thread! I want to say that I took the link that I had in my e-mail by microsoft to join in the forum with excactly the same question! My appollogies all I upset and confused! But what the * I am supposed to do if Microsoft take me to a forum etc. etc. to associate myself with ppl that are having the same problem... that's all public reading for all trying to learn... If the techys said great and I don't want that they are great! give an answer to a person having the same problem, giving specific instructions to follow... that is to say, 'this type', 'type' etc... I would do the same thing... so saving the great techys having to do the same answer over and over again... I was just joining in the forum according to the instructions... what else I could do... as a noob? Any hooo, goes here; - Diagnostic (1.9.0027.0) report: - Windows Validation Data - Validation status: invalid License Code of Validation: 50 Cached Code of Validation online: 0 x 0 Windows product key: *-* - R7X4H - 6F2XJ-VVMP9 Windows Product Key hash: UqxyryRKzOt7kYPGi0qReynjiPg = Windows product ID: 89576-OEM-7332141-00216 Windows product ID Type: 2 Windows license Type: OEM SLP Windows OS version : 6.0.6002.2.00010100.2.0.006 ID: {09C2AAAB-35DD-495E-B85B-FFBA1ACDB85E} (3) is Admin: Yes TestCab: 0x0 LegitcheckControl ActiveX: registered, 1.9.42.0 signed by: Microsoft product name: Windows Vista (TM) Business Architecture: 0x00000000 Build lab: 6002.vistasp2_gdr.101014 - 0432 TTS Error: Validation diagnostic: resolution state: s/o Vista WgaER data - ThreatID (s): n/a, hr = 0 x 80070002 Version: n/a, hr = 0 x 80070002 Windows XP Notifications data - Cached result : n/a, hr = 0 x 80070002 file exists: No. Version: n/a, hr = 0 x 80070002 WgaTray.exe signed by: N/A, hr = 0 x 80070002 WgaLogon.dll signed by: n/a, hr = 0 x 80070002 OGA Notifications data - Cached result: n/a, hr = 0 x 80070002 Version: n/a, hr = 0 x 80070002 OGAExec.exe signed by: n/a, hr = 0 x 80070002 OGAAddin.dll signed by : n/a, hr = 0 x 80070002 OGA data - Office status: 109 N/A OGA Version: n/a, 0 x 80070002 signed by: n/a, hr = 0 x 80070002 Office Diagnostics: the données--025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3 browser Proxy settings: n/a User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32) default browser: C:\Program Files\Google\Chrome\Application\chrome.exe download signed ActiveX controls: fast download unsigned ActiveX controls: disabled run ActiveX controls and plug-ins: allows you to initialize and script ActiveX controls not marked as safe: disabled allow scripting of Internet Explorer Webbrowser control: disabled Active scripting: allowed ActiveX controls recognized safe for scripting : permis fichier Scan données--fichier de non-correspondance : C:\Windows\system32\uxtheme.dll[6.0.6001.18000], Hr = 0x800b0100 File Mismatch: C:\Windows\system32\browseui.dll[6.0.6000.16386], Hr = 0x800b0100 Other data-- Office Details: GenuineResultsMachineDataUGUID{09C2AAAB-35DD-495E-B85B-FFBA1ACDB85E}/UGUIDVersion1.9.0027.0/VersionOS6.0.6002.2.00010100.2.0.006/OSArchitecturex32/ArchitecturePKey***-***-***-***-VVMP9/PKeyPID89576-OEM-7332141-00216/PIDPIDType2/PIDTypeSIDS-1-5-21-127489172-3573878905-2511511925/SIDSYSTEMManufacturerNVIDIA/ManufacturerModelAWRDACPI/Model/SYSTEMBIOSManufacturerPhoenix Technologies, LTD/ManufacturerVersion6.00 PG/VersionSMBIOSVersion major="2" minor="2"/Date20050721000000.000000+000/Date/BIOSHWID44303507018400F6/HWIDUserLCID0809/UserLCIDSystemLCID0409/SystemLCIDTimeZoneGMT Standard Time( GMT + 00:00) / TimeZoneiJoin0/iJoinSBIDstat3/statmsppid/msppidname/namemodel/model/SBIDOEM/GANotification / / MachineDataSoftwareOfficeResult109/ResultProducts/Applications / / Office/software/GenuineResults Spsys.log content: 0 x 80070002 service licenses data licensing - software version: 6.0.6002.18005 name: Windows Vista (TM), Business edition Description: OEM_SLP operating system Windows - Vista, channel ID of Activation: fd3bcb98-5c55-4b2d-ae32-a4515e3c17a3 ID of the Application: 55c92734-d682-4d71-983e-d6ec3f16059f Extended PID: 89576-00146-321-400216-02-2057-6002.0000-1682011 install ID: 016895113696003725658623885756703736700974853226446774 processor certificate URL: http://go.microsoft.com/fwlink/? LinkID = 43473 Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474 use license URL: http://go.microsoft.com/fwlink/?LinkID=43476 product key certificate URL: http://go.microsoft.com/fwlink/? LinkID = 43475 partial product key: VVMP9 license status: Notification Notification reason: 0xC004F057. Windows Activation Technologies - N/D data - HWID HWID hash running: NAAAAAEABAABAAEAAQABAAAAAgABAAEAJJSo + rQTHAH + 6zReAIfk + VoX8vQG75InrFYMxQ == OEM Activation 1.0 data - s/o OEM Activation 2.0 data - valid BIOS for OA 2.0: Yes, but no SLIC table Windows marker version: n/a OEMID and OEMTableID consistent: n/a BIOS Information: ACPI Table name OEMID value OEMTableID value APIC Nvidia FACP Nvidia SSDT PTLTD POWERNOW MCFG Nvidia AWRDACPI AWRDACPI AWRDACPI

  Diagnostic report (1.9.0027.0): - Windows Validation Data - Validation status: invalid license Validation of Code: 50

  Code of Validation caching online: 0x0

  Windows product key: *-* - R7X4H - 6F2XJ-VVMP9

  Windows product key hash: UqxyryRKzOt7kYPGi0qReynjiPg =

  Windows product ID: 89576-OEM-7332141-00216

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.0.6002.2.00010100.2.0.006

  Data analysis of files-

  [File mismatch: C:\Windows\system32\uxtheme.dll[6.0.6001.18000], Hr = 0x800b0100

  [File mismatch: C:\Windows\system32\browseui.dll[6.0.6000.16386], Hr = 0x800b0100

  SYSTEMManufacturerNVIDIA/ManufacturerModelAWRDACPI/model/SYSTEMBIOSManufacturerPhoenix Technologies, LTD./ManufacturerVersion6.00 major PG/VersionSMBIOSVersion = '2' minor="2"/Date20050721000000.000000+000/Date/BIOS

  Licensing of data-

  The software licensing service version: 6.0.6002.18005 name: Windows Vista (TM), Business edition Description: Windows operating system - Vista, channel OEM_SLP

  Partial product key: VVMP9

  License status:

  Reason of Notification notification: 0xC004F057.

  OEM Activation 2.0

  Data - Valid BIOS for OA 2.0: Yes, but no SLIC table

  No problem - it happens :)

  Thanks for reposting.

  Unfortunatey the formatting of the report is turned to h3ll, so I can miss somethig. but that's...

  Your problem is due to what looks like two things - fixable one and the other perhaps not repairable.

  (1) your installation is licensed OEM_SLP, on what appears to be a motherbaord detail - have you replaced the motherboard at all, or sent to the machine to be repaired? I to this is the maor problem eventually and not repairable.

  (2) you have a couple of current file incompatibilities, which would also cause non-genuine advice. There is no point in trying to fix this unti, we establish the situation wth the motherboard and the Windows license.

  Is there a COA sticker on the case of the machine? If so, what version and edition of Windows is valid? (NOT posting the key!)

  What is the brand and model of the machine - or is it a machine on measurement or house built?

  If homebuilt - it seems that someone has installed the system using the recovery to an Asus computer disks. This does not work, because the Recoverydisks require the appropriate BIOS to work properly.

  post back with your answer, and we'll go from there.

• How to install the DLNA Windows Vista?

  Hello! I have laptop Toshiba Satellite A305 with Windows Vista.  I need to install the DLNA software. Please if you can help me.   Thank you very much!  My name is Charles Benson.

  Hello

  DLNA (Digital Living Network Alliance) provides many products certified to download and use them for, you must have a home network configuration.

  For more information see the link below.

  http://www.DLNA.org/digital_living/Getting_started/

  DLNA certified product search

  http://www.DLNA.org/products

  See also:

  http://www.DLNA.org/retail/home

• How to get the current windows user name

  I was wondering if there is a way to get current pc windows user name in labview?
  If there is a way bwsides navigate manually to the folder user thr and stripping the way please let me know.

  It's one of this method

• How to get the system screen resolution

  Hi all

  
  I'm developing a flex application in adobe flex3. When I draw components in the design area flex builder is set to "Fit to window". so application are displayed on my monitor(17") correctly, but when I try to run the same application to another computer or a laptop of 14" display screen is different than the screen of the monitor is short, I need to scroll down to see the full page. My question is how can I make sure that the application should search for uniform on different platform/different browsers and different monitors (regardless of the dimensions of the monitor).

  And how can get the screen resolution of system during execution?

  
  Thanks for all the help and support.

  Look in flash.system.capabilities.  Note that any application based on a browser usually does not control how big be.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• "Re: Satellite A300: how to get the BT icon in the computer" window like any other device

  Dear experts,

  I own a computer Satellite A300 series laptop with Vista Home Premium 32 bit.
  Previously, "Interchange of information bluetooth" icon allows to be appeared in the 'Computer' window as "other devices."

  Today, I noticed that the icon is disappered from "computer"window, but if I have BT of the the taskbar or system tray icon, it works very well. "

  I can send file from laptop to mobile and vice varsa.

  but I need this icon to the desired location (IE, the working window) to open the window of bluetooth information interchange in order to obtain full access to the mobile Assembly file into the laptop. (when I need a number of files to copy to phone from a mobile phone in turned monkey)

  Please tell me how to get this icon back in; computer"window?

  Hello

  I think that this appears if the BT device has been activated.
  Disabled or not connected devices does not appear under "My Computer" until the devices are connected.
  Please activate the BT using FN + F8 first, then check the my computer window.

  Welcome them

• How to get the icons to display correctly in the Finder?

  At the time of the "classic" Mac OS, if the icons are not correctly display in the Finder, we could 'rebuild the desktop file' to correct the problem. I've recently updated to Yosemite, and most things work well, but for some reason, most of the files in the Finder .webloc now show as blank icons (but not all; a few show the correct icon). There is no model, I can see: some very old .webloc files now show a white icon (where I know that their icons used to be correct), while the most recent show the icon of correct - although I just created four (by dragging the URL of the Safari, the usual method) which are all empty. Sometimes they appear with the older icon, with the symbol @ (although those who seem to have changed vacuum after running and restart maintenance). I tried from an external disk, repair permissions and repair the file system, as well as cleaning with the utility of Maintenance (which clears the web browser and other caches), nothing works. Does anyone know how to get the computer to display these icons correctly?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.finder.plist and com.apple.desktop.plist.  Move the .plists on your desktop.

  Relaunch the Finder by restarting the computer and test. If it works fine, delete the plists from the desktop.

  If the same, return the .plists to where you obtained since, by crushing the latest.

  Thanks to leonie for certain information contained in this.

• How to get the MacBook Pro 10.8 to connect to LaserJet P1006 shared by Vista-based computer

  HP Laserjet P1006 have connected via USB cable to the computer Windows Vista (SP2).

  Prints fine in the windows box.

  In vista, windows shares.

  Try to connect the printer to a Macbook Pro 10.8.

  HP1006 drivers downloaded from the HP website.

  Tried to connect via SMB, as many websites has loaded. (Using the Advanced tab and selecting the printer from windows via spoolss.

  When I print, I see the print job to start, but nothing ever happens. I have to cancel the job.

  I also tried to activate LPD on vista and then connect a Mac using the LPD.  Similar results.

  HP has a guide that guide a person through how to share a windows computer and then connect a 10.8 Mac to the windows computer to printing?

  Something else which also confuses me, even if I installed the drivers 1006 on Mac, they do not appear when I goto Advanced-> use: choose a driver model or a printer.

  Hello

  First of all, that the drivers installed on the HP site?

  The printer drivers for 10.8 non-existent Apple and not on the HP site, downloading the site exclusively for Mac OS X 10.5 or lower.

  If you have installed a HP software, remember to delete following HP uninstaller or manually remove drivers by going to the library > printers and moving the HP folder in the Recycle Bin.

  Next enter SDPP/happy/Resources. You can get P1006 in this folder and move the files to the trash.

  Then, install the following package to have the printer drivers installed on your system:

  http://support.Apple.com/kb/DL907

  Once the drivers insalled, follow the steps below to try to add the printer manually:

  1. Choose System Preferences from the Apple menu.
  2. Choose Print & Scan.
  3. Click on the button + to add a printer.
  4. Press the control key while clicking on the icon 'Default' (or any other icon on the toolbar), and then choose Customize toolbar on the shortcut menu that appears.
  5. Drag the icon of advanced (gear) in the toolbar.
  6. Click done.
  7. Click on the Advanced icon that has been added to the toolbar.
  8. Choose the menu Type drop-down Windows.
  9. In the URL field, type the address of the printer in one of the following formats:

     SMB://workgroup/server/sharename
     SMB://Server/sharename

     Note: "workgroup" is the name of the Windows workgroup that the computer sharing the printer belongs. "Server" is the name of the computer sharing the printer (or its IP address). "share name" is the shared Windows printer share name. If the share name contains spaces, replace each space with "% 20" (without quotes).

     Tip: you don't need a "working group" when you specify the IP address of the computer (for example when the printer is on a different subnet), or if your Mac belongs to the same workgroup Windows (SMB).

  10. In the name field, type the name that you want to use for this printer in Mac OS X.
  11. Select the appropriate PPD or printer driver from the pop-up menu "with the help of Print."
  12. Click on Add.

  Printer sharing is a feature of the operating system and not a feature provided by HP, still further it is more complicated and involve many aspects of operating system (e.g. advanced Options of sharing, etc.) while using such a device on a such different envoirnments, why HP doesn't provide any guide also and do not support such a task.

  Hope you find this information helpful,

  Shlomi

• How to get the text have the same effect as the video?

  Hello

  For the first time post here, but I wonder how to get the text of the titles have the same effect as the video behind her.

  For my video, I use 'bad tv' and other effects such as Gaussian that obviously changes the appearance of video, creating the look of VHS. However, I then inserted text via the title, but it normally appears. How can I make this text have the same effects as the video behind it?

  A friend told me I might need to add text to the video first, then do the effects, I have not tried, but wonder if there is an easier way, as this would require me to restart.

  EDIT: That's what I'm looking for. https://youtu.be/7_2PHQI89dI?t=24s The text has the same effect as the video.

  Thank you

  One way is to create a clip made up based on the title and the original clip. Then apply the effect.

  Another way is to use an adjustment layer.

  Good luck.

  Russ