How to get the ICS in my area

Similar Questions

• How to get the largest possible document area limits?

  Hello!

  I'm trying to improve the treatment of GuideGuide to guides to Illustrator. So far I have not found a way integrated to add guides, so I draw a path, and then set its value true guides. While this works, it has the disadvantage that I need to understand the location of the limit of the guides in addition to the place where I want to place.

  For my example, I use a horizontal guide.

  Looking at how Illustrator handles things, it seems to add guides within the max and max left right of the document. Remember, it is possible to place objects even further beyond these limits, but they are the limits of Illustrator watch visually. This is the behavior that I am trying to imitate.

  So far I have not found a scripted way to extract these limits of Illustrator, but my test has shown so far that the width and height max of document is 16383pts. You would think it would be as simple as placing a border guide to 0 and 16383, but the origin of the document seems to be at the Center. One would then think that (16383/2) *-1 would be the edge of the document, but this also does not turn to be true. So far, in my tests at the origin of the document is fluid, sometimes in the Middle, sometimes offbeat. I tried incorporating the pageOrigin document, but also proved not to be useful. I'm even taking into account the differences in plan of work/paper Guide and have still found no obvious solution.

  Am I missing some obvious details that can be used to pull these values from Illustrator? This looks like something that would be relatively easy to do.

  

  Hi Silly-V and cameronmcefee,

  try this excerpt:

  // RectangleMaxPasteboardBounds.jsx
  // ArtboardMaxPasteboard2.jsx
  // try to create a rectangle with the max. pasteboard bounds
  // regards pixxxelschubser Sept. 2016
  
  if (app.activeDocument) {
      var aDoc = app.activeDocument;
      var ABR = aDoc.artboards[0].artboardRect;
      var total = Math.pow (2, 14)-1;
      var topLeft = Math.ceil (-total/2);
  
      var maxAB = new Array();
      maxAB.centerX = (ABR[2].toFixed(5)-ABR[0].toFixed(5))/2;
      maxAB.centerY = (ABR[3].toFixed(5)-ABR[1].toFixed(5))/2;
      var xSubstr = (maxAB.centerX < 0) ? Math.floor(maxAB.centerX) : Math.ceil(maxAB.centerX);
      var ySubstr = (maxAB.centerY < 0) ? Math.floor(maxAB.centerY) : Math.ceil(maxAB.centerY);
      maxAB[0] = topLeft+xSubstr;
      maxAB[1] = -topLeft+ySubstr;
      var Rect = aDoc.pathItems.rectangle(maxAB[1], maxAB[0], total, total, false);
      Rect.stroked = false;
      Rect.filled = false;
      Rect.selected = true;
      alert("Rectangle created");
      } else { alert ("no open document"); }
  

  Have fun

• How to get the new activation key when some numbers are taken away and you have received?

  How to get the new activation key when some numbers are taken away and you have received?

  Have a laptop with windows 7 from Dell. Need to re install W7. And I have some numbers are taken as a result of its use.
  How can I get a new code activation or my complete activation code?
  Best regards, W7 user

  How to get the new activation key when some numbers are taken away and you have received?

  
  Have a laptop with windows 7 from Dell. Need to re install W7. And I have some numbers are taken as a result of its use.

  How can I get a new code activation or my complete activation code?

  Dell provided you with restore/recovery media and/or a way to restore the machine 'default' as a key sequence?  If so - you won't need the number--unless they just sent a DVD of Windows 7 nu - and they are usually not unless you ask.

  They have probably installed using their key, which means that even with a utility like Belarc Advisor or ProduKey - you will not get the product key that matches the one on the sticker.

  Some may have you take several different digital pictures of the sticker from different angles and see if you can decipher the missing characters like that (you'd be surprised to see how that works).

• How to get the logical tab in the main area of 4.1.2 Data Modeler?

  I just installed Oracle Developer Data Modeler: Version 4.1.2.895.

  I was following section 2.1 development of the logic model

  http://docs.Oracle.com/CD/E48219_01/doc.40/e48205/tut_data_modeling.htm#DMDUG36169

  I used the example of library. I added the areas.

  Then I tried to create the books.

  The document says:

  1. In the main area (right) of the Data Modeler window, click the logical tab.
  2. Click the icon of the new entity.
     
     

  But I don't see the logical TAB on the right side at all.

  I see the Start Page. On the far right is the browser window. Basically, I see Messages - Log.

  On the left side, I have the browser window.

  Can someone tell me please how to get the logical TAB in the main area?

  Thanks in advance.

  Hello!

  In the browser with the right button on the logic model and select view.

  I hope this helps!

  Heli

• During the import of my camera or a file in Lightroom 5 my pictures are too exposed by 1-2 stops, while they are well exposed on the screen of the device. How to get the "right-exposed images on the screen?

  During the import of my camera or a file in Lightroom 5 my pictures are too exposed by 1-2 stops, while they are well exposed on the screen of the device. How to get the "right-exposed images on the screen?

  There is an option in your Lightroom preferences, under the general tab, "treat JPEG files next to raw in form of images". If you have this option is checked, then Lightroom will import and view your first two and JPEG files. You use the active D-lighting on your camera? If you are, you must disable this feature.

• Re: How to get the Tempo to work properly?

  Hello

  I have problems with the service of Tempo.

  I don't get updates via this application (all the settings of this application are accurate, i.e. "full control"). I know this because there are updates available online to my laptop via the pilot site of toshiba.

  When I installed first Tempo, updates for about a month, I received, and then all of a sudden, no update came through. My firewall is blocking either of this application.

  I tried to reinstall the application, but no change in the situation.

  Does anyone know if ALL updates are available via the website of driver toshiba out tempo? Because, in the month that this service worked, I got an update of the bios, but I recently saw a bios update online and Tempo has not always reports that it is available.

  Any ideas on how to get the Tempo to work properly?

  Thank you.

  I saw in your other thread you have installed SP1 on your Vista laptop.
  There may be some compatibility problems between SP1 and Tempo

  And Yes, as far as I know Tempo bring all available updates!

• I rolled again Firefox 4.0 to 3.6 and now my navigation bar still looks like instead of 3.6 4.0 how to get the old layout back?

  I rolled again Firefox 4.0 to 3.6 and now my navigation bar still looks like instead of 3.6 4.0 how to get the old layout back?

  The fastest way is to use the option 'Restore the default toolbar set' as shown here - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

• How to get the card working on Tecra M1 WLAN?

  I just bought a 2nd hand Tecra M1. Great! It has installed XP but no Toshiba tool. I can't access my WLAN router. Seems like if WIFI connection is not yet installed. As I know from my Satellite Pro M30, there are Toshiba tools for this, they work smarter.

  Maybe I need drivers - WXP is material unknown when starting up - might be the WLAN device - who knows.
  When I check the network connections, I find 1934 and LAN adapter, but no WLAN device. I have already run the XP Wizard for WLAN connections, SSID and hexagonal key; but no WLAN device presents itself.

  Then, someone a idea how to get the job of WLAN?
  Is it possible to get the Toshiba M1 software or can I use my software SatPro?

  Thank you Jan so far

  It's good that you will find yourself, I think most of us would point on your ad when you have users with a similar problem. Sometimes it s really useful to have users like you who will investigate their cases.

  I'm now long enough a Member here, but every time I have met people who have solved problems like that, then I must say how much I appreciate it. :)

  Welcome and good weekend

• Satellite A500 PSAM3A - how to get the HARD market under Vista 64-bit disk Protection System

  Hello

  I would like to know how to get the HARD drive Protection system up and running under Vista Home Premium 64 bit operating system. I downloaded the program 64 bit of Toshiba for this program and install it I tried but doesn't seem to work. I have uninstalled and try to install the program, but still does not work.

  Unable to find the problem, why it won't work. If anyone knows how to solve this problem it would be a great
  help for me. If anyone knows how to solve this problem please answer me as soon as possible.

  Thank you for your time.

  Kind regards
  Nigel.

  Hello!

  What you downloaded exactly on the Toshiba site?

  As written Akuma you must install first added value Package you will find also on the Toshiba site. Check this box!

  An interesting thing: it does not work if you are using the preinstalled operating system? It should have everything installed for your laptop.

  Good bye

• How to get the icons to display correctly in the Finder?

  At the time of the "classic" Mac OS, if the icons are not correctly display in the Finder, we could 'rebuild the desktop file' to correct the problem. I've recently updated to Yosemite, and most things work well, but for some reason, most of the files in the Finder .webloc now show as blank icons (but not all; a few show the correct icon). There is no model, I can see: some very old .webloc files now show a white icon (where I know that their icons used to be correct), while the most recent show the icon of correct - although I just created four (by dragging the URL of the Safari, the usual method) which are all empty. Sometimes they appear with the older icon, with the symbol @ (although those who seem to have changed vacuum after running and restart maintenance). I tried from an external disk, repair permissions and repair the file system, as well as cleaning with the utility of Maintenance (which clears the web browser and other caches), nothing works. Does anyone know how to get the computer to display these icons correctly?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.finder.plist and com.apple.desktop.plist.  Move the .plists on your desktop.

  Relaunch the Finder by restarting the computer and test. If it works fine, delete the plists from the desktop.

  If the same, return the .plists to where you obtained since, by crushing the latest.

  Thanks to leonie for certain information contained in this.

• Chart WPF: How to get the limits of PlotArea and axes

  I can't find explicit methods to get limits of PlotArea and axes.

  Please let me know workarounds if they are available. Actually a post explains how to get the PlotArea limits using RangeCursor. Are there alternative means for shafts?

  The photo below shows what I did in WinForms with the methods GetBounds and HitTest. I would like to draw the ornaments on the chart in WPF.

  

  I have attached a code example of this look ornaments around the plot area and the scales.

  Note that this relies on implementation details of the current version of WPF controls for the ornaments of the scale, as it was more effective than gradually points to test in the graph using the GetScaleAt method. We have intentionally left much of the underlying primitive types with a minimum documentation, like us they have changed in the past and may change in the future. Although these exact members can be removed in a future release, we do not expect to provide an equivalent function and stabilize the primitive API over time.

• How to get the IP address of the client when TCP connect on the server

  How to get the IP address of the client when TCP connect on the server.

  The only parameter obtained the login is the login ID.

  I assume you are using "Wait of TCP on the listening port" on the server. This returns the remote address and port (like out in option).

• How to get the items on a loop at the same time during the execution of the loop for

  Hello

  I am a student. I would like to know how to get the outside loop counter values For in parallel so that the loop runs rather than obtaining the value finally outside the loop for future prospects for the answers.

  Thank you

  Frederick

  You already said yes, and you have said some of the different ways (registrants, locals, reference, queue, etc.). Since the information was provided to your request, the thread can be considered closed? If you want details about how to implement something, you must provide the details on what you are doing.

• How to get the reference or the property of a member in OOP node?

  Hello world

  Is it possible to get the referral of a member in OOP?

  After you have created a class and an insert, a member of control in the cluster, I conclude that, when a right click on it, there is no element of "creat-> reference" or "create-> property node?

  So, how to get the reference or the property of a member in OOP node?

  Hello

  There are a few reasons that you can't do what you want to do:

  1 al ' LVOOP ordinary (as opposed to the DVRS in LabVIEW 2009, or some other framework / pattern design) are items of LabVIEW by value, as a cluster and therefore you can not create a reference to a class.

  2. a control of the object (this is what you get when you drop an object on a façade) is a 'black box' because you cannot look inside. This is to support the idea that the class data private. This means that you can't get a reference to all internal control when its on a façade

  3. check the references are valid only for the controls in the Panel before and therefore any class (or other piece of data of LabVIEW) on a wire / shift register / constant / anywhere other that of the façade, will have only the data portion of the available control.

  To access the items within a class, you create the accessor screws (you can create them easily by right-clicking a class (or the folder within the class) in the project tree and selecting New-> VI to access data members.) This VI would at least have a unbundle / bundle node (depending on whether its read/write) and could, if you have many more features such as range checking. You can use this VI whenever you want to read the Member your interested.

  I hope this helps.

  Shaun

• How to get the string (specified by row and column) of txt file with labview

  Hello world

  How to get the string (specified by row and column) of txt file with labview

  THX

  As far as I know, a text file has no column.  Be more specific.  Do you mean something like the 5th word on line 4, where the words are separated by a space, and lines are separated by a newline character?  You can read from the spreadsheet String function and set the delimiter to a space.  This will produce a 2D channels table.  Then use the table to index and give the line number and column number.