How to get the label of the COM ports?

Similar Questions

• How to install the Com port in Windows 7

  I would like to use the COM port in the Toshiba laptop, but I can't find it in the Device Manager. It is important to communicate with another device via a serial port.

  Given that the PC operating system is windows 7, I have not dealt with the problem.

  Where can I get the files to install COM port?

  Or is there any facility for her?

  If someone knows solutions to the problem, let me know.

  If there is no COM port or other device showing in Device Manager you will need to activate the serial port/COM in the BIOS of the laptop, assuming that the laptop has a COM port.

• Satellite C660: How to get the HDMI port?

  Hello

  Could someone tell me how to get hdmi on the laptop as the laptop has a hdmi port

  Thank you

  Hello

  But what C660-xxx you? Perhaps you could use a
  It is not possible to add arbitrary ports.

  Ports are part of the motherboard and if the laptop does not provide an HDMI port, so, you will not be able to use that :(

  Of course, you could use a device that would be to convert a digital video signal, but they are expensive and in my opinion not worth trying it s better to buy a laptop that would support the HDMI port instead of buy a converter for 200-$300

• How to get the server port in the operation of the component.

  Hi all

  How can get port information no server in what component work.

  You can get by using sharedObects

  see this

  http://www.techartifact.com/blogs/2013/10/get-intradoc-server-port-in-custom-component-in-WebCenter-content-UCM.html

• allow non-admins to use the COM port?

  Hi all
  does anyone know how to change the COM port settings so that the ports are "activated" for users other than just the administrator?
  Thank you very much!

  Hello

  You must have administrator privileges to change the COM port settings To do this, you should contact the administrator of the computer.

  Hope this information helps.

• need to set the com port for adapter Series USB Belkin need com 1 or 2 default to com8

  I have a belkin Windows serial adapter 7 puts on com8 and I have equipment that does not download that on port com 1 or 2 How can I change the Compote?  I can't change my gear to any other comport com just 1 or 2.  There is nothing assigned to com 1 or 2 on my pc I can find in the hardware configuration.

  Check the documentation that came with the device or on the Belkin support website.  How to change the COM port is specific to the device and its drivers, nothing in Windows that can force this change for you.

• How to get the text of a SystemPrompt (Cascades)

  Hello

  I've been struggling with this for a few hours now. I followed the example of "dialogues" on github, so I have successfully created a SystemPrompt (the dialog box that allows the user to enter text and accept / reject). Curiously, in this example there is no use of user text input. Do you know how to get the text in my QML? Here you have an example of code that I use:

  My QML:

  // Default empty project template
  import bb.cascades 1.0
  import bb.system 1.0
  
  // creates one page with a label
  NavigationPane {
      id: navigationPane
      Page {
          attachedObjects: [
              SystemPrompt {
                  id: prompt
                  title: qsTr("Enter a text for the label")
                  modality: SystemUiModality.Application
                  inputField.inputMode: SystemUiInputMode.Default
                  inputField.emptyText: "Label text..."
                  confirmButton.label: qsTr("Ok")
                  confirmButton.enabled: true
                  cancelButton.label: qsTr("Cancel")
                  cancelButton.enabled: true
                  onFinished: {
                      if (result == SystemUiResult.ConfirmButtonSelection) {
                          lab1.text = ????? // Here is where I don't know what to do
                      }
                  }
              }
          ]
  
          Container {
              layout: StackLayout {}
  
              Label {
                          id: lab1              text: "Label text"
                  objectName: "lab1"
                  textStyle.base: SystemDefaults.TextStyles.TitleText
                  horizontalAlignment: HorizontalAlignment.Center
              }
  
              Button {
                  text: "Update label"
                  horizontalAlignment: HorizontalAlignment.Center
                  topMargin: 150.0
                  onClicked: {
                      //_appUi.editLabel();
                      prompt.show();
                  }
              }
          }
      }
  }
  

  Be sure to add this in your .cpp file or all of app:

  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  

  and don't forget to include them in your app .cpp file (probably not all are needed, but just in case I leave here for the moment):

  qmlRegisterType("bb.system", 1, 0, "SystemUiButton");
      qmlRegisterType("bb.system", 1, 0, "SystemUiInputField");
      qmlRegisterType("bb.system", 1, 0, "SystemToast");
      qmlRegisterType("bb.system", 1, 0, "SystemPrompt");
      qmlRegisterType("bb.system", 1, 0, "SystemCredentialsPrompt");
      qmlRegisterType("bb.system", 1, 0, "SystemDialog");
      qmlRegisterUncreatableType("bb.system", 1, 0, "SystemUiError", "");
      qmlRegisterUncreatableType("bb.system", 1, 0, "SystemUiResult", "");
      qmlRegisterUncreatableType("bb.system", 1, 0, "SystemUiPosition", "");
      qmlRegisterUncreatableType("bb.system", 1, 0, "SystemUiInputMode", "");
      qmlRegisterUncreatableType("bb.system", 1, 0, "SystemUiModality", "");
      qRegisterMetaType("bb::system::SystemUiResult::Type");
  

  Thank you very much

  If you look very carefully by the docs, you'll trip over https://developer.blackberry.com/cascades/reference/bb__system__systemprompt.html#inputfieldtextentr...

  So, replace your? with inputFieldTextEntry() and you will get the text you need.

• How to get the podcast of the website on the phone

  I was told to put that feed into the PODCASTING app on your iOS device.

  The site in question is https://randirhodes.com/how-to-get-the-podcast/

  I paid for a premium podcast, now how o I get this podcast to appear on my iphone 6 s more in the podcast app?

  Podcasts > select my Podcasts > press the '+' > Add Podcast > paste the URL that you got on the site.

• where and how to get the new Firefox add - one of who is spying on us. Please mail to...

  Heard speak adds the new on Fire Fox. Where and how to get the new Firefox add - one of who is spying on us. Please mail to maheshubhayakar at rediffmail.com

  edited by email address - moderator

  It is helpful if you provide a link to the article you were reading.

• I rolled again Firefox 4.0 to 3.6 and now my navigation bar still looks like instead of 3.6 4.0 how to get the old layout back?

  I rolled again Firefox 4.0 to 3.6 and now my navigation bar still looks like instead of 3.6 4.0 how to get the old layout back?

  The fastest way is to use the option 'Restore the default toolbar set' as shown here - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

• How to get the physical credit iTunes gift card?

  How to get the physical gift card iTunes on your iTunes store account balance?

  • You cannot buy an iTunes gift with in-store credit.

  See the link below to buy physical gift cards for iTunes.

  http://www.Apple.com/shop/gift-cards

• How to get the manual for Satellite Pro 4200?

  How to get the manual for Pro 4200. I have download olm_up and setup.exe (72 kt) of http://eu.computers-toshiba-europe.com?.

  Hello

  Please visit this link:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp

  I m you will find a good manual of your device.

  Good bye

• You will need to plug Sony IEEE 1394 camcorder to an iMac. It would connect to the thunderbolt via an adapter port? I have a cable of firewire 800 and wanting to know how to get the video of my iMac. Thanks for any help you can give :)

  I borrowed a camcorder tape Sony that has an IEEE 1394 (ilink Sony) and eager to download video from my iMac.

  It would connect to the thunderbolt via an adapter port?

  I have a cable of firewire 800 and wanting to know how to get the video from my iMac via this cable.

  Appreciate any help you can give :)

  You want a Thunderbolt Apple FireWire adapter. Here is a link (to the US store):

  http://www.Apple.com/shop/product/MD464LL/A/Apple-Thunderbolt-to-FireWire-ADAPTE r? FNODE = 8 b & fs = f % 3Dadapter % 26fh %3 D 4595% 252B45b0

  Sorry, I don't know what software you need to play your video, once you get the cable work.

• How to get the icons to display correctly in the Finder?

  At the time of the "classic" Mac OS, if the icons are not correctly display in the Finder, we could 'rebuild the desktop file' to correct the problem. I've recently updated to Yosemite, and most things work well, but for some reason, most of the files in the Finder .webloc now show as blank icons (but not all; a few show the correct icon). There is no model, I can see: some very old .webloc files now show a white icon (where I know that their icons used to be correct), while the most recent show the icon of correct - although I just created four (by dragging the URL of the Safari, the usual method) which are all empty. Sometimes they appear with the older icon, with the symbol @ (although those who seem to have changed vacuum after running and restart maintenance). I tried from an external disk, repair permissions and repair the file system, as well as cleaning with the utility of Maintenance (which clears the web browser and other caches), nothing works. Does anyone know how to get the computer to display these icons correctly?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.finder.plist and com.apple.desktop.plist.  Move the .plists on your desktop.

  Relaunch the Finder by restarting the computer and test. If it works fine, delete the plists from the desktop.

  If the same, return the .plists to where you obtained since, by crushing the latest.

  Thanks to leonie for certain information contained in this.

• How to find number of disabling modem com port if I know the name of the interface of the modem?

  Hello

  I know that if I see a modem device in Device Manager, I can do a right click on it, go to properties, then click the Modem tab for the port com for this modem device number. But how can I do deactivation in Labview? I hope that I can search by the name of modem which is known to me and then retrieve the com port number in labview code. I tried the Resource.vi find visa, but did not get something useful. Anyone has any experience on this?

  Thank you

  Spring

  
  

• How to get the alert or deducted to the admin if the user AD installation of application in the domain system?

  How to get the alert or deducted to the admin if the user AD installation of application in the domain system?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/winserverDS

  It will be useful.