How to get the message that API to a new version were supported once it is released?

Similar Questions

• How to get the message that I want to display only.

  Hello

  I use in my main power system which is connected with different instruments as a data logger, GSM, GPS...

  In my main vi all the Subvi electrical system, gsm etc. are interconnected.

  I would like to make a few changes,

  for example when I run my vi It should seems to jump to the top of msg as of course do your power supply works.

  and if assume that its not on then display the pop up msg that your power supply is turned off, then system must be turned off, means no need to continue the operation.

  Here I am attaching my vi, I did a logic in which concerns, in that when I run my main vi I get msg to make sure that the power supply works.

  but when the power supply is off, and then I got error msg like your power supply is turned off and after clicking ok error vi is open I don't want, that all the I have attached here.

  I want only msg that your power supply is turned off and then the system must be disabled, nothing more.

  you please guide me that this King of the changes that I needed to do this.

  Thank you much in advance.

  HIII, I thank you for your time.

  Finally, I got solved.i need to make only small cahnges in this stop button in any loop.here as an attachment, I put this solution.

• Why do I get the message that my operating system is not supported?

  My computer is running Windows 7-64 bit. I have the latest softwear on my iPhone and my iPad. I installed edge inspect on these devices and have the advantage of Google Chrome to inspect the installed extension. I have enter my password strengthened for both devices in the Chrome extension. Why do I get the message that my operating system is not yet supported?

  It's VERY interesting... even if I got this weird message, once I connected my iPhone and my iPad to the extension of Google, it worked! See all what I automatically in Google Chrome displays in the application of edge inspect on small devices. It's clean! The only problem I see is that Adobe needs to replace the error message with information about the use of the application.

• I installed FireFox 21.0 4 times and I still get the message that I need to update. How to stop this nonsense?

  I installed FireFox 21.0 four times, and I always get the message that I need to update.
  How to stop this nonsense?
  Mike

  Hello mike, please refer to the article according to How to set preferences that will not save (especially the part about the user.js file), that could also apply to your question...

• I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

  I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

  Hi sonalnj,

  I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

  According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

  iPhone 6 s Tech Specs
  http://www.Apple.com/iPhone-6s/specs/

  Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

  OS X Lion mountain
  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

  Update of OS X El Capitan
  https://support.Apple.com/en-us/HT201475

  Nice day!

• my hotmail account, I get the message that message was sent but not able to be saved in the sent folder since exceeded 5120MB.pls Tips how they can be saved in the sent folder.

  I sent the email, but I get the message that it cannot save in the FOLDER SENT from storage has exceeded 5120 MB
  How can I register my email sent?

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• How can I change my photos of the PDF to JPEG? When I try to print photos from my computerl I get the message that the file is a postscript.

  O.K.   I can't print photos from my computer.   When I find a picture & click on 'print', I get the message that the image is a postscript file.  How can I change the @# $$ %% @ * thing back to where it is a jpeg image?

  Click Start > run > type CMD > Ok. Command prompt opens. On the command line type or paste each of the commands below, one at a time, pressing ENTER after each command. Restart the computer and attempt to print the photos.

  Assoc.JPEG = jpegfile

  Assoc.jpg = jpegfile

  In addition, what makes you think that file associations have been changed to PDF format? You can right click on the files in question > will the properties and the file type. It would be very strange for jpeg files have been changed to PDF format. Possible but, strange.

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.

• Last week my office pc willnot go in standby mode, it stops, and then in the am I get the message that stop you the bad way how to fix

  Last week my desktop pc will not go in standby mode, it stops then am I get the message that he was arrested by mistake.  How to fix

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Method 1 : check the clean boot and see if the problem is solved or not.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: perform step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Method 2: Update the display driver and check if the problem is solved or not.

  Updated a hardware driver that is not working properly

  Hope that helps.

• I can't delete my emails, get the message that an unknown error has occurred how fix this so I can delete my emails again?

  Original title: direct email from Microsoft

  I can't delete my emails, get the message that an unknown error has occurred how fix this so I can delete my emails again?

  To help you effectively, we need to know exactly which e-mail system you use.  You can see the differences here

• I paid for CC (photography) and yet I still get the message that I'm in the 'trial period' when I open Photoshop. How can I fix it?

  I paid for CC (photography) and yet I still get the message that I'm in the 'trial period' when I open Photoshop. Please tell us what should I do to solve this problem.

  Hi Raoul,.

  In addition to the steps above, you also follow instructions on the link below.

  Applications creative Cloud back in test mode after an update until 2015 for CC

  In case you are working on a windows machine and after following the instructions above, you still encounter the same problem, can you please review the instructions below.

  1. Restart the computer in safe mode with network.
     • Immediately after the computer is turned on or restarts (usually after your computer beep), press F8 at 1-second intervals.
     • After that your computer displays hardware information and performs a memory test, the Advanced Boot Options menu appears.
     • Use the arrow keys to select Safe Mode or Safe Mode with network and press ENTER.
  2. Please sign out and sign back for the creative Cloud Desktop Application and verify that the subscription is not trial showing.
     • Connect and disconnect activate Cloud Creative applications
  3. Restart the computer and check the creative Cloud Desktop Application.

  Hope this will solve your problem.

  Kind regards

  Hervé Khare

• I can't sync my phone to my computer and get the message that my phone doesn't have the latest version of Itunes. I downloaded the latest version on my mac, but what I do on my phone. I'm used to be able to synchronize the two.

  I am more able to sync my I phone on my Mac and get the message that my phone cannot be used because it requires a newer version of iTunes. He tells me to go to www.itunes.com to download the latest version of iTunes... I downloaded the latest version on my mac, but what I do on my phone? I used to be able to sync the two and now I can't even download the photos from my phone on my mac...

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• Cannot open attachments in Microsoft Outlook, to get the message that Windows found that this file is potentially harmful and has blocked access to this file

  Original title: prevention of security Windows opening attachments

  I can't open attachments on emails sent to my email for Microsoft Outlook - it has recently started to happen. I tried to change the security settings in Outlook but they seem to be on the normal and the option to block potentially harmful messages is not checked. When attempting to open the attachments, I get the message that Windows found that this file is potentially harmful and has blocked access to this file. Any can you please suggest how to change it, it occurs on all email attachments, even those I know are safe of them have opened on another computer.

  Thank you, Alistair.

  Hello

  Sorry to hear that.

  You use a browser to open emails or a customer e-mail like Outlook Express?

  Respond with more information so that we can better help you.

• I had my computer repaired and now I get the message that I need to activate Windows. When I put in the product key, I get the message that this is a mistake. Is there anyway to fix this?

  Product key for Windows Vista

  I had my computer repaired and now I get the message that I need to activate Windows.  When I put in the product key, I get the message that this is a mistake.  Is there anyway to fix this?

  Activate by phone

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  Pay attention to step 2: how to do a phone Activation.
  Note: If the activation service informs you that she has failed and cannot help with activation, thenSTAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Vista.

• I recently downloaded a program on my computer by mistake. When you try to uninstall, I get the message that I don't have authority to remove the program

  I recently downloaded a program on my computer by mistake. When you try to uninstall, I get the message that I don't have authority to remove the program and contact the system administrator. I am the administrator and logged as such.

  See if that helps.

  How to take possession of an item in Vista. Works also under Windows 7
  http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

  And possibly:

  Revo Uninstaller
  http://www.revouninstaller.com/revo_uninstaller_free_download.html