How to get the normalizede power spectrum or spectrum of amplitude in laview?
Hi, I'm recently analyze and compare the different beep power spectrum to various different sounds. In order to avoid the effect of the amplitude (which changes to different requirement, even for the beep even), I want to use the standard power spectrum or spectrum of amplitude standardized by deviding the power of each frequency components of total power of the sound signal at this time. So, how can I achieve this in labview?
Thanks in advance
What is the data type? If it is an array, you can just divide by the sum of the powers. This value can be designated independently, or you can just divide by the sum of all elements in the array (use Add the elements of the array).
Tags: NI Software
Similar Questions
-
How can I get the digital power meter?
How can I get the digital power meter?
I use a method similar to the example below to measure the market factor using the inputs of a multifunction data acquisition meter. If the duty cycle is 0% or 100% for a given period, DAQ reading times out and returns an error. In this case, I would get the digital state of the counter of entry so I can put as cycle to 0% or 100%. I want to do it without knowing the digital port and line the entrance of counter... for example I would like to continue referencing DAQ/ctrX since I already have this information.
The application uses an M series: PXI-6229 DAQ and LabVIEW 2011 to make a system customized for VeriStand.
https://decibel.NI.com/content/docs/doc-12396
For the moment I wired the block diagram to add a case structure to check the meter ID and string constants to set the identifier of digital input, as they share the physical connection. As much as I can say that makes the specific code for the PXI-6229 (or any DAQ with only two counters that share connections with p2.1 and p) 1.4
I have attached the VI sub.
When the device is used with a different data acquisition, I can add the connection and/or separate control. Looks like at least one will be necessary given that the meter can only detect the edges... I think it was the piece of information I needed.
Thanks for your help!
-
How to show the output of the signalexpress power spectrum in data dashboard
Hey guys.
I made a program that collect analog data from two sensors in vibration, and then I use the signalexpress power spectrum to get in the frequency domain.
I would like to show the signals and the FFT in dashboard of data.
It is not possible to display the data directly because the XY graph in data dashboard supports only the two figures on the right cluster table?
Is it possible to convert data from the spectrum of power signalexpress table of cluster of two numeric values?
Or any other ideas would be appreciated
-
How to get the computer out of safe mode of power
How to get the computer out of safe mode of power
Hello jeffg56,
I understand that you want to leave safe mode, follow the steps below:
Exit Safe Mode:
Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.
On the general tab of the System Configuration window, select Normal startup, and then click OK.
I hope this has been helpful, please let me know if you need more help.
Thank you
-
How to get the list of RDM?
Hi all
In our environment both of RDM is presented to different virtual machines in physical compatibility mode. It was very difficult for me to keep track
Could you get it someone please let me know, how to get the list of the RDM presented to ESXI 5.0 host?
Thank you!
Ravindra Reddy
Thank you... A P... for your response tools RV is the right tool, but I wanted to naa number of LUNS as well.
After 2 hours, I had below power CLI command to get the list of the virtual machine.
PowerCLI C:\ > Get - VM | Get-hard drive - DiskType "RawPhysical", "RawVirtual" | Select name, Parent, ScsiCanonicalName, DiskType | FL | Out-file C:\RDMlist.xlx
Thank you!
-
How to get the path of the vmdk to a VM stop file?
Hi guys,.
How to get the path of the vmdk to a VM stop file in ESX Server via the VIX API?
I try to get it via the VixVM_ReadVariable() function. but it seems that this function requires that the virtual machine is power on.
I don't want to go the virtual machine started, I just want to know if I can get the path of the vmdk file when a virtual machine is power off.
Thanks in advance.
Sorry, I don't have any samples.
However, if you look at the layoutEx of the managed object VirtualMachine field, you will see that the VirtualMachineFileLayoutEx data object has a field "files" which should contain the paths of affected files.
I hope that it should be able to help get started.
-
How to get the value of PMT in oracle?
Hi all
I need to calculate the value of the PMT
There is the Excel PMT function == > PMT (rate, nPer, PV, (FV), (TYPE))
I have to calculate using pl/sql.
Can any body help how to get the value of PMT in PL/SQL?
Thanks for your help.
Kind regards
IwantoThere is no Oracle built-in function to calculate the payments, but the formula is easy to find. If you look at using Excel PV function, you should find the formula that excel uses to calculate. You can rearrange the calculation in terms of payment. If FV and TYPE are 0, then the calculation is
PV*rate*power((1+rate),nPer)/(power((1+rate),nPer) - 1)
You don't need really PL/SQL to do this.
Kind regards
Bob -
How to get the values based on the most recent date
Oracle Version 8i
How to get the new_value based on the most recent date
SELECT max (MODIFIED_ON), the Group LOG_ITEM_CHARACTERISTICS by MODIFIED_ON new_value - does not
Please, someone help me
CREATE TABLE LOG_ITEM_CHARACTERISTICS ( CHAR_LOG_ID NUMBER(10) NOT NULL, PIRM_ID VARCHAR2(8) NOT NULL, CONSTANT_FLAG VARCHAR2(1), CHARACTERISTIC_NAME VARCHAR2(25) NOT NULL, TYPE_NAME VARCHAR2(10) NOT NULL, NEW_VALUE VARCHAR2(3000), UOM VARCHAR2(10), MODIFIED_BY VARCHAR2(30), MODIFIED_ON DATE ) SET DEFINE OFF; Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (187376, '0307490N', 'N', 'OUTPUT CURRENT', 'PS2030/WVL', '1', 'AMPS', 'EMPXD88', TO_DATE('10/25/1999 00:00:00', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (187377, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMPXD88', TO_DATE('09/22/1998 00:00:00', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (187378, '0307490N', 'N', 'OUTPUT CURRENT', 'PS2030/WVL', '0', 'AMPS', 'EMDXB88', TO_DATE('09/22/1998 00:00:00', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (187384, '0307490N', 'N', 'OUTPUT CURRENT', 'PS2030/WVL', '2', 'AMPS', 'EMAXC29', TO_DATE('11/10/2000 00:00:00', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (187385, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55.1', 'VOLTS', 'EMAXC29', TO_DATE('10/19/2001 00:00:00', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_ON) Values (2400742, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '2', 'AMPS', TO_DATE('10/19/2001 00:00:00', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (574093, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '2', 'AMPS', 'EMCTH88', TO_DATE('12/13/2002 11:55:16', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (574094, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMCTH88', TO_DATE('12/13/2002 11:55:16', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (3131486, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '6', 'AMPS', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (3131487, '0307490N', 'N', 'LAST MEASURED DATE', 'PS2030/WVL', '16-12-04', 'DD/MM/YY', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON) Values (3131488, '0307490N', 'Y', 'POWER SUPPLY', 'PS2030/WVL', 'ESSENTIAL', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (3131489, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (4759086, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '6', 'AMPS', 'EMRCT88', TO_DATE('11/15/2007 14:33:03', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (4759087, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMRCT88', TO_DATE('11/15/2007 14:33:03', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (4759088, '0307490N', 'N', 'LAST MEASURED DATE', 'PS2030/WVL', '14/11/07', 'DD/MM/YY', 'EMRCT88', TO_DATE('11/15/2007 14:33:03', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (6646012, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '5', 'AMPS', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON) Values (6646013, '0307490N', 'Y', 'BATT TEST SET AT 3M', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON) Values (6646014, '0307490N', 'Y', 'CAP ALARM INHIBITED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (6646015, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55', 'VOLTS', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON) Values (6646016, '0307490N', 'Y', 'YR ROUTINES REQUIRED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON) Values (6646057, '0307490N', 'Y', 'BATT TEST SET AT 3M', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 13:03:18', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON) Values (6646058, '0307490N', 'Y', 'CAP ALARM INHIBITED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 13:03:18', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON) Values (6646059, '0307490N', 'Y', 'YR ROUTINES REQUIRED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 13:03:18', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (6648577, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '6', 'AMPS', 'EMPXD88', TO_DATE('01/07/2011 13:35:45', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (6648578, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55', 'VOLTS', 'EMPXD88', TO_DATE('01/07/2011 13:35:45', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON) Values (6648579, '0307490N', 'Y', 'YR ROUTINES REQUIRED', 'PS2030/WVL', 'NULL', 'EMPXD88', TO_DATE('01/07/2011 13:35:45', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON) Values (6648580, '0307490N', 'Y', 'BATT TEST SET AT 3M', 'PS2030/WVL', 'NULL', 'EMPXD88', TO_DATE('01/07/2011 13:36:00', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON) Values (6648581, '0307490N', 'Y', 'CAP ALARM INHIBITED', 'PS2030/WVL', 'NULL', 'EMPXD88', TO_DATE('01/07/2011 13:36:10', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (6648634, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '5', 'AMPS', 'EMPXD88', TO_DATE('01/07/2011 13:51:06', 'MM/DD/YYYY HH24:MI:SS')); Insert into LOG_ITEM_CHARACTERISTICS (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON) Values (6648635, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55', 'VOLTS', 'EMPXD88', TO_DATE('01/07/2011 13:51:06', 'MM/DD/YYYY HH24:MI:SS')); COMMIT;
user4587979 wrote:
Hi FrankYes, but I had more than 2 tables with item_characteristics, type_characteristics
If there are other tables involved, then CREATE TABLE and INSERT statements for them (for the relevant columns only). You must not post a lot of examples of data; usually just a couple of lines per table is enough to show the problem.
Also post the results desired from these data.What I try to do is, I'm comparing new_value in log_item_characteristics (whichever is most recent) with CHR_VALUE in the item_characteristics and the needs of different output values
I am trying to query is not giving desired out put
Point out some places where the output is wrong and explain how you get good results in these places, using specific examples from the data sample.
select lic.PIRM_ID, ic.CHR_ID, lic.CHARACTERISTIC_NAME, lic.TYPE_NAME, ic.CHR_VALUE, lic.NEW_VALUE, lic.MODIFIED_BY, lic.MODIFIED_ON, ic.CREATED_BY, ic.CREATED_ON,ic.MODIFIED_BY, ic.MODIFIED_ON from log_item_characteristics lic, item_characteristics ic,type_characteristics tc where lic.TYPE_NAME=tc.TYPE_NAME and lic.CHARACTERISTIC_NAME=tc.CHR_NAME and lic.PIRM_ID=ic.PIRM_ID and tc.CHR_ID=ic.CHR_ID and ic.CHR_VALUE <> lic.NEW_VALUE and lic.pirm_id in ('0307490N','0307521C') order by lic.pirm_id
Thank you; It is useful to see the existing query. Really, you have to format your code.
Please can you help me
What you've posted so far is like saying "I'm going 200 meters to the North, and then 500 meters East, but I'm not getting where I want to go." I would have a better chance to help you if you said, 'I'm out of my house, at 100, Elm Street and try to get to the supermarket at Broadway 279. I'm going 200 meters to the North... ', or, even better. "I want to buy a newspaper and some orange juice, so I thought I'd go to a convenience store. I start at my house, at 100, Elm Street... »
Always post some examples of data (CREATE TABLE and INSERT statements, as you did in your first post) and the desired results from these data. Explain how you get these results from these data. -
How to get the text have the same effect as the video?
Hello
For the first time post here, but I wonder how to get the text of the titles have the same effect as the video behind her.
For my video, I use 'bad tv' and other effects such as Gaussian that obviously changes the appearance of video, creating the look of VHS. However, I then inserted text via the title, but it normally appears. How can I make this text have the same effects as the video behind it?
A friend told me I might need to add text to the video first, then do the effects, I have not tried, but wonder if there is an easier way, as this would require me to restart.
EDIT: That's what I'm looking for. https://youtu.be/7_2PHQI89dI?t=24s The text has the same effect as the video.
Thank you
One way is to create a clip made up based on the title and the original clip. Then apply the effect.
Another way is to use an adjustment layer.
Good luck.
Russ
-
How to get the podcast of the website on the phone
I was told to put that feed into the PODCASTING app on your iOS device.
The site in question is https://randirhodes.com/how-to-get-the-podcast/
I paid for a premium podcast, now how o I get this podcast to appear on my iphone 6 s more in the podcast app?
Podcasts > select my Podcasts > press the '+' > Add Podcast > paste the URL that you got on the site.
-
How to get the video intro off my google home screen I already saw it, where is the firefox logo used to be. I started with the last update that I rebooted.
Hello
to change the homepage when opening firefox-press 'Alt' and click on tools-> Options.Main menu, you can change the URL.
If the problem persists, you can follow these simple steps:
Enter about: config in the address bar and press ENTER. Accept the message of 'dragons' to see the Advanced preferences screen. Use the above search box to enter the below pref.
You can assign an empty string to stop your Firefox to retrieve "extracts" and brandLogo changes the browser.aboutHomeSnippets.updateUrl pref. Right-click this pref and select Edit then clear the value as pref in the box that appears, and then click OK. Who will also disable "snippets" that appear under the container of the research on the default home page.
Then you must open the folder of your profile, via help > Troubleshooting Information > profile folder > > button view folder. Then close Firefox. Your profile file open with Firefox closed (Firefox '3-bar' menu key > exit/Quit), wait or two minutes, then remove the storage\moz-safe-about + home folder in the Firefox profile folder to remove the brandLogo and stored in IndexedDB code snippets to make Firefox use the default brandLogo and a defined default code snippet.
If you later change your mind about these changes, you can reset the pref browser.aboutHomeSnippets.updateUrl via the context menu and Reset allows to retrieve the default value using the storage\moz-chest-fort-about + home folder again.
-
Heard speak adds the new on Fire Fox. Where and how to get the new Firefox add - one of who is spying on us. Please mail to maheshubhayakar at rediffmail.com
edited by email address - moderator
It is helpful if you provide a link to the article you were reading.
-
Re: How to get the Tempo to work properly?
Hello
I have problems with the service of Tempo.
I don't get updates via this application (all the settings of this application are accurate, i.e. "full control"). I know this because there are updates available online to my laptop via the pilot site of toshiba.
When I installed first Tempo, updates for about a month, I received, and then all of a sudden, no update came through. My firewall is blocking either of this application.
I tried to reinstall the application, but no change in the situation.
Does anyone know if ALL updates are available via the website of driver toshiba out tempo? Because, in the month that this service worked, I got an update of the bios, but I recently saw a bios update online and Tempo has not always reports that it is available.
Any ideas on how to get the Tempo to work properly?
Thank you.
I saw in your other thread you have installed SP1 on your Vista laptop.
There may be some compatibility problems between SP1 and TempoAnd Yes, as far as I know Tempo bring all available updates!
-
I rolled again Firefox 4.0 to 3.6 and now my navigation bar still looks like instead of 3.6 4.0 how to get the old layout back?
The fastest way is to use the option 'Restore the default toolbar set' as shown here - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing
-
How to get the physical credit iTunes gift card?
How to get the physical gift card iTunes on your iTunes store account balance?
- You cannot buy an iTunes gift with in-store credit.
See the link below to buy physical gift cards for iTunes.
Maybe you are looking for
-
good ways to clean the ibook G4 keyboard
What is the best way to clean an ibook G4 keyboard?
-
Where are the repairers of international limited in the reunion island?
My 9 - month, Kirabook (PSU7FA00H00K touchscreen 8.1 Win) is some sort of major failure. After a few flashes of white and return to the normal display, the screen now everything between colors, white, black, red, green, blue (repeating constantly). I
-
Close sequence TestStand programmatically
Hello I'm something of a novice TestStand, so my apologies if this simple question. Is it possible to programmatically close a TestStand sequence at the end, or I can give her a statement in its final stage to close itself. I environmental TestStand
-
What Version of SATA has the motherboard ASUS M2N68-(Narra2)?
Hello I want to improve my HP a6150de with a SSD desktop PC.I'm not in a position to know what SATA version (1, 2 or 3 GB of a.k. 1.5/3.0 or 6.0) comes with my ASUS M2N68 - Map (Narra2) mother. I have tried several hardware analysis tools, also check
-
RTE installed but the PC doesn't recognize don't not expansion .vi.
I'm trying to update an old LV application that will be deployed on multiple computers. The updates are completed, but I have problems with the installation. Updates have been tested out on a computer that had LV 7.1 (the original version) and BT 8