How to get the system on disk vs download upgrade

Similar Questions

• Re: How to get the system running again on my laptop satellite

  Everything ok and ongoing run (Vista 32 bit), also installing the update for Intel chipset seemed to agree,
  but subsequently requested reboot does not work... and the horror began :(

  No matter if the hard drive is installed or not, following events occur after passing on: hhd light indicates activity, also for disk hard desinstallion (!), in the possible bios by F2, dvd lamp is lit and portable crashes.

  What has gone wrong? How can I get the system running again?

  TIA

  The whole story is a bit confusing for me. I put t know how you came the idea to update the driver chipset if everything was OK. Vista is old BONES and it is unclear to me that Toshiba has offered some updates of the chipset.

  What is confusing to me is the fact that you can not enter the BIOS settings.

  When you start your laptop you see Toshiba welcome screen and the grey line down with info press F2 to enter the establishment or F12...?

  What will happen after that? Display stays black or what?
  What happens when you press F2, F8 or F12? Everything works? Can enter you in menu start or advanced startup options?

  Try please start your laptop with the recovery DVD and press C repeatedly on startup laptop. Check if the installation of recovery will recognize.
  Post please a little detailed report.

• How to get the system screen resolution

  Hi all

  
  I'm developing a flex application in adobe flex3. When I draw components in the design area flex builder is set to "Fit to window". so application are displayed on my monitor(17") correctly, but when I try to run the same application to another computer or a laptop of 14" display screen is different than the screen of the monitor is short, I need to scroll down to see the full page. My question is how can I make sure that the application should search for uniform on different platform/different browsers and different monitors (regardless of the dimensions of the monitor).

  And how can get the screen resolution of system during execution?

  
  Thanks for all the help and support.

  Look in flash.system.capabilities.  Note that any application based on a browser usually does not control how big be.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• How to get the system time?

  I want to get the system of unit of bb and information of AM/PM time. Can someone give me some code examples? Thanks in advance.

  Time system is stored as a number of milliseconds from an arbitrary date s in the past. You get this time using System.currentTimeMillis)

  You can extract the various components of the agenda of the time using the Calendar class.

  You can also create a SimpleDateFormat object to format this time for display.

• How to get the system tray at the bottom of the monitor

  I found that the system tray icons had moved to the right side of the monitor. How do I get back them down

  Hello

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

• Satellite P105-S6197: how to use the system recovery disk

  Greetings,

  I have a P105-S6197 and I followed the instructions on the recovery disk,

  1. Insert the disk or disk #1 in the drive.
  2. turn on your computer while holding down the button 'C' (release key 'C' when the display shows "Toshiba")

  but these instructions do not work the computer starts just to the top normally and do never runs the disk.

  Is there another way to get the disc to run so that I can completely reformat my computer to the way it was when it was first purchased.

  Thanks, Edana

  I can provide the same information as codes for:

  There are different options to allow booting from the CD/DVD drive.

  One is the C key (you have to press several times) immediately after that the laptop has been powered.

  The second possibility could be the F12 key.
  It would start on the screen menu and then you may choose the CD/DVD drive as a boot device.

  Last but not least, you can change the boot order in the BIOS.
  The reader of CD/DVD (ODD) in the first place and the gaming laptop should boot from the inserted CD, bootable automatically.

  Concerning

• How to get the system during the report generation time?

  Hello
  I develop a model in which I am required to display the data of the current year only. Is there a method by which I can get time system (from which I extracted the year)?

  Hello

  If your model is rtf you can add a template field "Date" with the "yyyy" format mask, or add a form field with and same format mask as precedent.

  Kind regards
  Colectionaru

• How to get the system user-defined font

  Hi all

  I'm looking for a way to get the font defined by the user in the features of the device.

  My requirment is to check if the user sets the size of the police over 11 or not.

  If the user sets above 11, say to 13 or 14, in my application, I need to change it to 11 vice versa.

  But the application must support the change in size of the font up to 11.

  Please help me through this, if someone has an idea.

  Thank you

  Abhishek

  http://www.BlackBerry.com/developers/docs/6.0.0api/NET/rim/device/API/UI/FontManager.html#setApplica...

• How to get the Task Manager recognize image after upgrade to dual-core

  I have improved the fron of processor Intel Pentium G3240T (Haswell) 2.7 GHz Dual - Core of Intel Core i5 - 4570T (Haswell) 2.9 GHz Quad Core. HP Pavilion 23-g120t CTO of all-in-One desktop PC is running windows 8.1.

  Devic Manager shows 4 core, but the Task Manager does not work.

  There need a configuration file updated to benefit for the quad core?

  How can I get the Manager tasks recognize four hearts?

  I restored the system with recovery CD and tried the msconfig by selecting 4 processors with no luck.

  Here is the link to the card mother deatiling all taken CPU model supported.

  HP Pavilion 23-g120t CTO all-in-One desktop PC

  http://support.HP.com/us-en/document/c04014873

  Thank you!

  Looks like that the plateau of the ony processor version supports two hearts. Thank you!

• How to get the Windows 7 USB/DVD download tool to recognize a file bootsect on my XP 32 bit machine, if I bought Windows 7 64 bit?

  Title says it all. I scoured the internet for an answer.

  I bought Windows 7 Professional Upgrade with the discount for students. I downloaded the file .iso image 64 bit on my account "Downloads + product keys." I also downloaded Windows 7 USB/DVD download tool to make a USB bootable for Windows 7. I ran the utility and everything worked well, but at the end of step 4, I received the message "files copied successfully. However, we were able to run bootsect to make the USB drive bootable. If you need help bootsect... blah blah blah. »

  I went looking for answers and I found the troubleshooting for the show here: http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool#ms_help_topics_at0
  Next to Windows 7, step 3 says "is there an"additional download options"drop-down list."
  I had that day, but then this:
  Step 4: "in the drop-down menu, select"32-bit ISO." »
  This is not possible, because I bought the 64 bit version of Windows 7. All I see are the 64-bit .iso and .exe.
  I tried searching through Microsoft answers and found that many other people had this problem. I tried all of the suggestions for workarounds in this thread. http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/problem-using-Win7-usbdvd-download-tool-concerning/37eadf15-85DD-4e56-A89C-fa0a3339b92e
  The only solution I have tried was downloading the file bootsect from one source other than Microsoft.
  Is it seriously the only way to make it work? To download a BOOTSECT FILE from an UNTRUSTED SOURCE? Come on, Microsoft.

  If you purchased Windows 7 since the MS Store:

  When you create a bootable USB device, I get an error on bootsect
  To make the USB bootable, you must run a tool called bootsect.exe. In some cases, this tool must be downloaded from your Microsoft Store account. This can happen if you try to create a USB bootable 64-bit from 32-bit version of Windows. To download bootsect:

  1. Sign in to your Microsoft Store account to view your purchase history
  2. Search for your purchase of Windows 7.
  3. Next to Windows 7, there is a drop-down list "additional download options.
  4. In the drop-down menu, select "32-bit ISO."
  5. Right-click on the link and then save the bootsect.exe file to the location where you installed the Windows 7 USB/DVD Download Tool (for example C:\Users\username\AppData\Local\Apps\Windows 7 USB DVD Download Tool).
  6. Once the file has been saved, return to the Windows 7 USB/DVD Download tool to create your bootable USB device.

  If you didn't buy Windows 7 since the MS Store:

  Follow these instructions to work around the bootsect error:

  a. download and install the Windows 7 USB/DVD Download Tool program, as described on theMicrosoft Store website.

  b. download a working version of 32-bit bootsect.exe . Here is a link to the 32 bit bootsect.exe:

  bootsect7600x86.zip
  From: http://www.sevenforums.com/installation-setup/54443-32-bit-bootsect.html

  c. Once downloaded, copy the BootSect.exe file in the same folder that contains the file ofWindows7-USB-DVD-Download - Tool.exe installed. This file in Windows Vista's default installation directory isC:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\ (you need to look in XP)

  d. application of the Windows 7 USB/DVD download tool as described on theMicrosoft Store website. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Satellite A500 PSAM3A - how to get the HARD market under Vista 64-bit disk Protection System

  Hello

  I would like to know how to get the HARD drive Protection system up and running under Vista Home Premium 64 bit operating system. I downloaded the program 64 bit of Toshiba for this program and install it I tried but doesn't seem to work. I have uninstalled and try to install the program, but still does not work.

  Unable to find the problem, why it won't work. If anyone knows how to solve this problem it would be a great
  help for me. If anyone knows how to solve this problem please answer me as soon as possible.

  Thank you for your time.

  Kind regards
  Nigel.

  Hello!

  What you downloaded exactly on the Toshiba site?

  As written Akuma you must install first added value Package you will find also on the Toshiba site. Check this box!

  An interesting thing: it does not work if you are using the preinstalled operating system? It should have everything installed for your laptop.

  Good bye

• Re: Satellite M100-164 - how to get the recovery disk?

  Hi, I have a used Satellite M100-164. (short only model no psma0e)

  Its a M100 changed for the Middle East market as well far as I can tell its basically the same as the European models of M100, except with a smaller hard drive.

  I bought it in a store of play (Computer Exchange in London), but it did not come with a recovery disk.

  Also, I was a little too active pro removing unwanted software of the machine, so I have not installed the Toshiba tools that would be able to create a recovery disk.

  Now I need one because I want to install a bigger hard drive and then re - build the operating system (which is XP)

  * So my question is, where and how do I get a recovery for this notebook drive? *

  I tried to use https://backupmedia.toshiba.eu, but it did not work because the serial number was not recognized (probably because it is a region of the Middle East series no)

  is there another way to get the Toshiba recovery disks? I'm happy to pay a little for one.

  Hello

  In most cases it is possible to get the EPA recovery disc in your country.
  But this is not always possible if the laptop model is too old or abandoned.

  Therefore, get in touch with the ASP guy and ask for more details.
  Maybe you are a lucky man and could get this disc.

  If you will not get this disc, you will need to install the OS by using the MS XP disk.
  Pilots must be placed on the page of Toshiba Europe!

  See you soon

• How to get the Subvi (the virtual path is in .exe) reference in Run Time System

  Hello world

  The problem is how to get the reference of the Sub - VI in run time system, when the Subvi is in .exe after construction.

  More details:

  Top of page vi called the Subvi dynamically, so that the Subvi is always included, and the source object is the application.exe.

  After the above configuration, the Sub - VI will be the application.exe. For example, the path of Subvi est...\application.exe\SubVI.vi

  So, how to get the reference of the Subvi in Run Time System?

  I can't do it when you use 'open reference VI' with le...\application.exe\SubVI.vi path in the run time system.

  In fact, I can create a file to include the Subvi, rather than build the Subvi in application.exe, then I can get the convenintly reference. But this isn't my favourate average.

  Thank you

  chenyin

  That is the problem. Call a Subvi dynamic means users could change, but it is also very attractive.

  The dynamic call should be used in a user control, but some parade can avoid problems.

  It depends on why you use dynamic calls...-online 2 main ways:

  -Dynamic call are used to maintain a scalable framework for the code without acting on the executable file-online a single VI distribution managed by the administrator/developer

  -Dynamic call are used to provide a collection of "external" characteristic that could be enriched by the administrator/developer. For example, you provide your customers a set of selectable custom signal filters in the executable.

  In 2 cases, you are only able to assess the skills of the users to know if there is a risk of damage, if there is a change.

  So to stay only master a parade might be to provide dynamic VI without a schema, but with the problem of maintenance, since no in-place editing and more attention to manage distribution.

  Another way is to hide the actual distribution to user-online call dynamic VI but it without name as *.vi but others (a repellent name as system of OS name ) or simply without extension in order to attract not user... but that's debatable...

  Another more difficult but more secure method is to create a consistency check before your routine (version, user, modified date,...)

• How to get the alert or deducted to the admin if the user AD installation of application in the domain system?

  How to get the alert or deducted to the admin if the user AD installation of application in the domain system?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/winserverDS

  It will be useful.

• How to get the hour format system?

  Hi all

  How to get the hour format system, I mean what format 24 / 12 system uses?

  Looks like the CalendarSettings class is perhaps the official way: https://developer.blackberry.com/native/reference/cascades/bb__pim__calendar__calendarsettings.html#...