How to get the updated values of the loops while they are running

Similar Questions

• does anyone know how to number the photos when they are exported so someone can choose the peak of number

  Anyone know how to number the photos when they are exported from LR, so someone can choose the photo they like with a number

  Sorry took with the last answer.

  More simple form used something like-Sequence_Filename number suffix

  If an image as _ABC0987.nef will become 0001_0987.nef and 0002_0988.nef, etc.

  Ask your customer to give you the full file name. The suffix indicates the original file.

  (I hope that you only need to search in a folder and do not have a bunch of images named the same that would cause problems!)

• How to get the query execution time without running...?

  Hello
  
  I had one condition... as follows...
  I had 3 sql statements. I need to run only sql what runtime is very less.
  
  Can someone help me, how to get the time query and run this query without using explain plan... ?
  
  Thank you
  Rajesh

  I can't think in any way at all to get the query execution time without running the query.

  You might get an estimate ( approximation ) If you are using explain plan.

  But you have governed to explain plan for a reason, so I can't help you.
  Why you do not want to use don't explain plan?

• How to treat the points when they are just above the other?

  I was fiddling around with the trace function and create outlines of text. For some reason any sometimes I'll end with two points that overlap each other and no way to get rid of one or the other. How the hell can I clean this up? I know I can do something like simplify to reduce points on an object, but it goes beyond the necessary adjustment to remove one troubling point.

  Even when you zoom in as far as possible I can't to select one point on the other because they are in the same place.

  Also if you want to do this manually the negative of anchor point tool, which is part of the toolset of feather pen icon with the sign less will allow you to remove the top. Also, if you click on the anchor point with the direct Selection tool, and then press DELETE it should remove just an anchor.

  But Concatenate could do this as a difficulty.

  you will find it useful.

• How to get the ICS in my area

  Hi I have updated ics manually to my xperia mini

  the number of TR are different, mine is 1248-9517 and I've updated so is 1249-8388

  My prev GB is 64band and now it's 72 is any problem?

  and I fixed my ics with sus but repairing 1249-8388only

  is this a problem are not?

  Donwgrade a.42 and he roots

  See how downgrde here

  Installation of root explore

  He keys to access the system > mount R/W > press and hold on the build prop > open in the text editor > write 1249-7721 in the following categories

  RO. Product.Name

  RO. Build.Fingerprint

  RO. SEMC.version.cust

  For example if it is to show

  RO. Product.Name = ST15i_1249-8388

  Then write

  RO. Product.Name = ST15i_1249-7721

• How to get the largest possible document area limits?

  Hello!

  I'm trying to improve the treatment of GuideGuide to guides to Illustrator. So far I have not found a way integrated to add guides, so I draw a path, and then set its value true guides. While this works, it has the disadvantage that I need to understand the location of the limit of the guides in addition to the place where I want to place.

  For my example, I use a horizontal guide.

  Looking at how Illustrator handles things, it seems to add guides within the max and max left right of the document. Remember, it is possible to place objects even further beyond these limits, but they are the limits of Illustrator watch visually. This is the behavior that I am trying to imitate.

  So far I have not found a scripted way to extract these limits of Illustrator, but my test has shown so far that the width and height max of document is 16383pts. You would think it would be as simple as placing a border guide to 0 and 16383, but the origin of the document seems to be at the Center. One would then think that (16383/2) *-1 would be the edge of the document, but this also does not turn to be true. So far, in my tests at the origin of the document is fluid, sometimes in the Middle, sometimes offbeat. I tried incorporating the pageOrigin document, but also proved not to be useful. I'm even taking into account the differences in plan of work/paper Guide and have still found no obvious solution.

  Am I missing some obvious details that can be used to pull these values from Illustrator? This looks like something that would be relatively easy to do.

  

  Hi Silly-V and cameronmcefee,

  try this excerpt:

  // RectangleMaxPasteboardBounds.jsx
  // ArtboardMaxPasteboard2.jsx
  // try to create a rectangle with the max. pasteboard bounds
  // regards pixxxelschubser Sept. 2016
  
  if (app.activeDocument) {
      var aDoc = app.activeDocument;
      var ABR = aDoc.artboards[0].artboardRect;
      var total = Math.pow (2, 14)-1;
      var topLeft = Math.ceil (-total/2);
  
      var maxAB = new Array();
      maxAB.centerX = (ABR[2].toFixed(5)-ABR[0].toFixed(5))/2;
      maxAB.centerY = (ABR[3].toFixed(5)-ABR[1].toFixed(5))/2;
      var xSubstr = (maxAB.centerX < 0) ? Math.floor(maxAB.centerX) : Math.ceil(maxAB.centerX);
      var ySubstr = (maxAB.centerY < 0) ? Math.floor(maxAB.centerY) : Math.ceil(maxAB.centerY);
      maxAB[0] = topLeft+xSubstr;
      maxAB[1] = -topLeft+ySubstr;
      var Rect = aDoc.pathItems.rectangle(maxAB[1], maxAB[0], total, total, false);
      Rect.stroked = false;
      Rect.filled = false;
      Rect.selected = true;
      alert("Rectangle created");
      } else { alert ("no open document"); }
  

  Have fun

• How to get the output (!) during procedure-run / RAS dbms_output.put_line

  Hello again,
  
  during a migration script written in plsql, we print several status information on-screen using dbms_output.put_line.
  
  for your information:
  
  the script commits each lines x during a massive update. A commit is carried out whenever I want to have the output: Timestamp + number of lines committed themselves.
  
  Unfortunately the output by dbms_output.put_line is emptied to sqldeveloper once the procedure is complete.
  So I have all the time after the migration is complete, but if possible I need the information when it is put into the stack of the dbms_output.
  Is it possible to flush the output while the process is still ongoing? Are the alternatives to dbms_output.put_line who could help?
  
  Oracle is 10.2.0.4
  
  Thank you very much
  Andreas
  
  Published by: Andreas s. the 11.03.2011 01:38

  Note:
  Messages sent using the DBMS_OUTPUT are not actually sent until full subprogramme of the shipment or the relaxation. > There is no mechanism to flush the output during execution of a procedure.

  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_output.htm

  you could just write your output to a table?

• How to use the extension and they are safe to use?

  Hello

  I intend to use firefox for iMac in order to get the benefits of extensions. Extensions that I use are the visited site speed measure. I am currently using gtmetrix for my site http://www.i-phony.com , I was told that it gives results from remote servers.

  My server is located in Saudi Arabia. Will be extensions of what the speed of the server measure be safe to use. And are they able to give an accurate reading of the place where I am?

  your support is much appreciated.

  Best regards

  Each addon at AMO avaible were examined and is safe to use.

• How to get the 'Cup-calendar-assist"you run again?

  Hello guys,.

  When you work with PP I must have pressed a wrong button and now without help of timing there are longer. My bigggest problem, is that I don't know even what his name really is, so I'm going to explain to you what I mean:

  Whenever I've shortened / moved a clip in my project there was some assistens to synchronize beginnings / endings / cut-outs used clips. -You know, when you get close enough to the point, the race jumps automatically.

  Any of you know how I can activate it again? It would speed up my Cup so still...

  If the answer is already given somewhere I apologize deeply but: as I said I don't even know what to look for and so I did not find a happy even if I tried.

  My specs:

  OS: Win 7

  P. c.: 2015.3

  Thanks in advance

  Victor

  Hi Victor,

  Is the component feature snap-in that you talk too much.

  The shortcut key because it is "S" and the icon is available in the right timeline below the timecode (the magnet icon).

  Vinay

• How to get the malware removal software will run after your infected.

  Malware in the form of XP repair tool has infected my system. I can not get any form of antivirus software or withdrawal from work. He starts, but he is quickly terminated and nothing I've tried has worked. I used the Malware Bytes, Rkill and Hitman Pro to try to get something to clean out the infection. Any suggestions?

  Hello

  Have you read and follow this? There are still manual methods.

  Remove Windows XP Repair (Uninstall Guide)<-- read="" this="" link="" for="" removal="">
  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

  Have you tried to rename (the ladies of malware) programs you need to run a .COM extension?

• How to get the logical processing Page to run?

  I'm a newbie struggling to overcome the learning curve. I created a very simple page that consists of an element (which do not refer to a database object) and a button. After the user enters a value and click on the button, I want to a PL/SQL code block always fire. I created a new anonymous PL/SQL block in the section of the process. See hierarchy of Application Builder below.
  
  The page definition
  Page processing
  Treatment
  Process
  
  The code is very simple.
  
  Start
  HTP.p ("in the custom code. The htp.p message');
  dbms_output.put_line (' in the custom code.) Dbms_output message');
  insert into PT_ERR_LOG (RUN_UNIT_ACTVTY_TXT) values ('in the custom code.");
  end;
  
  It was designed simply to let me know that the code is accessed. When I run the page, however, I'm not either of the messages from the code or y at - it a line written in PT_ERR_LOG (I created this table).
  
  The question is: "why isn't the enforcement code?
  
  In the area of process Point, to the point of process article is set to "On submit - after calculations" and Validations
  The enforcement process is defined on ' once per visit or when Reset.
  
  In the region of Conditions, Type of Condition is "point value / column in Expression 1 is NOT NULL.
  The value of Expression1 is: P6_PGNT_ID, which is the name of the lonely field on the page.
  
  I tried different combinations of values of the Apex in and around the page in the Page processing. What I am doing wrong?
  
  Thank you
  Kim

  In the Conditions region, Condition Type is set to "Value of Item / Column In Expression 1 Is NOT NULL".
  The value of Expression1 is :P6_PGNT_ID, which is the name of the lone field on the page.
  

  That's the problem. The value must not be P6_PGNT_ID: P6_PGNT_ID (remove the colon)

  P.S. Please configure a user name other than 952822.

  Robert
  http://apexjscss.blogspot.com

• How to get the peak value

  Can I know how to get the 2 peak values v1 and v2 and 2 duration times t1 t2.

  Since there is a small amplitude noise, difficult to use the Max simplely.

  May need to use a filter such as wavelets or TREE to Denoise it first. Can I know how to use, any Toolbox in labview. How do the curve smooth first.

  Thank you.

  I can't watch your vi now (I'm at work), but if your signals are long enough, you might consider a median filter.  You can set the number of points before and after use.  I found that it is useful for some smoothing problems (not all).

• How to get the value of a variant as a string

  I have an existing codebase, which transmits the values of the user interface to business logic as variants. I was prompted to connect all values passed in this way in a text file. I'm trying to figure out how to get the data as a string to a Variant value without having to deal on the type for the data descriptor. The flag variant the fact, so I think I can, too.

  

  Anyone know how?

  Thank you, all! I decided to use the XML approach:

  

• using PostDelayedCall how to get the value passed through void * callbackData?

  Can someone tell me how to get the data passed through void * callbackData?

  The following code, panel_ptr has the right address but still contains zero.

  void CVICALLBACK value_changed (void * callbackData)
  {
  int * panel_ptr;
   
  panel_ptr = callbackData;
  calculate_new_value (* panel_ptr);
  }

  int sign;

  Panel = 2;

  PostDelayedCall (value_changed & Panel, 0.2);

  The problem is using the callbackData parameter if it is a pointer, it must be a pointer to something which is still topical at the moment that the callback executes. That is to say, you cannot pass the pointer to a local variable in callbackData as when the callback executes the pointer is no longer valid. You can switch from its value, instead, in this way:

  ... SomeFunction)

  {

  int sign;

  ...

  Panel = 2;

  PostDelayedCall (value_changed, (void *) Panel, 0.2);

  ...

  }

  void CVICALLBACK value_changed (void * callbackData)
  {
  int panel_ptr;
   
  panel_ptr = (int) callbackData;

  calculate_new_value (panel_ptr);

  return;
  }

  There are many discussions on the forums on callbackData parameter that you might want to read.

• How to get the parameter values of a step type custom when I create file and adding a type of step seq

  I use lv 8.5 and teststand 4.0.

  I did a step type custom and recorded at the MyTypes.ini in pallets of type.

  I specified a default module by opening the properties of the custom step of *.ini type window, then I put some values of the parameters.

  T1) when I open teststand and I add the custom step type manaully in seq file, the labview module parameter values are represented.

  But, if to use file (create and add support prototype stage), the labview module parameter values has the default value.

  Using joint file, how to get the setting custom step type values I put in *.ini?

  Q2) each type of step are automatically by name through the use of LoadTypePaletteFilesEx. When I open teststand and I add the custom step type manaully in seq file, the module is loaded automatically. Inside the attachment, I use a prototype of charge and a fixed path where the module labview is to load the labview module.

  Can I load module automatically without using a prototype of charge or how can I get a dynamic path of type step?

  I solved Q1 for myself by using the mapping tab of the parameter within the configuration to the default module window.

  Everyone knows Q2?

  Thank you.