HOW TO GET TWO WAY AUDIO BETWEEN A PC AND A PROFILE C90 SYSTEM

I'm trying to connect my PC to two audio channels and take advance of the C90 65 "profile that I have.

I had the C90 RCA Audio Line In #2 to taking SPKR of the PC and work well to get audio to the profile via the C90 speakers.

Audio of any of the room of the Microphones connected to the C90 to the PC?

I have a cable connecting the Audio Line Out #2 (right) goes to the MIC on the PC socket, but it does not work.  I don't see any audio signal on the map of his local record settings?

I did successfully on other systems using a series MXP codec that is 3000, 6000 using catch RCA of VCS.

Also, what are the internal settings to ensure that turned off inside the C90 and the sound card on the PC?

I'm missing something simple, I'm sure.

Any help and or the drawing will be appreciated. ???

You would use TC Console to manipulate the audio routing in the codec.  However, I recommend a microphone routing to an output of speaker, as Wayne mentions that this may cause problems with the audio.  I routed the microphone input to the HDMI output once, and it makes the sound being transmitted to the dark side be distorted, don't know why, but I would test fully all possible scenarios when changing channels audio.

Tags: Cisco Support

Similar Questions

  • Windows XP mode - 7: how to get the Realtek Audio Drivers with GS Wavetable outside normal? Instead of RDP Audio driver!

    1. I upgraded my comp to Windows 7, Ultimate because I need to use many XP programs. What I've discovered, is the virtual XP Mode is not the same thing as XP regular and many programs do not run properly. Particularly theAudio out to lunch and MS GS Wavetable is not available in XP Mode.

    2 - I end up having to buy another XP-Professional and installed in the same notebook. I have to turn off the laptop restart and select the Windows 7 to XP operating system. All old programs work fine under XP.

    3 - I continued looking for a fix for the XP Audio Mode or virtual. Almost 2 years now, I can not find such a simple solution.

    4. today, I found something on the Microsoft RDP Audio driver. What is the reason? Anyone know?

    5. are there available MS drivers or resources?

    I'm not interested in the commercial programs or attempts to scan my computer. MS sold Windows 7 that can run XP so I think that Microsoft is responsible for fixing.

    Thanks in advance,

    VT

    Windows XP mode - 7: how to get the Realtek Audio Drivers with GS Wavetable outside normal? Instead of RDP Audio driver!

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Windows Virtual PC and XP Mode Forums.

    http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  • I keep getting "the trust relationship between this workstation and the primary domain failed" error windows 2008R2

    Hi all

    I appreciate your help. And I hope that this issue has been addressed previously, although I couldn't find any solution there.

    I manage a domain windows 2008 with 3 domain controllers. Recently my workstations continue to fall out of the field. I get "the trust relationship between this workstation and the primary domain failed" to many workstations.

    I know how to fix properly, use netdom.exe. But the mistakes keep coming back. I don't know where to look for the source of this error. A possible problem might be the time in any field is out of sync. But all my workstations synchronize with the domain controller with the primary domain controller role and seems to work correctly.

    Are there other sources, that I need to check? This is getting frustrating.

    Thank you much for the help.

    Sincerely,

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • How can I put a dashed between enrty line and page number of an index?

    I've successfully created an index with Indesign CC, but I can't seem to right align page numbers and get a dotted line between the entry and the page number. It doesn't seem to be an option for that. The menu of content table has a field "between entry and Page number", but I can't find an equivalent here.

    There is also a full stop after each page number. I don't know how it got there, but how do I get rid of this?

    You must change the paragraph style, you use with your texts to index. Go to the tabs tab and change the tab tab left justified right, Insert tab arrow to correct places on the rule of the tab and finally add a point to the head field. Then you need to return to your indexing settings and make sure that you separate the entries index and page number with tab...

    Paragraph Style settings:

    Indexing settings

  • My iphone6s display just broked. How to get a free display Exchange if repairs and Service coverage is still Active?

    My iphone screen just broked. How to get a free display Exchange if repairs and Service coverage is still Active?

    I found a few shops bestbuys and apple around me.

    Thank you very much!

    Jerry

    There is no exchange of free display.  You will pay is the AppleCare + fresh incident (if you bought AC +), or the elimination of guaranteed replacement costs / costs of replacing the screen.  Your best bet would be to visit the Apple store with a genius bar appointment.

    Make a Genius Bar reservation (or cancel an existing reservation)

    http://www.Apple.com/retail/Geniusbar/

    Log in using your Apple ID.

  • How to get back my data for the health and the watch Apps once I've restored my phone?

    How to get back my data for the health and the watch Apps once I've restored my phone?

    From the backup, you're going to be restoration.

    If you back up to iTunes, make sure that it is an encrypted backup.

  • How to get the film on the second screen and cut on normal?

    How to get the film on the second screen and cut on normal?

    iMovie 10 does not support using double screen, tou need to FCP to do.

    Geoff.

  • The knife tool develops a black line on the objects that I colored using the live paint bucket. How to get the tool knife to stop this and instead of being invisible?

    The knife tool develops a black line on the objects that I colored using the live paint bucket. How to get the tool knife to stop this and instead of being invisible?

    I understand that it is a live paint object you use.

    Try this:

  • How to get a cleaner audio (Dell M6300)?

    I have a dell M6300 I want to use for gigging jazz. I run Band-in-a-box and also some materials taken from wma lossless. In my home studio, I use BIAB to backings, with some audio recorded and added through Ableton live. I unload the finished tracks and identifies upward with Windows media player.

    I tried to use a Behringer UCA202:

    http://www.dolphinmusic.co.UK/page/shop/flypage/product_id/8522

    for the sound signal both a decent amp combo Marshal and also a much amp separated largest with 600w speakers. On both systems, there's a snap low residual level that seems to be related to the activity of the CPU.

    Thinking maybe the Behringer unit was at fault, I just bought a M-audio USB accelerated training:

    http://www.soundslive.co.UK/product.asp?ID=3773

    This gives exactly the same problem!

    I'm doing something wrong? Why is the output of these devices not cleaner? Anyone have any idea how to get the cleanest result?

    There's an outpt of tos-link (spdiff) on the Behringer device, which I tried to connect to a hi-fi system. That does not give a clean result. For gigging power amps don't usually have a spdif input. I could blow another 60 quid on a digital-to-analog gizmo to go in the power amp but its becoming of the rats nest and seems a way ott to do.

    Can someone enlighten me on the best way to get an output very clean sound of this portable expensive top-of-line? So far I am not impressed in this respect (although he flies for my graphics work)

    Thank you

    John.

    (published music digital forum)


  • How to make two mono audio tracks in a stereo pair?

    My clip video, brought in first CS6 of Final Cut Pro 5, the left regular and audio tracks right, but first, they are not related in a stereo pair. Thus the volume level must be set separately in each track.

    In Final Cut, I can convert two independent audio tracks in a pair of stero selecting tracks and then by going to the Edit menu > stereo pair.  I can't understand how to do this first.

    When two audio tracks are not related, the volume level must be set separately in each track that is slow. But after two tracks are linked in a stereo pair in Final Cut, or another track adjustment allows to set both, together. That's what I want to do now in first.

    So, how do two separate audio tracks in a stereo pair in first?

    Tom

    Welcome to the forum.

    Have you looked at the padding on the left and fill right Audio effects?

    They should get what you want, or almost. Now, the result will be stereo double mono and not true, but will be 2 channel, and that is, I believe, what you really want.

    Good luck

    Hunt

  • Can someone direct me to resources on how you get TWO esx servers to the same storage array?

    Hi all

    I use:

    2 x Compaq DL380 G2 with 5i

    cards controller 5300 AND attached to the base storage Bay

    STORAGEWORKS ENCLOSURE 4354R RM DOUBLE PORTS U3 (not yet pregnant

    compatibility list).

    The first server appears to see the good in the console of the virtual server storage Center.  The second server will see s for only its own storage room tho.  How do both to see and use the same storage.  The concept is new to me, but trying to learn.  Is there something I need to see the same storage in the virtual Center for TWO machines esx Server?  All IM just not in the right place?  Thank you.

    http://communities.VMware.com/thread/78873 was a previous thread on this can enlighten us. Looks like the 4354R has the bus is divided into 2 x 7 disks and each connector in the back can 'see' 1 of the two buses. The quickspecs (http://h18000.www1.hp.com/products/quickspecs/10624_div/10624_div.html) refer to "... allows access to two areas of storage separated from two different servers. So the first "thing" would be to get two buses attached together inside the unit so that the two connectors on the back see all readers, you must get the endpoint SCSI disabled on the device (you want termination on each 'end' of the cable that is two SCSI adapters in the servers).

    While you might be able to get the 4354R shared between the two ESX hosts, you can also get all the benefits of the shared disk + the possibility of vMotion, etc. by implementing the 4354R known as iSCSI or NFS storage. It also swings you back to something that is 'supported '. To do this, you have two approaches

    1. Fix 4354R on one of the ESX boxes, create a virtual machine that has access to the entire disk on the 4354R and run something like OpenFiler in the virtual machine to 'share' the disk via NFS or iSCSI

    2. Set up a 3rd server if you have one available and run the version of "bare metal" OpenFiler, or install Linux or OpenSolaris distribution and configure NFS and/or iSCSI target.

  • Import video with two-way audio options.

    So, I was on the Mirillis Action! (Screen Recorder) Forums and did not find the solution. The problem is when I import the file it says its not supported.adobeimportingmessage.JPG

    As you can see, there, so the video specifications are .avi with 2-way audio files. (Action! Recorder has a feature where it records your comment and saves it in the AVI as the second audio path) Apparently, WMP does his game, no video at all. In addition, Virtual Dub will not import it. (See the second picture) error.JPG So I don't know how to fix this, but you're good at using this program! I hope that you guys will find a solution quickly. I think I have a few codecs, but I don't know where to start.

    Someone help me find the problem is this so I'm all together thank you for your time.

  • Two-way interfaces between OLM and ELS

    Hi people

    New to OLM, but after spending some time looking through books and searching the Web, I'm still a bit ambiguous on the OLM connectivity and an external training provider.

    I was asked to look at a few options for the connection between our current system and the ELS who will provide training for internal clients (who will reserve / register on the courses within the OLM) and external customers who will book / register directly on the SLE.

    Apparently the training itself will take place directly online if the ELS rather than OLM - even if the customer is registered by Oracle.

    Anyone had any experience of how this might work? Certainly there is an API for loading in external mass of learning (OTA_NHS_API), so I guess that who could answer the records from the SLE in Oracle, and just create a standard check out according to the requirements of the SLE for the traffic in the other direction.

    I can't help but think, however, and forgive me for oversimplifying here, that we we would be better looking like more connectivity sown between the Chapter and the ELS using API and connectivity available SCORM.

    Is there something more than a functional facility required for this? If we already have licenses for OLM is there likely to be additional license or cost requirements?

    Thanks a lot for any input.

    Concerning

    CK

    Hi CK,.

    Usually the integration with a content provider of external learning (as a SkillSoft) is achieved through the integration of the AICC, where the seller provides you with the AICC metadata, it is imported in the LMS and when launched content run outside to the seller via AICC.
    I would check with the content provider, if it is an option that they provide, and if so, this should be the method used.

    Scott
    http://www.seertechsolutions.com

  • How can I deal with audio, separate left / right and make each stereo - CS5

    I have a microphone mono two record that I can separate into two separate audio editing one tracks is now left follow in a separate timeline and the other is in the other scenario, how to make each of these pieces then in Pseudo stereo tracks?  What I have to go to Soundbooth or is there a simple way in first?

    One can also make the mixture in the SB (think that new releases are multi-track now), but the import can duplicate and panning the original and the Dupe, as required, then export.

    However, this should not be necessary with complete filling left/right.

    It gives you sort of 2.5 ways to do. Try to 'easy', to work from there.

    Good luck

    Hunt

  • How can I sync my email between my mac and my iPad

    I'm a Road Runner e-mail account and use Outlook on Mac.  I also have an iPad 2 Air which I just bought.  Is it possible to sync my email between my mac and my iPad?  I wish I could use my Mac or my iPad to check my email and store messages in my files.  I currently can't do this on my Mac, I don't know how to synchronize between both devices.  Did I ask for possible?

    If the e-mail account can be configured as IMAP, you can add the account for both devices and they will keep in sync.

Maybe you are looking for