How to get windows xp re - install for installing the flash drive to the computer error portable "windows\system32\config\system".

Similar Questions

• How to fix \windows\system32\confjg\system

  what computer turning on a note comes up saying: Windows didn't start because the following file is missing or damaged:

  \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  How to do a repair installation to repair Windows 7
  This will show you how to do a repair installation (aka: install upgrade on-site) for fix your currently installed Windows 7 and preserve your user accounts, data, programs and drivers of the system.
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  No-reformatting of Win7, non-destructive reinstall
  http://WindowsSecrets.com/top-story/WIN7S-no-reformat-nondestructive-reinstall/

  Note: create if possible a Backup of the Image before you start Windows.
  This is your backup in case something goes wrong.
  After you have repaired your PC and then create a new backup 'Last known good configuration' Windows.

  EaseUS Todo Backup Home V8.6 http://www.todo-backup.com/home/home-backup.htm
  Free version: http://www.todo-backup.com/products/home/free-backup-software-features.htm
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  Supports version 8.6 XP, Vista, Windows 7, Windows 8 / 8.1 and Windows 10

  J W Stuart: http://www.pagestart.com

• Problems starting Windows XP. I get "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM"message.

  Original title: start windows xp questions

  Windows xp. When I try to start the system I get the message "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM... I have an xp disk and code but not sure if it is the origanal. When I start the computer, it does not start the windows xp disc.

  If you get the message hal.dll missing, your system is still booting from the hard drive and do not boot from the XP Recovery Console CD (I hope that you have created).

  There is no hal.dll on the CD you made if all goes well.

  You must enter the BIOS of your system and make the first boot from the CD to your Pcakard device Bell looks like it firstly, instead to focus first on the HARD drive (make the drive the second choice for now).

  Searching the Internet, I found a message that says to enter the Packard Bell BIOS you must do this:

  Users of Packard Bell, you can access the BIOS set up by pressing the keys F1, F2 or del

  I don't have a PB, so I can't say for sure if that works, or what to do after that - you will need to look around the BIOS for things like the boot order boot priority, etc. and make the CD drive the first choice, second choice HARD drive, save the settings, then you can boot from the CD I hope that you have made using these instructions.

  Generally when the system detects a CD is inserted, it will sell you a message like this:

  Press any key to boot from CD...

  Then all the button and follow the rest of the instructions...

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Windows xp sp3 corrupted/missing windows system32\config\system

  Due to the plant after installing sp3, I got the message: "windows has not start because the following file is mising or corrupted \windows\system32\config\system."

  Then, I preformed another destructive restore. again, had the same message. Instead of making another destructive recovery, I did a repair.

  Everything was fine, installed all updates etc. Until I installed sp3. I woke up, started the pc and ONCE again, got the same message.

  I have a HP a375c running windows xp (with sp3).

  I can occasionally, to restart, and it will load. But it's unstable. I can't trust to continue trying to restart and then ultimately won't be able to end.

  I also received a message: c:\i386\dist\system32\dll.dll can not be recovered.

  The system is unstable. ANY help would be greatly appreciated. Apparently, will not be supported sp2 for my system more, Windows XP 32-bit Home Edition.

  How can I fix? It seems to me, that's a problem with sp3.

  I'm tired of performing, destructive and non-destructive, System Restore, etc. Over and over again. Only that it is down. As you know, doing the recovery takes ALL DAY, having to get all updates.

  Help, please...

  I use the original recovery cd of HP.

  HP Pavilion A375c Windows XP Home Edition 32-bit

  I changed the drive (long ago) of chkdsk, found no problems.

  I added Ram.

  This message refers to the hive of the registry.  Is to say that the registry is missing or corrupted, in which case it cannot be loaded.  the question is what is the cause of registry errors.

  It would again be a failing hard drive? Perhaps, your poor quality in windows software installation.  Perhaps, you use your system very strongly but not to keep optimized/set up as regular check records and defragments.

  the disk check reconcile file in the file system to the master file table.  because as long as the files are indexed on the mft, then they won't show up missing.  and Defrag makes sure that the files on the disc are not highly fragmented, as your registry hive.   If one of the many fragments that make a single file corrupted, then all the fragments that becomes unusable.

  so, my suggestion is that if you do not have access to a cd to boot xp in order to launch the recovery console and access the drive prompt, then try to do a boot-able with utilities on that cd so that you don't have to use your recovery cd.

  I did not one of them provided by this site, but I've not heard bad things on this subject: http://www.ubcd4win.org/index.htm

  then when you finally get to the disk prompt run command >:

  Chkdsk /r

  the slash r will mark bad sectors on your hard disk and make windows to ignore the wrong places when writing data to the hard drive in the future.

  also, since you seem to escape that you get this type of error several times, then my suggestion is to make a backup of your registry hive.  This way you can restore via a boot-able floppy.

  If the disk check / r fails to correct the problem with the registry, then you can replace it with a base in a safe place inside the windows folder.

  Keep us updated on your condition.

• Windows system32\config\system file corrupt / missing

  I have Windows XP Home edition on my Sony Vaio. Cannot start Windows because I get a msg saying following file is damaged or missing windows system32\config\system
  Sony support suggested I start mode F8 and select know last good configuration. I tried and got a msg saying that Windows could not start because the following file is missing or damaged
  \SYSTEM32\NTOSKRNL.exe
  Sony support is now suggesting a full recovery, but I don't want to lose all my data!  Any suggestions on what I can do to fix it, but also, let me keep my data?  Thank you!!

  
  Corrupt des/windows system32\config\system missing file? How to fix without losing my data? Support Sony says full recovery of the system, but I'll lose data and sounds very drastic!

  e star,
  For your Windows CD, which would have been provided by the PC manufacturer.  Sometimes they have a partition on the hard disk that contains the recovery software and can be viewed during the start up.  You should check with the manufacturer of PC for more information about the recovery options.  Also if they did not provide a CD sometimes they offer the recovery media for sale.

  The problem here is that something has happened to the ntoskrnl.exe file.  It is difficult to replace just this file because the version that's on a CD may be different for the version that you had on your system.  If replace you it with another that it could potentially cause other problems.

  At this point, you will need to do a repair install or restore clean install\factory.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win XP with Windows\system32\config\system error message unable to restart in any mode.

  I have a desktop computer Acer, about 4 years old, running Windows XP SP2. When I started my computer, it does not boot in any mode, and I get this error message:

  Windows has not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can attempt to repair this file by starting windows setup using the original setup cd-rom
  Select 'r' in the first screen to start repair.

  I don't have a Setup disk and wonder if it would help in all cases. Any ideas?
  You can not download configuration online info. I have a second XP computer which is supposed to have access to the configuration file in the Add/Remove Programs section, but I don't have any tab to create a disk for installation here. Do you know where he's hiding on this computer? If not, can I get a copy of this MS installation disc?
  Thank you

  Thank you

  Manual steps to recover a corrupted registry that prevents the start of the procedure that this article describes to Windows XP using System Restore and Recovery Console. This article lists also all required specific steps to ensure that the process is fully completed. When you have completed this procedure, the system returns to a state very close to the State until the problem occurred. If you have ever run NTBackup and completed a system state backup, you don't have to follow the procedures in parts two and three. You can go to part IV. First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the System32\Config folder. When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
     Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
     MD tmp
     copy c:\windows\system32\config\system c:\windows\tmp\system.bak
     copy c:\windows\system32\config\software c:\windows\tmp\software.bak
     Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
     copy c:\windows\system32\config\security c:\windows\tmp\security.bak
     copy c:\windows\system32\config\default c:\windows\tmp\default.bak

     delete c:\windows\system32\config\system
     delete c:\windows\system32\config\software
     Delete c:\windows\system32\config\sam
     delete c:\windows\system32\config\security
     Delete c:\windows\system32\config\default

     Copy c:\windows\repair\system c:\windows\system32\config\system
     copy c:\windows\repair\software c:\windows\system32\config\software
     copy c:\windows\repair\sam c:\windows\system32\config\sam
     Copy c:\windows\repair\security c:\windows\system32\config\security
     Copy c:\windows\repair\default c:\windows\system32\config\default

  6. Type exit to quit the Recovery Console. Your computer will restart.

  Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

  If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

  batch regcopy1.txt

  With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use the batch command, you do not have to manually type as many commands. Second part to perform the procedure described in this section, you must be logged on as an administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

  Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

  1. Click Start , click shut down (or click turn off computer ), click restart , and then click OK (or click restart ).
  2. Press the F8 key.

     On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

  3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
  4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

  In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

  1. Start Windows Explorer.
  2. On the Tools menu, click folder options .
  3. Click the view tab.
  4. Under hidden files and folders , select Show hidden folders and files , and then click to clear the Hide protected (recommended) operating system files check box.
  5. When appears in the dialog box confirming that you want to display these files, click Yes .
  6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
  7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

     Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

     Note You may receive the following error message:

  C:\System Volume Information is not accessible. Access is denied.

  If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

  309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
• Open a folder that was created not at the present time. You may need to click Details on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
• Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
  C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
• Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
  • _REGISTRY_USER_. DEFAULT
  • _REGISTRY_MACHINE_SECURITY
  • _REGISTRY_MACHINE_SOFTWARE
  • _REGISTRY_MACHINE_SYSTEM
  • _REGISTRY_MACHINE_SAM
• Rename the files in the C:\Windows\Tmp folder as follows:
  • Rename _REGISTRY_USER_. DEFAULT DEFAULT
  • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
  • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
  • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
  • Rename _REGISTRY_MACHINE_SAM to SAM

These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

Part three in the third part, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

1. Start the Recovery Console.
2. At the command prompt, type the following lines, pressing ENTER after you type each line:
   del c:\windows\system32\config\sam

   del c:\windows\system32\config\security

   del c:\windows\system32\config\software

   del c:\windows\system32\config\default

   del c:\windows\system32\config\system

   copy c:\windows\tmp\software c:\windows\system32\config\software

   copy c:\windows\tmp\system c:\windows\system32\config\system

   copy c:\windows\tmp\sam c:\windows\system32\config\sam

   Copy c:\windows\tmp\security c:\windows\system32\config\security

   Copy c:\windows\tmp\default c:\windows\system32\config\default

Note Some of these command lines may be wrapped for readability.

• Type exit to quit the Recovery Console. Restart the computer.

Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

regcopy2.txt batch

Fourth part

1. Click Start and then click all programs .
2. Click on Accessories , then System Tools .
3. Click System Restore , and then click restore to a previous RestorePoint .

Good luck! Please rate me upward if you find my post helpful. Thank you!

• Windows system32 config system is missing or damaged vista!

  OK, I got this message (windows system32 config system is missing or damaged vista) when I start my computer and I don't have a Setup disk or the recovery disk? How can I fix it?

  and I was wondering if I could upgrade to windows 7 same with that?

  The upgrade must be done out in a Vista operating system.

  If you cannot start in Wiondows:

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows\System32\Config\System is missing or damaged is

  I received this message saying windows\system32\config\system is missing or damaged. Windows Vista is already installed in my laptop, so I don't have the repair disk to fix this. What should I do now?

  I received this message saying windows\system32\config\system is missing or damaged. Windows Vista is already installed in my laptop, so I don't have the repair disk to fix this. What should I do now?

  Hey Saucilito

  the link below is how to download and do a vista Startup Repair disk

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use it

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  and if you need to reinstall vista

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Walter, the time zone traveller

• \Windows\system32\config\system MISSING file of repair

  I have a T400 who HAD an XP Pro operating system... Google chrome has frozen the system and I did a hard reboot and the computer had lost the configuration of the registry file. Microsoft recommends that the oem disc should be used, instead of a commercial version of the operating system. It's my DISLIKE for the purchase of a laptop computer with the OEM software, without a backup disk. If there is a problem, the manufacturer generally is going to drag you dry. I thought that this stratagem of Toshiba, but not of Lenovo. Hell, you can't even ask 'em to a disk if you are out of warranty. Stone wall. Why is it not possible to ask even an OEM Lenovo restore disk? Unless you have the security privileges, there is no way to even ask a repair disc: repair file \windows\system32\config\system MISSING this thread has addressed the topic of config file missing and from the looks of it nothing of this worked when even though the guy has abandoned and performed a clean installation and lost three days : http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/How-to-repair-corrupt-windows-system32-c... This is not the problem of problems it's despair. I have a lot of files on that drive the need for recovery. I just want to get some tips on how to record what I have and do not go the trouble to reinstall my entire library of software and then having to reinvent my lost files. Ridiculous. Where there is an article on what works?

  
  

• file missing or corrupt windows\system32\config\system

  HELP - by on the title I did: -.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
     Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
     MD tmp
     copy c:\windows\system32\config\system c:\windows\tmp\system.bak
     copy c:\windows\system32\config\software c:\windows\tmp\software.bak
     Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
     copy c:\windows\system32\config\security c:\windows\tmp\security.bak
     copy c:\windows\system32\config\default c:\windows\tmp\default.bak

     delete c:\windows\system32\config\system
     delete c:\windows\system32\config\software
     Delete c:\windows\system32\config\sam
     delete c:\windows\system32\config\security
     Delete c:\windows\system32\config\default

     Copy c:\windows\repair\system c:\windows\system32\config\system
     copy c:\windows\repair\software c:\windows\system32\config\software
     copy c:\windows\repair\sam c:\windows\system32\config\sam
     Copy c:\windows\repair\security c:\windows\system32\config\security
     Copy c:\windows\repair\default c:\windows\system32\config\default

  6. Type exit to quit the Recovery Console. Your computer will restart.

  Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

  If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

  batch regcopy1.txt

  With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use thebatch command, you do not have to manually type as many commands.

  Second part

  To perform the procedure described in this section, you must be logged in as administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

  Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

  1. Click Start , click shut down (or click turn off computer ), click restart , and then click OK (or click restart ).
  2. Press the F8 key.

     On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

  3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
  4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

  In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

  1. Start Windows Explorer.
  2. On the Tools menu, click folder options .
  3. Click the view tab.
  4. Under hidden files and folders , select Show hidden folders and files , and then click to clear theHide protected (recommended) operating system files check box.
  5. When appears in the dialog box confirming that you want to display these files, click Yes .
  6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
  7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

     Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

     Note You may receive the following error message:

     C:\System Volume Information is not accessible. Access is denied.

     If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

     309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
  8. Open a folder that was created not at the present time. You may need to clickDetails on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
  9. Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
     C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
  10. Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
      • _REGISTRY_USER_. DEFAULT
      • _REGISTRY_MACHINE_SECURITY
      • _REGISTRY_MACHINE_SOFTWARE
      • _REGISTRY_MACHINE_SYSTEM
      • _REGISTRY_MACHINE_SAM
  11. Rename the files in the C:\Windows\Tmp folder as follows:
      • Rename _REGISTRY_USER_. DEFAULT DEFAULT
      • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
      • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
      • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
      • Rename _REGISTRY_MACHINE_SAM to SAM

  These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

  The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

  The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

  Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

  309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

  Third part

  In part three, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

  1. Start the Recovery Console.
  2. At the command prompt, type the following lines, pressing ENTER after you type each line:
     del c:\windows\system32\config\sam

     del c:\windows\system32\config\security

     del c:\windows\system32\config\software

     del c:\windows\system32\config\default

     del c:\windows\system32\config\system

     copy c:\windows\tmp\software c:\windows\system32\config\software

     copy c:\windows\tmp\system c:\windows\system32\config\system

  copy c:\windows\tmp\sam c:\windows\system32\config\sam

  Copy c:\windows\tmp\security c:\windows\system32\config\security

  Copy c:\windows\tmp\default c:\windows\system32\config\default

  Note Some of these command lines may be wrapped for readability.

• Type exit to quit the Recovery Console. Restart the computer.

Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

regcopy2.txt batch

Fourth part

1. Click Start and then click all programs .
2. Click on Accessories , then System Tools .
3. Click System Restore , and then click restore to a previous RestorePoint .

and now when I go to the fourth part and try to connect, it says I need to activate windows to open a session. If I click on Yes, the computer crashes just in my background image, if I click on no, this Chuck me back to the log in page... What is wrong with this blooming thing

Please HELP - it took three days of messing around and actually the Ive got nowhere!

OOOOO... should start here:
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)
These can cause corruption in the file system that must be fixed before you do anything else.
If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).
There is zero logic to start try to copy files to a hard drive that has a corrupted file system, so this must be first using the XP chkdsk program and run chkdsk can solve your problem completely.
Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.
Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable XP Recovery CD of Console.
This is not the same as recovery disks that may have come to a store to purchase the system.  If you don't know what kind of bootable CD, you, do a CD of bootable XP Recovery Console and do not forget.
After booting into the Recovery Console, you should be in this folder:
C:\WINDOWS
For each of your hard disk partitions, you must then run:
Chkdsk /r
For example, at the Recovery Console prompt, enter:
CHKDSK c: /r
Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.
The chkdsk/r must be completed without error, you may need to run several times until it does.
Remove the CD and then type "exit" to exit the RC and restart the computer and the report with your progress.

Do, or do not. There is no test.

I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows\System32\Config\System is corrupted or missing from WinXP Pro

  I can't start Windows Xp Pro. I get the following error message:

  Windows\System32\Config\System is corrupted or missing. How can I fix the problem?

  Hello krazykat9999,

  We get this error when you are either unable to see the registry of the system hive or he is actually corrupt.

  To remedy this, we need a Windows XP CD.  If you do not have a Windows XP CD you can borrow one from a friend for repair purposes.  If we are unable to get the CD anyway, there is another process that we can use.  Please let us know and we will send you this information as well if necessary.

  To boot into the recovery console, use the following article:
  Description of the Windows XP Recovery Console for advanced users

  Once connected, use the chkdsk command to check the disk for errors.
  This will be a certain amount of time and should not be interrupted:

  CHKDSK C:/p

  Again, this will take some time to complete.

  If this does not work, please see the following article to get back to a backup copy of the registry:
  How do I recover from a corrupted registry that prevents Windows XP startup

  Let us know if you have any questions about it.

  Best regards
  Matthew_Ha

• Windows didn't start because the following file is missing/windows/system32/config/system Windows XP

  Original title: repair/restore of windows?, a little confused?

  My brother has problems with his computer. It happens that windows didn't start because the following file is missing/windows/system32/config/system. I need to know how to do this, but for some time.

  On the sites, some say not to use get it back? (is that right?) Here's what they say. He has not brought his xp disk, I tried an iso online but lacks the EULA. I have a windows xp update here somewhere, thatt allow me to fix his system?
  I basically have to hit enter then press R? Thank you

  1. Press Enter to start the configuration of Windows.

     do not choose "to repair an installation of Windows XP using the Recovery Console, press on R", (do not want to load the Recovery Console). I repeat, do not choose "to repair an installation of Windows XP using the Recovery Console, press on R.

  2. Accept the license agreement and Windows will search for existing installations of Windows.
  3. Select the XP installation you want to repair in the list, press Rto start the repair. If the repair is not one of the options, END of installation

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  Nice day

  I'm getting this ' file is missing or damaged:------WINDOWS-SYSTEM32-CONFIG-SYSTEM ' error and Windows does not start in the F8 boot options. When I disable the auto reboot, I get a BSOD 51 registry error, consistent with the file "missing or corrupt" error Surprisingly "Recovery Console" works so I used to run chkdsk. This has not solved the problem, but even once, surprisingly, the utility reported no fixed error. Ok. I do research online (using another computer of course) and check out the many tips that I copy some files in my "c:\windows\repair" folder in the folder 'system '. Before I had time to do that, however, I found an article from Microsoft stating that this should not be done if you have an OEM System... what I'm doing. Apparently, hives system on these OEM installed OS set other passwords that can permanently block you on your records if you use this method. Thanks for the warning. My system restore disc is nothing more than a tool of re-insall OS that will wipe all my data in the process, and this is not desirable. Currently, I see again all my data on the drive by using the "recovery console". I'm ready to thread the needle on this one in the hope of re - access the operating system, although in some limited capacity. Any help would be greatly appreciated.

  When you run chkdsk in RC, did you use the /r switch? This is the key! In other words, this should be the command:

  Chkdsk /r

  (there is a space before the slash)

  Moreover, KB307545 can be run safely on most OEM XP installations. Of course, nothing is guaranteed 100%.

  Before you do this or else, you really must ensure all data is stored safely. One way to do this is to start on a live Linux CD and then copy the files to an external hard drive. Another way is to connect the problem hard drive into a working PC and copy the files in this way. This could be done by the servo drive or with an adapter like this:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002&TPK=N82E16812161002

• I have a pc running windows xp and im receives the window\system32\config\system message

  I have a pc running windows xp and im receiving the message window\system32\config\system I do not have a cd-rom drive, how do I get a copy of this disc help please

  Hello

  · What is the number and the model of the computer?

  · Were there any changes made on the computer before the show?

  You can check the link that contains information about the same: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  For the installation disc, you may need to contact the manufacturer of the computer.