How to go down rather than automatic round until a.5

Similar Questions

• How dumb you down a small business SF300 until a transparent bridge?

  I use the Cisco SF302 switches as a connection to wireless devices that will be the link between the two buildings.

  In this configuration: Cisco 3570 in building 1 > Cisco SF302 > 1 wireless bridge construction > construction 2 Wireless Bridge > Cisco SF302 > Cisco 3560 in building 2.

  It seems that by default the SF302 are not acting as bridges, transparent and just leave all my 802. 1 q through traffic.

  How dumb them down for that all 802. 1 q traffic is treated by the 3570 and 3560 with just SF302 acting under the bridge let my 802. 1 q to cross safely?

  Thank you.

  By default, VLANs are not automatically added to trunk ports. You must create them and assign them to the trunk ports. This has been done for security reasons.

• How to make Portrait rather than landscape mode

  In xp... I have 2 HP Lp2465... I want what they mode Portrait in the landscape.  I can't find all the orders that will do that on my screen... Any help.  Also, the mouse will not travel on the other screen.

  Mike

  Hello

  You need your computer supports it, what is your computer and its operating system? To help us respond more quickly, please read this:

  http://h30434.www3.HP.com/T5/first-time-here-learn-how-to/welcome-get-started-here/TD-p/699035

  Kind regards.

• Export items from drop box down, rather than the value of exports.

  We have a form with a button (xfa.host.exportData("")

  , 0) ;) in click event to export data .xml..

  Is it possible to export the items (text) selected in drop-down boxes instead of the values?

  Thank you

  Value is the one that will be exported out of the PDF file.

  The option you have in this case, it's having the same text for the value in the drop-down list properties.

  Thank you

  Srini

• Workstation 9.0.1 rather than network (PXE) boot

  I installed Workstation 9.0.1 on my Windows 7 computer. I created a new virtual machine, but when I put it to perform a PXE (network) boot, he never does an IP address of our DHCP server. I know that the DHCP server is not the issue, as I have Virtual Box installed on the same machine and it PXE starts without a problem.

  I use bridged networks.

  Welcome to the community,

  you have multiple network cards in your host system (for example, wired and wireless network)? In this case open the "Virtual Network Editor" and select the appropriate (rather than "automatic") for the bridged network adapter to see if that helps.

  André

• How can I automatically have Favorites in a new tab rather than the tab I am when I select a bookmark?

  How can I get bookmarks will automatically open in a new tab rather than the tab I am when I select the bookmark?

  You can middle - click a bookmark to open it in a new tab. There are also some quitre some add-ons that have this feature, for example:

  • Open bookmarks in a new tab

  The following modules add the functionality you want, more a certain tab more options.

  • Tab Mix more
  • Tab utilities
  • Tab Utilities Lite
  • Tabberwocky
  • Super Mode tab

  There will be a little more, you can find several by searching the Add-ons site.

• How can I do to a file PDF opens automatically in tabs rather than in a new window?

  With the help of Adobe Acrobat 2015.006.30094.

  I think you have the permanent license rather than a subscription version. Like all the old versions, it will get only what's new with paid upgrades. One day. Only the subscription version has smaller evolutionary changes.

• How to transform a square into a circle or a square automatically rounded corner?

  Hi all

  I have read old topics and similar questions and found answers part, including an action illustratir which does not work in CS4 and after. My apologies if I missed the other relevant answers.

  Here is a description of what I want to achieve. I have all kinds of forms - either rectangular or square - a drawing in phtoshop. Note that some forms are not girls like (do they are like a thick line drawn in a rectangular shape. I want to "round" each shape in varying degrees, to give a rounded shaped corners to making it completely round or oval (respectively for a square, rectangle, of course).

  So, I want to select each shape in turn and apply a certain 'Borough', individually to each shape. Given that many of these forms, I am trying to automate the process save for the parameter that sets the rounding amount.

  I guess what I'm asking is if anyone knows of an Action that does just that. If not, could someone tell me how I can do it manually and I'll try to write an action subsequently.

  Thank you for your help

  Hi RoboChris,

  Rather than write every step of the way, I created a video that I think will help:

• How to shrink a picture to fit a model without losing the proportions of photos? When I pull the smaller image, it will lean or wide rather than staying the same but smaller...

  How to shrink a picture to fit a model without losing the proportions of photos? When I pull the smaller image, it will lean or wide rather than staying the same but smaller...

  Nice day!

  When turn you the image permanently the SHIFT key to keep the proportions or perhaps use file > Automate > Fit Image.

  Kind regards

  Pfaffenbichler

• How to print individual differences rather than individual pages? CS4

  I do a booklet and I want to print the first broadcast on a different paper type then the rest of the spreads. I hope that the InDesign allows you to print a gap rather than only certain pages. Do you know where I would go to do that?

  I don't know how to automate this process, but I could do this:

  Put 1 sheet of paper cover on the top of the paper in the tray and print the booklet normally. It may take some work to continue to add cover paper as needed if you print a lot of these booklets.

  Or do the 2 files for printing: cover, inside cover, inside cover and pages of coverage in one - print in a brochure on the cover stock. Inside pages in the other file, print on plain paper. Assemble by hand.

  Edited to add: I just noticed that the booklet is 53 pages long. Logically, it should be a number that is divisible by 4, because each sheet of paper will be 4 pages printed on it. If you have a back cover which should print on the same side of the same sheet of paper as the front cover, it must fall on page 56 (or 52 if you can adapt the text on one less page).

• How can I close a tab that has locked up, rather than farm the whole browser to be insensitive?

  I have a bad habit of having several tabs open. If I click on a link that translates the whole browser becomes unresponsive, how do I close the tab offending rather than having to close the entire browser and losing all my tabs?

  It is not a bad habit, it's normal.

  Unfortunately, there is currently no way to 'kill' a single tab without picking up Firefox.

  A few times a week I get "not responding" when I exceed the amount of memory Firefox can use. Usually about 60-90 seconds, I can close Firefox by using the menu, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit
  • These same keys in order:Alt f x

  Freezes caused by other reasons could not out, in which case you get stuck. Prevention is the best cure.

  This support article covers some common reasons for freezes: Firefox crashes or does not - how to fix.

  Since the Flash plugin can also cause this problem and it is used everywhere around the web, I suggest the following to minimize potential problems with Flash in your troubleshooting:

  (1) to avoid unnecessary pain on the sites where the Flash is not really essential, try to set the Flash on Click-to-Play (Ask 'activation'). This will delay the Flash start on a page, until you approve.

  To set 'Ask to activate', open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

  With this setting, when you visit a site that wants to use the Flash, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a gray rectangle dark in the page or an information bar sliding between the toolbar and in the page area.

  The plugin notification in the address bar icon usually resembles a little Lego block, dark gray. (If it is red, Flash must update.)

  The delay in the activation of Flash can help distinguish between the problems caused on the initial page load, put in folds and script activation vs Flash/loading bar.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar to allow Flash. You can trust the site for the time being or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification! He will just stand here in case you want to use it later.

  (2) a common cause of errors in script does not work in Windows Vista and later is the feature of mode of the Flash player plugin. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. You can disable it using the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.

• How can I set my homepage to a new request tab rather than "suggested" or "white"?

  With the latest updates of Firefox, the tabs have changed. In the past, I was able to have a new tab open to my homepage (google), but seem to now have sites either empty or suggested/frequently visited. Although this sounds like a minor problem, he build a movement additional/click/selection and is a bit of your time and irritating - most of my use of the internet has its source in a research rather than a favorite site.
  Someone knows a way back?
  Thank you very much.
  R

  The preference of browser.newtab.url has been added to Firefox 13. Over the years, he was repeatedly attacked by malware. From Firefox 41, the preference can be changed using an interface programming or, in simpler terms, an extension.

  For example, you can use this extension:

  https://addons.Mozilla.org/firefox/addon/new-tab-override/

  After installing the extension, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab override and click the Options button. (See first screenshot attached).

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Success?

  Once you have set it as you wish, you can close the Add-ons page (or use the back button to return to the list of Extensions of this Options page).

• How can I force Firefox to access an external web site rather than the site corresponding to the cache on my computer?

  A web site that I regularly access using Firefox has been updated in the last 24 hours. I make Firefox to access the external site updates rather than site updates apparently stored on my memory cache?

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

• How can I display 9 options in tabs rather than 6?

  I'm on a mac laptop rather than on my desktop PC. On the pc, I had 9 caps tab but on the mac, I only 6. How can I show 9 links of the tab?

  See this response: https://support.mozilla.org/en-US/questions/1081398#answer-776066

• How to select entire groups or to multiple recipients in MAIL, rather than one at a time?

  How to select entire groups or to multiple recipients in MAIL, rather than one at a time?

  One way is to use the app to create a group with the intended recipients. Then when composing the email just type the group name in the To: field.