How to have all audio pan in the Middle?

I'm new to first (the FCP 7 like a lot) and really miss me the ability to have all the sound elements just go in the middle.  My sound engineer gave me a stereo file with dialogue an actor channel and another channel on the right to the left, etc.. Creation of a height of these extreme left and right - I don't want that. Want it all in the Middle so I'm editing, I don't want the players bouncing right and extreme left. I'm not sound mixing, just edit photo.

I looked in the Audio Mixer Panel and the pan knob is in the Center, so that's not all.


Cannot change the drop-down list under change Clip Clip channel stereo format.  It is not selectable, so I can't do all the Mono (if that's even possible).


Normally I would split the stereo track so that it's two mono tracks, but the first does not let you do this. If I had hardware mixer, I would be just the stereo signal to mono sum, but I did not.  It is just out of my computer speakers.


Help!


Thank you.



You can change a clip before placing it on the timeline in order to have two-channel mono instead of stereo. Click with the right button on the assets in the project Panel select Edit / Audio channels.

Tags: Premiere

Similar Questions

  • How to have all audio playback with headphones and replace the speakers

    headphones and speakers - interface

    This is probably a stupid and basic question normally, I'd be embarrassed to ask. But I'm old enough not not to be bothered much more. I would like to have all the sound elements come through the headset and replace the speakers. But when I plug the headset comes through both. It worked fine a few days back, but not now. Help!  Please, I beg you!

    Hi pam1948,

    Here are some steps that you can follow and check if they help you in fixing the issue:

    Make sure that the headset is set as audio device by default.

    To do this, follow these steps:

    1. click the Start button, select Control Panel, click hardware and soundand then click sound.
    2. click on the read tab.
    3. select headphones and then click set as default.
    4. on the playback tab, select the playback device, click set upand make sure that the configurations are set correctly.
    5. click OK to save your settings.

    Kind regards
    Abdelouahab

    Microsoft Answers Support Engineer

  • I made a backup once, but I lost everything, but not know I need how to restore all my message of the whatspp from the beginning

    I made a backup once, but I lost everything, but not know I need how to restore all my message of the whatspp since the beginning thank you

    < re-titled by host >

    IF you have lost the backup iPhone info WhatsApp went as well. WhatsApp does not keep the conversations in the cloud, only on your phone.

  • I'm new to lightroom 6. I look at try videos &amp; they have sport options in the right panel. When to go to import, I have a small rectangle in the middle of my screen. How can I display the import options in the right panel?

    I'm new to lightroom 6. I look at the video traing & they import options in the right panel. When to go to import, I have a small rectangle in the middle of my screen. How can I display the import options in the right panel?

    Hi marinersr,

    You don't mean that the import window is reduced?

    You can develop that will bring to the top of all the options to import for you.

    Kind regards

    Claes

  • I have all these numbers in the box of my Adobe Photo elements first items 11, but I can't find the serial number

    I have all these numbers in the box of my Adobe Photo elements first items 11, but I can't find the serial number

    Find the serial number of your Adobe product quickly

  • How to learn and work CS6 in the middle of nowhere?

    Hi all

    I live along the Cordillera of the Andes, and the first good internet connection is 30 km from my "casa de campo".

    then, how should I do?

    First question (thanks)

    1. I go to the 'city' with my MacBook Pro (light) and I load programs and updates.

    2 when he is home, I connect my MacBook Pro to the iMac (heavy) and I do the updated iMac updated in this way.

    question: it will work if I buy CS6 on my MacBook Pro and 'copy' on my iMac?  so a license on two computers

    and I'm going to use a single computer at a time.

    Second question (thanks for your patience)

    1. I am week in Buenos Aires with an internet connection listen buy CS6 there and load it on my MacBook

    2 but there is so much tutorials I want to copy them all, go back to the middle of nowhere and start learning on my own

    question: If this is possible, how to copy the tutorials?

    Thanks for the patience you, have a nice day

    Richard

    CS6 is still available on CD/DVD as a suite. Amazon and other websites should always be selling it. This license is good for 2 computers, 1 only can run the suite at the same time. But can be installed on both.

    Looking at this site, look for tutorials on CD. Download a few pounds more, which are also available as ebooks or books kindle. The kindle software is free for most systems like windows and Mac.

    The CC version or cloud probably not would be for you unless you can ensure that you can get an internet connection once a month. But if you can not do not worry, the software will reactivate the next time you connect.

    Good luck...

  • How to make all audio at the same level?

    I have a sequence of many clips in first pro, and I could swear I've heard of a way to make all audio on the same level or db. Is there a way to do this? I have a few clips in the timeline with different levels and should be old enough to go to manually balance their volume.

    There is a way to do what you want, but it must be used with caution.  If you open the Audio Mixer Panel, select mixer of track and the track that your clips are on.  Click on the arrow at the top left of the track work (you may need to do it twice) and and access the small white window that goes down.  (See using Adobe https://helpx.adobe.com/pdf/premiere_pro_reference.pdf page 365 if you have not done this before) In the right side of this window, right-click on one of the spikes back arrow and select Amplitude and Compression and dynamics.

    The word dynamic appears in the white window at the top of channel mixer.  Left click on the word dynamic and select Edit.  I pasted below the appropriate settings.

    If you are not familiar with Compressor/Limiter, use the parameter above.

    Now read your timeline and listen carefully while I look at the counters this setting should be good for normally recorded material, and I hope that you do have to do something more. If there is still following problems may be necessary. Schedule audio below (2) drag any clip that's too soft.  All that is too strong to do drag on the calendar below that (3). For the dynamic audio editing 2 repeat the process with the effect but change the makeup to 12.00dB.  For editing audio 3 change the makeup to 0dB setting.  It's not perfect, but it should give you a low-tech solution.   I hope this helps.

  • Hello. I have a site that display many audio outputs using the &lt; audio &gt; HTML5 tag. Firefox is the only browser that fails to show all audio files on the Web page.

    It shows only the first audio file. All other browsers show all audio files...?

    The file is played for me, so it is possible that you need to re-code the ogg files to make them compatible with Firefox.

    I can play with MPlayer and VLC on Linux, but not with the audio player in Firefox.

  • How to play several audio files at the same time and mute toggle some voices?

    Hi all

    Forgive me if this is mentioned elsewhere and kindly point me in the right direction.  I'm a kid with flash and action script so if you are in doubt, error on the side of more specific in your response, there is a lot of vocabulary I still don't know.

    The goal:

    I have 4 audio files which are Soprano, Alto, tenor and low voice of a musical example.  The result should allow the user to play all 4 voices at once and dumb voice specific to hear all the possible combinations of voices playing together or solo.  I imagined a check box at the beginning of each rated musical line that puts that voice muted when checked.

    It would be ideal to have the game, interrupt and stop reproduction choices where 'Stop' resets playback at the start and 'Pause' maintains the current place in time and takes over from there, once playback is started again.

    I am able to get the simple audio files to play from a single button, but I am struggling to find how to link multiple audio files to start at the same time by a single button.  I found this link: https://forums.adobe.com/thread/1069107?start=0 & tstart = 0

    where the last message mentions the use of tables, but being a complete beginner, I don't completely understand what they are doing.

    I know it's a big piece of questions at once, but if you could meet any part of it, or direct me to a tutorial/instructions, I would really appreciate it.

    Thank you for taking the time to help others

    use:

    kglad wrote:

    use:

    import flash.events.MouseEvent;

    import flash.media.SoundTransform;

    var soprano: Sound = new Soprano();

    Var high: Sound = new Alto();

    var tenor: Sound = new Tenor();

    var bass: Sound = new Bass();

    Ash var: Array = [soprano, alto, tenor, low];

    var offsetA:Array =]

    var st: SoundTransform = new SoundTransform();

    play_btn.addEventListener (MouseEvent.CLICK, playF);

    pause_btn.addEventListener (MouseEvent.CLICK, pauseF);

    stop_btn.addEventListener (MouseEvent.CLICK, stopF);

    playF function (e: MouseEvent): void {}

    for (var i: int = 0; i)< sounda.length;="" i++)="">

    This ["sc_" + i] = [i] Sunda () .play;

    }

    }

    function pauseF (e: MouseEvent): void {}

    for (var i: int = 0; i)< sounda.length;="" i++)="">

    offsetA [i] = this ["sc_" + i] .position;

    This ["sc_" + i]. Stop();

    }

    }

    function stopF (e: MouseEvent): void {}

    for (var i: int = 0; i)< sounda.length;="" i++)="">

    offsetA [i] = 0;

    This ["sc_" + i]. Stop();

    }

    }

    function unpauseF(e:MouseEvent):void {}

    for (var i: int = 0; i)< sounda.length;="" i++)="">

    This ["sc_" + i] = Sunda [i] .play (offsetA [i]);

    }

    }

    function muteF(i:int):void {}

    St.volume = 0;

    This ["sc_" + i] .soundTransform = m;

    }

    function unmuteF(i:int):void {}

    St.volume = 1;

    This ["sc_" + i] .soundTransform = m;

    }

  • 12 items: how to move an audio excerpt of the film to the menu?

    In the film, I have a clip of a hippopotamus pool, bit noisy. In the menu, I have a picture of the pool as a backdrop for scenes from the movie. How can I add the noisy audio clip to the menu?

    Thank you

    christenax

    christenax

    It's part 2 part answer 1 post numbered 6 above.

    Please refer to the screenshot below

    Let's say you have a 2 minutes 18 seconds music video on the hard drive of your computer and you want to use a second 30

    part of it. If you don't want to change the music file in advance...

    In the customization Menu/Audio movie box, click Browse and find and select your music file.

    With your computer on, and then speakers click on the green triangle to start a play back of your music since its inception.

    You're going to let the music play until you hear where you want the music to the start menu and read

    starting there a loop 30 seconds before her. So, when you hear this point in music, click on the green triangle again.

    This time to stop playing music and all that point as the beginning of the 30 second music insertion.

    Please let us know if it works for you.

    Details in positions 6 and 7 should give you what you are looking for in the audio menu customization. If not, please details were

    they fail.

    Thank you.

    RTA

  • How to turn an audio waveform in the timeline in first Pro CC

    I don't know why I don't get a clear answer to this question, but can someone help me here? In the first CS6, all I had to do was press the small arrow next to my calendar, and I could see the audio waveform. The arrow is no longer in CC and I can't figure out how else to do this to put on. I use this function constantly, so it's pretty annoying don't not to have it on.

    Scroll the mouse wheel while now the pointer on the header of the track.

  • How to have a DAILY subtotal in the current list

    [(RE: à l'aide deles de numéros de version 3.6.2)]

    Hello

    I have been searching & reading & experimenting until I'm blue in the face. I can't seem to find a way to have a subtotal daily, as shown in the attached screenshot.

    Here is a list of donations that come this organization that I work, and they want to be able to view a drop-down list of income (provided by PayPal) but to see how each day totals to; then, inside, have shown total so far .

    Yes, Paypal has reports & such, but curiously, they do NOT provide a breakdown by 'élément ID' (ie: each donation button has a "item ID" attached to it depending on what page the button is on - tells us what thing should go to). so I'll have to do a dump CSV 'story' every night to sort the CSV by item ID, and then paste in this spreadsheet of numbers I try to create.

    so, the attached screenshot, cell D8 has this formula in there...

    SUMIF (C$ 2: C7, ' <>DAILY-TOTALS ", D$ 2: D7" ")

    .. .which I slipped from Re: sets of numbers in a column numbers 3.1 a subtotal

    but when I copy and paste this entire Row8 Row14 & Row18 etc, there is a TOTAL of all column (less than the line with the text "DAILY TOTALS" in them).

    is it possible to make the SUM of the lines in the same day? or in SHORT all lines since the last "DAILY TOTALS?

    or, is there a way to better/more easy to make this whole process?

    Thank you :-)

    You might consider having a table of gifts and a separate daily summary table, like this:

    In column A, indicate you the dates.

    The formula in B2, filled and right at the bottom, is:

    = SUMIF(donations::$A,$a2,donations::D)

    SG

  • How to remove "Ghost Audio Files" on the iPhone 6 s, iOS iTunes 12.3.3 9.3.1

    I have a Windows PC with iTunes 12.3.3 (latest version) and iOS iPhone 6s 9.3.1

    Struggled recently with iTunes think I have music on my iPhone when I don't really have the music on my phone, where the name "ghost files". I tried several other sites have suggested to do such as:

    • Download iFunbox and deleting files ghost
    • Delete all the music on the iPhone via settings > general > use > music and remove all the
    • Reset iPhone, worked, but only temporarily
    • Using another cable from Apple lightning
    • Download and run iExplorer

    Also posted a topic before, that brought me to the awareness that the audio files are on my iPhone but not appearing is not in the music app. Please read through this topic, I gave a lot of General information here that's not going to be written on this topic.

    So I just spent the last 2 hours synchronize music on my iPhone and just got "erased".

    I checked iTunes my iPhone Summary tab at the bottom, and it shows all the data for the files of music, which is very weird. I have since tried the music I want on my phone via iTunes, but it is not just sync to sync. iTunes behaves as if the files are already on my iPhone.

    A final problem that can have an impact on the music that is on iTunes next not all but some of the songs that I used on my iPhone have a! on the inside of a circle to the left of the song.

    Bump

  • How is it all my appointments in the calendar as a whole has been deleted on my new 128 GB Iphone 6 S more?

    How is it all my all appointments in the calendar were removed from my new 128 Gb Iphone 6 S more?

    Hey kow237,

    I understand that you do not see your calendars on your iPhone. Let's see if we can understand what is happening.

    The question you are asking is difficult to answer because I don't have much information to go. It could be that calendar events were not deleted and just not to run. You can see what calendars appear on your iPhone in the calendar app. Another suggestion would be to check to settings > Mail, Contacts, calendars and look at the account and make sure that the schedule is enabled.

    Use multiple calendars
    http://help.Apple.com/iPhone/9/#/iph3d1110d4

    Let me know if it helps

    Take it easy

  • How to import all times - not only the role of the iPhone camera?

    My hard drive with all my photos are dead. Fortunately I've stored them all on my iPhone. However when I go to import Photos to Mac I can import only photos taken on the device. How to import all times?

    However when I go to import Photos to Mac I can import only photos taken on the device. How to import all times?

    Your photos have been synchronized to the iPhone via iTunes?

    Then the mac cannot import photos from iPhone photos.  Synchronized pictures are not stored in the camera.

    Apple recommends to retrieve the synchronized photo sharing by e-mail.

    Sync photos to your iPhone, iPad, and iPod touch in iTunes - Apple Support

    • You cannot re-import photos synced from your computer to your device to your computer. You can only import photos from your device, or record, in your device to your computer. If you need recover photos synced from your device, send photos of the unit yourself. Then download the photos from the emails on your computer.

    It is heavy, because you cannot share multiple photos at once.

    Look for a third-party application that allows you to transfer pictures, for example http://www.wirelesstransferapp.com/

Maybe you are looking for