How to 'hide' a single stroke behind the other object?
I'm struggling with something that shouldn't be this difficult!
I'm planning a logo white T-Shirt only (to go on a dark green T-shirt)
To simplify, let's say I have two ovals with no fill, just a white line. A small oval overlapping (sur-haut of) the part of the edge of a larger (oval below). I have
Any advice on how to 'hide' the line which is "behind" the top object?
As follows: http://i.imgur.com/ZghWTMa.jpg
Actually, I'm not completely sure yet.
Response to Steve assumes silkscreen with a single opaque white ink. It will not work if the composite impression not opaque transfers or cut out the vinyl applied, or if you import the work of two-ellipse for combination of other works of art.
Because you do not know:
1. draw two circles with a stroke color and fill color (ex: feature black, white fill) on both.
2. apply the weight of the desired race.
3 object > path > describe stroke.
4 pathfinder palette: merge.
5 white pointer: select both within the regions and remove.
6. you now have a single compound path; None of the objects that overlap and real 'holes' where you want the substrate to show through. Applies regardless of the fill color (white, etc.) that you need.
But keep in mind what has already been said: white, unless it is defined as a spot color, does "not print." Think in terms of inks, not in terms of 'color '. In a program like Illustrator, 'white' normally means "no ink". And we must always know what printing method that you design.
JET
Tags: Illustrator
Similar Questions
-
How do you put one layer behind the other part?
In photoshop, I am doing a logo. I want the ends of each "S" in this image to go in the other, but I don't want the whole S behind the other. How can I do this?
Add a layer mask by clicking on the mask icon in the layers panel. Ctrl/cmd click on the layer icon to make a choice:
Ctrl/cmd-alt/opt-shift-click on the icon to the other layer. Will you limit so the selection just areas exceeded shape both knees. Select the layer mask, and with a paint brush of black paint on the areas you don't want.
-
How to clear a single block of the current page in the OPS
Hi all
How to erase a single block of the current page in the OPS. I used the CLEAR key.
Thank you
Hello
I found the solution I wrote it in the button DELETE. I wrote the remove with vo1.setMaxFetchSize method (1);
and remove called AOS
Thank you
-
How to start a single group in the remote computer to the machine master
Hello
I want to know the command for any machine remote master boot of the machine and how to start a single group for the remote computer to the machine master.
Thank you
AmitYou can start all of the remote machine (after you start the master of the machine) as follows:
tmboot b
-l . For all available options tmboot see http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rfcm/rfcmd.html#wp1032112
Kind regards
Malcolm. -
In Labview, is it possible to put two windows (both sides) appears on the same screen together, one behind the other, during run mode?
It's a shame
Secondary, it's a great way to call subVIs and you load only code when you call it, so it ease your use of resources.
Anyway, you can call Vi as pop up:
https://decibel.NI.com/content/docs/doc-2064
You could split your FP using the separator.
http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_splitter_bars_and_panes/
Or you can use the control tab.
http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_tab_controls/
Regars.
-
Using Acrobat Pro XI to make PDF documents compatible 508. I had a number of questions went using Add Tags to the document option, it is one object behind the other or remove them all together. Also had problems when you try to adjust the reading direction, content is moved or deleted. This PDF file is created from InDesing CS5
Someone knows what I'm talking about or have any ideas on how to fix it? Thank you
Content should always be deleted by adding tags, but it can appear so because - as you note - objects can hide behind other objects. In theory, you can bring out them of hiding to rearrange things in the part of the order, but I have much more luck using the content pane - it provides a level of much finer control. If the text is hidden behind a shaded box, for example, I'll move the box over the text in the content order, then usually convert the box to an artifact if it is already.
I hope this helps.
a 'C' student
-
I managed to remove the icon to display all open windows one behind the other.
I managed to remove the icon to display all open windows one behind the other. Where can I find it now?
Also, my laptop keeps getting an error when I try to restore to an earlier date and told me that it is impossible to complete.Hello
Which, in my view, that you have a problem with, it's called windows Flip 3D!
Try this first and see how you go...
- To turn on the Quick Launch bar, follow these steps:
- Right-click anywhere on an empty spot on the taskbar.
- Choose toolbars from the menu that appears.
- Select Quick Launch in the following menu so that it is checked.
You should then be able to click the icon to switch between Windows now and use the 3d Flip...
Or
. Right click on the Quick Launch toolbar, but not on an icon
2. Select the folder from the context menu. It will take you to the Quick Launch folder that should live:C:\Users\username\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch
3. right click in an empty area of this folder
4. Select new, then shortcut from the context menu
5. for the location text box, enter the following text:C:\Windows\System32\rundll32.exe dwmapi #105
6. click on the next button
7. appoint. (Flip3D, for example)
8. click on finishThe shortcut will now be in your Quick Launch toolbar.
Concerning
GT4U
-
How to display picture three one on the other
Hello
I want to display three picture (same size) on one single screen on the other. Normally in this case in the foreground image will appear.
But I need to see all images.
How can I do? Does anyone have an idea?
Thank you in Advace
I don't know why your way does not work (and it does not work for me as well), but it seems that there is another way:
image1.getARGB(dataFullScreen, 0, size, 0, 0, size, size); image2G.drawARGB(dataFullScreen, 0, size, 0, 0, size, size);
It works at least on my 4.2.1 simulator ("size" here is a const for 200)
-
Laptop is dead, how is it, I can still type the other letters?
original title: im sry! :/ so the keyboard of the laptop is dead? How can I solve this problem?
im SRY! :/ so the keyboard of the laptop is dead? How can I solve this problem?
But if its dead, how is that I still can type the other letters?Thank youEach key on the keyboard has its share in the circuit without dependence on the other keys. Just because someone broke a window in your home does not mean the rest are too broken. ;-0
Get the keyboard repaired/replaced.m last time I did it for one person (replaced a laptop keyboard) it took 20 minutes to actually do it-most of the deletion of a lot of small screws and a conservative to avoid losing. (Not counting the delivery the day 2 of the replacement keyboard.)
What brand / model of the laptop?
-
How can I share 'My images' with the other user accounts on my computer?
How can I share 'My images' with the other user accounts on my computer?
where are the 'experts' on these forums adverstised? I can't get an answer to a simple question. Does anyone know how to do this?
Here we are, ok, I'm not an expert, but try this:
Right click on 'My images' > share > specific people... > select that you want to share this folder with.
...
After that, try to connect by using a different account. If you will not be able to open C:\Users\"FirstUser"\Pictures, you try to extend the network in the left pane of Windows Explorer > expand ComputerName > expand users > expand "FirstUser" > photos
-
How to hide half of the circle that runs behind the other circle?
I did this planet and I want his ring to watch as it turns around him, so that the upper part of the ring must go behind the actual planet! How can I do? Also how can I add volume on the ring to make it look a bit more realistic?
Image:
Hello cyanide.
Looks like you used the appearance 'expand' in the menu object?
-
How to show/hide a single component of the form on valuechangeListner
Hello
I want to show/hide on move down according to the value of the selction of value in the other fall down. However, when I change the value lower down, the GET refreshed and the entire domain in the list drop-down and entered text is empty. Can you please help me with this?
I want to show/hide the drop down to "Business Unit" based on the value selected for "Type of application" and the data for the remaining element must be populated.
Here is the code<af:panelFormLayout id="pfl2"> <af:selectOneChoice label="Order Type" id="soc2" required="true" validator="#{lovManagedBean.orderTypeValidator}" binding="#{userAuthentication.orderType}"> <f:selectItems id="si2" value="#{lovManagedBean.orderTypeItems}"/> </af:selectOneChoice> <af:selectOneChoice label="Request Type" id="soc1" required="true" validator="#{lovManagedBean.requestTypeValidator}" binding="#{userAuthentication.requestType}" valueChangeListener="#{userAuthentication.requestTypeValueListener}" autoSubmit="true"> <f:selectItems id="si1" value="#{lovManagedBean.requestTypeItems}" /> </af:selectOneChoice> <af:selectOneChoice label="Request Geo" id="soc3" required="true" validator="#{lovManagedBean.requestGeoValidator}" partialTriggers="soc1" binding="#{userAuthentication.requestGeo}"> <f:selectItems id="si3" value="#{lovManagedBean.requestGeoItems}" /> </af:selectOneChoice> <af:selectOneChoice label="Business Unit" id="soc4" required="false" validator="#{lovManagedBean.businessUnitFlagValidator}" binding="#{userAuthentication.businessUnitFlag}" visible="#{userAuthentication.requestType ne 'Credit Memo'}" partialTriggers=":soc1"> <f:selectItems id="si4" value="#{lovManagedBean.businessUnitFlagItems}" /> </af:selectOneChoice> </af:panelFormLayout>
Hello
cut,
,,Tags and it should work
but I recommend that you rewrite your page as regular xml (.jspx) to avoid the 'strange' behaviours ;)example:
Kind regards
BranoPublished by: Branislav Nemec on June 2, 2011 20:33
-
How to create a transparent Stroke in the text?
I try to create an inner border around text which is completely transparent. There is a line under the text that shows through. I want transparency through this line. It is a T Shirt and I need the color of the shirt to show through.
The thing with piercing group, is have you group your text with your underlay.
If it helps to look at the example file I was working I, here is a link to dropbox.
There are two instances of the file - the other is not properly positioned external race, but you can rip it apart to see how it's done.
-
How to hide a multiple selection of the TableRegion element dynamically
Hi all
I have a requirement to hide the column multipleselection area of table dynamically. Based on the id liability multipleselection column must be disabled or hide.
I gave the following code to set the fake rendered property.
OATableBean tabBean = (OATableBean) webBean.findIndexedChildRecursive ("SearchTable"); Salt of OAMultipleSelectionBean = (OAMultipleSelectionBean) tabBean.getTableSelection (); sel.setRendered (false);
But it's not working. Someone help me in this.
Thank you and best regards,
Myvizhi
Hello
Try using the code below:
(I found this on the blog of Mukul
Hide Multiple selection
OAAdvancedTableBean tabBean = (OAAdvancedTableBean) webBean.findIndexedChildRecursive ("[table item id]");
Given that multiple selection is at the end, get the total-1 to remove
int count = tabBean.getIndexedChildCount (pageContext.getRenderingContext ());
System.out.println ("number of children" + count);
tabBean.removeIndexedChild(count-1);
Sushant-
-
How to hide a clip (mc) when the. Open SWF files?
Hello
How to hide a clip (HideMe_mc) who is on stage, when I opened my. SWF file? The user can display it whenever he needed.
I am using Actionscript 03: Please help me with the code.
Thank you.
In the first train where HideMe_mc appears that you can use...
HideMe_mc.visible = false; Use true to make it appear
Maybe you are looking for
-
iTunes scrambles the reading order when copying.
I have all the stuff to shuffle is turned off. It is reading something wrong, and I don't know what it is. Never happened before.
-
Problem with the HP DV7-1240US driver Page of Support
I'm posting here in the hope looks at this HP and was told what is happening. My laptop in question presents an Atheros wireless card in Device Manager. However, when I went to look for the drivers under Vista 64-bit (I currently use), he mentions a
-
Updating BIOS for Acer Aspire 3000 / battery problems
So I had a couple of Acer Aspire 3000 who were not working and got one to work... But it seems that I am having some problems when the battery is in it - and otherwise fine without him.Excessively long Shut Downs that go to the continuous reboots / T
-
We could not find the runtime to run the application?
Whenever I try to run some programs on my PC it comes eith an error of initialization of the .net framework, and in this window, it says cannot find the runtime to run this program, how to fix?
-
Problem with the display of a video frame in Windows Media Player 11 on Vista
Hello I am having some problems with the Windows Media Player 11 on Vista. On my XP machine, when I discovered a video frame by frame, it works perfectly back and forth. However when I try to play the same video on my Vista machine, the button to the