How to hold the pick is or the Valley?

Dear all,

I have a wave sampled, then I want to detect the peak of points (or points of the Valley) and hold the point until the next Summit points (or points of Valley) will appear.

Now I can use the example of 'Pic Detector.vi' to get the points that I want to.

But I don't know how to put the data in the chart. The attached picture shows the idea that I want.

If you need more information to solve my problem, please tell me, thank you very much!

Hello

Here's a way

detection of all indexes of photos to build the parts of the table with each min/max value then assemble

tell if it works

Concerning

Tinnitus

Tags: NI Software

Similar Questions

  • How to hold the safe HARD drive in the Ultrabay HARD disk adapter

    http://0RZ.tw/hCi4T

    One of the things that I like most my ThinkPad is the Ultrabay. The Ultrabay is by default occupied by the optical drive, but the optical drive can be removed and replaced with a hard drive adapter, a battery or a serial port/parallel adapter. The question always seems not to exist but the disc adapter hard ultrabay is fit to several models. When I insert the ultrabay adapter in my R400, I found that there is little space between the ultrabay and the computer. It is annoying because you have to worry about dust. But the biggest problem is, HARD ultrabay drive adapter could not hold the HARD drive safely! As the photo above, I show the adapter and the HARD disk is connected and hold by the junction! So if submit you adapter to a lot of movement, the drive connector can easily get damaged. Is there a solution to help?

    Hi, the drive HARD Ultrabay adapter is designed for the drives own Lenovo coming w metal a little "shopping cart" mounted around the disk hard with four screws. The adapter is slightly too big. Unfortunately Lenovo does not have shopping cart available as a spare part for use with non-Lenovo disks. In this thread a seller in the United States is listed by selling the caddies and my positive experience with him.

    Of course the caddies made US make unnecessarily expensive. It would be great if you could find a supplier selling these carts located in your geography at a more competitive price. Be sure to post your experiences here, if you manage to find one.

  • How to hold the Transaction BPEL

    I need to hold the transaction flow bpel until the date stated in the XSD application. is it possible.
    It should be like a dynamic wait until time.it is possible with the waiting activity but there are options

    use choose the activity and onalarm management, or create a human task and wait until the task expires and then start the treatment

  • How to hold the output % 3F

    Hello

    I need to hold my output for a while for example of 10 sec. My result is boolean. I have attached a VI to collect my problem. When X or Z is true it has to hold for 10 sec. It is not applicable for Y. Please give me an idea how to do this.

    Rgrds-

    Taslim.

    Hi Manon,.

    the attachment shows the quick & dirty...

  • How to hold the text after animation application

    Hello, I'm having a problem with the text animation.  I want the text of "bland in online", but then keep the text on the screen.  As it is now, the whole of the duration of the text on screen is taken up by the animation itself.  I want that line fade, and then stay there. Then I want to fade in the next line, and that a stay as well; and so on.

    I know that you can only apply an animation to a single line at a time, but how are you just 'holder' static text once the animation is complete?

    "Predefined animations" are quite simple and only allow a certain degree of customization. When they do what you want, they are saving time, but when you need more, manual Keyframing (usually fixed effect > Motion > Position) will allow much more control. As I always want more that that intended by the preset animations, I don't remember the last time I used a. Instead, I have Keyframe point > Position and get everything I need.

    Steve Grisetti has a beautiful series of tutorials on Keyframing most of the effects on the Muvipix.com. I don't remember if they are in the free tutorials, or if you need to subscribe to Muvipix.com to get these. Keyframing is a powerful took and is available for most of the effects well beyond the fixed effect of the Motion, opacity, Rotation, etc... Keyframing learning is well worth the effort, because of their power and their control.

    Good luck

    Hunt

  • How to hold the canvas size constant?

    When I scale upwards, the area of the original image is hidden by enlargement.

    In fact, enlargement covers everything and goes to the edges display pane.

    I want to keep seeing the same canvas size.  I am also

    worried that the output size and the area will be changed now.

    Anyone?

    Thank you

    Steve Z denver

    Yes. You can actually remove the clip you can create the new sequence, and then click anywhere in the timeline on your original sequence, then Ctrl / Cmd + A to select the entire document and copy and paste it in the new sequence.

  • Hold the head of reading for a few seconds, and then go

    Hello world

    How to hold the head of a frame for a few seconds and then have the read head continue to play? I don't know how to do this in AS3.

    Thank you

    Rafa.

    These things indicate (to me), you have done a good thing and studied the help files for how to use the function, although you may have considered in the section of AS2.  In addition, get rid of them.  They are specific to some example were the help files.  The bit in quotes is an argument that would be sent to the function, which receives it as arg1.  I can only imagine that one of the mistakes was to not to declare the type of argument, that requires AS3, but like I said, just get rid of them altogether.  For AS3, things are slightly different, the return value is a uint

    Stop();
    var setHold:uint = setTimeout (holdPlayhead, 2000);

    function holdPlayhead () {}

    gotoAndPlay (26);
    }

  • How to type the symbol of the hashtag # on the keyboard of apple for iPad pro? When I hold the shift and 3 I get a book signing £

    How to type the symbol hashtag on iPad using the Apple pro keyboard?

    When I hold SHIFT and press 3, I get a sign £.

    Thank you

    Go to settings > general > keyboard > keyboards > keyboard hardware and make sure that it is set in the United States or ABC and not the British.

  • I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

    I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

    Select the iPod in iTunes (click on its button on the device on the horizontal bar) to show its settings screen in the iTunes window.  The side left (in the sidebar), under settings, click music.  To the right, the settings screen of music from iPod, where you tell iTunes how to sync songs to the iPod.

    NOTE: All of the songs on the iPod that are not in your iTunes library (on the computer) will be lost.

    Check the box to Sync music (if it isn't already).  Below, choose the option synchronize playlists, artists, albums, and genres.  Below, under playlists, select (check) the playlists you want on the iPod.  You can also select other articles on other lists, as you wish.  Click Apply to sync your selection to iPod.

    Further, iTunes automatically updated the iPod with the changes made to the selected part of the iTunes music library.  For example, if you update a list of selected reading (add/remove songs), updates iTunes, the iPod with the same changes the next time you connect (or click Sync if already connected).

  • My toolbar disappeared and only comes at the time when I hold the cursor at the top of the screen. How can I get it back?

    My toolbar that since always on on my Windows screen simply ceased to appear and it comes at the time where I keep the cursor at the top of the screen.  How can I get it back?

    You have clicked on full screen. Hold the cursor at the top and drag it to the right along the toolbar and click on the restore button which is the button (enlarge/restore down) between narrow it down and close.

  • I did several back ups on my computer and I wonder how many of the discs that I have to hold. Can I get rid of all except the last backup?

    I did several back ups on my computer and I wonder how many of the discs that I have to hold. Can I get rid of all except the last backup?

    Thank you

    Scott

    Hi Scott,.

    You must keep all 10 backup.the disk new backups will contain only the last backups and will not have the previous backups.

  • How can I hold the public IP address on a specific profile on the asa 5510

    Hi guys

    How can I hold the public IP address on my session NAT VPN cisco customer for no one else can use it? I have a cisco ASA 5510

    the Interior is 172.10.20.86

    public 166.245.192.90

    Need to call my ISP?

    Thank you

    Sorry to say but your qustion is not very clear. Can you please post what you are trying to achieve?

    Thank you

    Ajay

  • Fresh paint: how to use the color picker

    Hello, I just bought a computer laptop touch screen today and installed the fresh paint. When you try to use it, I can't understand how to use the color picker. Help?

    Hi Katherine,

    Thanks for posting your query in Microsoft Community.

    You can see the Support Microsoft article below that provides a brief description on the wet paint.

    Fresh paint FAQ...

    I hope this helps.

  • How to make the slideshow to work and how many seconds can I hold the blade during?

    I need to get the slideshow to work and I can't not to understand and second how can I hold the blade during?

    You can adjust the speed of transition to the slide where the speed will determine the change on slides. Alternatively, you can configure CV after which held the blade until the set time in recovery after to complete the loop.

    Thank you

    Sanjit

  • How to get the RGB color values on the color picker component?

    How to get the RGB color values on the color picker component?

    trace (cp.selectedColor);

    Returns something like:

    16750950

    trace (key2cp.hexValue);

    Returns:

    ff9966

    I'm looking for RGB, for example, 0.5 0.5 0.5, corresponding to a gray color.

    Is there a chance that the RGB settings are hidden somewhere or is there a conversion function at least?

    Thank you.

    If key2cp.hexValue returns a string like 'abcdef', use:

    var s:String = key2cp.hexValue;

    var n: Number = Number("0x"+s);

    var r: Number = n > 16 & 0xff;
    var g:Number = n > 8 & 0xff;
    var b:Number = n & 0xff;

Maybe you are looking for