How to ignore the 'aspect ratio' by creating a rendering custom through BOVINE infectious rhinotraecheitis
Hello people,
Ive set up some custom interpretations which are mainly based specific size and IBR is able to generate the most selected.
But it ignores the specified height or width based on the best fit and creates a record in maintaining the proportions .
No idea how to force the BOVINE infectious rhinotraecheitis to create a 100 x 100 or any what 'specific' rendition of combination of height x width?
Ive configured ootb engine for rendering, not any external engine.
BTW its WCC 11.1.1.8
Kind regards
Pradeep Mahajan.
http://ucmchronicles.WordPress.com
Instead of graphicwidthlimit and graphicheightlimit, use graphicwidth and graphicheight in this rendition file and test the output of the image.
Tags: Fusion Middleware
Similar Questions
-
How to change the aspect ratio of pictures
I use iPhoto to create a slide show that is exported to a MPEG-4 file and burned to a DVD. It is not possible for some of the photos to crop to a ratio of 16:9, so I thought I could use Photoshop to change the proportions. Here's what I did:
- Photo open in Photoshop
- Select Imageecurrent height and size of the note. Multiply the height of 1.77.
- Enter a new dimension with the same height and width calculated in step 2. Leave the box checked for parent.
- Optional: change the extension of the zone.
- Click OK.
- Configure tool Selection Rectangle Fixed Ratio style with a width of 16 and a height of 9.
- Use the Marquee Selection tool to select photo from top to bottom, which will leave an extra canvas on the side. A purple guide line appears when the top and the bottom of the photo match exactly.
- Move the selection area so that the sides are evenly spaced. A purple guide line appears when the photo is exactly centered.
- Select ImageeCrop.
- Select fileeeQuick Export to JPEG export.
- Save the photo. Confirm that you want to replace it.
- Select file closeeand validate without saving.
These new images seem to create when they are imported into the slide show, but when I export the slide show as a MPEG-4 video file, each photo that has been resized in Photoshop displays as a blank, black slide. Is there something I'm doing wrong that corrupt these images and made them unreadable? Any help would be appreciated. Thank you.
PS - I use Photoshop CC (2015) on a Mac.
Just use the crop tool.
In the Options bar set Ratio and put 16 in the field width and height 10. Do not specify steps and units.
Make sure the background color is black and drag the crop tool in the image.
When he arrives on the edges, keep dragging, and any extra fabric created will be black.
BTW, I don't know how it works with the Mac systems and apps like speech, but PowerPoint in Windows is a PITA when it comes to changing the proportions. One might think, it could be done in a few clicks, but you need to change the size of the Page, then go to each image in turn and reset it, and then drag to fill the screen. And yes I realize that you produce a DVD to watch on a TV. Windows uses applications like ProShow Gold and professional for that. I've never used them (I use Premiere Pro) but I recently had a short play with Proshow Gold, and I was very impressed.
-
CS4: Resize raw images and maintain the aspect ratio
I have a few images in full HD 1920 x 1088 or what it is, and I need to put it in a film where everything is in the resolution 1040 x 584, is it possible to reduce the resolution while keeping the proportions? All files are. MOV that I like to keep, but if it's the right size. AVI, that's fine too.
When I try to export a single clip on first, the aspect ratio is lost and I've tried several programs of video conversion in the last two days, none worked for various reasons, the resolution that I needed was not available, would not work the file after conversion, first does not recognize the file, the aspect ratio has been lost etc.
Can someone help me out here please?
Use the option to scale the motion effect.
-
I can see where to change the format of image in Live Mode, but I can't see the options for the movie on the 5 d mark iii mode.
Hi dhooser!
Thank you for posting.
Video Full HD is shot at a resolution of 1920 x 1080, which is an aspect ratio 16:9 fixed. Standard definition video is shot at a resolution of 640 x 480, which is a fixed ratio of 4:3 aspect. This cannot be changed as it can for still photo shooting.
-
How to ignore the validation of the ADF LOV
Hello
I have worked in oracle forms and now try to learn the ADF.
In oracle forms, if we apply LOV to a field, it offers the possibility that we validate this filed of LOV like it or not. If we set ENTER FROM LIST = No., user can select LOV value or it can enter the value manually (and this value can be or not be in LOV).
Now in JDeveloper 11.1.1.5.0, I have attached a list of input to a values it was filed. Any value I put in the deposited ADF framework, trying to validate of LOV, and does not update the model compared to invalid values. How can we ignore that?
Infact, I have an obligation if the value does not exist in LOV, I create this value in the object instance on which rests the LOV. In doing so, the value will now be a valid value.
Published by: student of oracle on 25 May 2011 23:57
Published by: student of oracle on May 26, 2011 12:02 AMYes, I agree. However, this might give you an idea how to make the scenario using a manual coding
http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/69-custom-lov-with-BTF-276178.PDF
Frank
-
How to ignore the error S.M.A.R.T. for El Capitan update?
I have a disc with a Smart error. In my particular case, I know that it is relatively safe to continue to use my drive. I have error SMART attribute #173 (level of wear), but all these block replaced is arrived in the small volatile temp score, my main system partition is sure. In short, I know what I'm doing.
I want to ignore this error and to force the update. How to do this?
If you think it's worth, you can try to format the drive. I don't know any way to force the installer to ignore the error.
-
I use lv 8.5 and teststand 4.0.
I did a step type custom and recorded at the MyTypes.ini in pallets of type.
I specified a default module by opening the properties of the custom step of *.ini type window, then I put some values of the parameters.
T1) when I open teststand and I add the custom step type manaully in seq file, the labview module parameter values are represented.
But, if to use file (create and add support prototype stage), the labview module parameter values has the default value.
Using joint file, how to get the setting custom step type values I put in *.ini?
Q2) each type of step are automatically by name through the use of LoadTypePaletteFilesEx. When I open teststand and I add the custom step type manaully in seq file, the module is loaded automatically. Inside the attachment, I use a prototype of charge and a fixed path where the module labview is to load the labview module.
Can I load module automatically without using a prototype of charge or how can I get a dynamic path of type step?
I solved Q1 for myself by using the mapping tab of the parameter within the configuration to the default module window.
Everyone knows Q2?
Thank you.
-
How to handle the onTriggered many ActionItem created dynamically
Hi, I created the ActionItem dynamically using (loop)
because data is from webservice
How to handle the onTrigerred?
If my code is like this:
for (int i = 0; i)< alist.count();="">
{
My page page * = iRoot-->
findChild ("SpecificObject");
ActionItem * action = ActionItem::create () .title (aList [i] .name);bool res = QObject::connect (action, SIGNAL (triggered ()), this, SLOT (handleAction (())); what I'm confused because I don't know what action is triggered
Q_ASSERT (res);
Q_UNUSED (res);my page-> addAction (action, ActionBarPlacement:efault);
}
MyClass::handleAction() Sub
{
aFunction(); This parameter of function required of aList, said user.user aList [i]
}
Do I need to create handleAction() as well as added actionItem SLOT
But I don't know how much action added because it is dynamic server
Thank you
There are a few options:
Create a single location and connect all the signals. You can then call sender() into the slot to retrieve the object that sent the signal and go from there. You can also use a QSignalMap that maps each signal to a value and send this value to a single location. You can also use QSignalMap::sender() to get the sender object.
I used the QSignalMap to do something similar for handling created dynamically successfully drop-down lists.
-
How to use the clause type conditionally create new lines
This question is just for learning - no object other than to start real world to create versions of some queries known to learn how to measure the performance of the MODEL clause clause of the MODEL versions.
The question is: How can you write a STANDARD clause that pivots (updates) ONLY the lines that actually need to rotate and do NOT change the lines that have no value and cannot be rotated.
I found a good site that has about two dozen example articles on different pieces. This first link is the beginning of the series.
SQL features tutorials - Clause TYPE
http://www.sqlsnippets.com/en/topic-11663.html
This link is to a clause of FAQ of BluShadow MODEL version "how to convert rows to columns."
Line - MODEL method string
http://www.sqlsnippets.com/en/topic-11987.html
The solution to this link uses this line of source:
POSITION KEY VAL
--- ---------- ----------
R08 0 v1, v2, v3,.
and this result set:
POSITION KEY VAL
--- ---------- ----------
R08 1 v1
R08 2 v2
R08 3 v3
The reason why it produces that result set is this clause of the statement of MODEL
RETURN THE UPDATED LINES
If you comment on this article, you will see that the original lines are all in position 0. This means that the solution reproduced EACH SOURCE LINE even if there is only one item in the list of values.
Thus, even a line source with a single value (for example, the r01 'a') will be updated and updated this line is returned.
For a large number of data sources with only a few lines that actually need to rotate it would be a great performance of infringement.
This is the sample data source
with t as (button 1, 'a' value 'abc' col2, col3 'def' of the double
Select Union all 2, 'b', 'ghi', 'jkl' from dual
Union all select 3, 'c, d, e, 'mno', 'pqr' from dual.
Union all select 4, 'f', 'stu', 'vwx' from dual
)
Select the key, value, col2, col3
tKEY, VALUE, COL2, COL3
1, a, abc, def
2, b, GHI, jkl
3, "c, d, e, mno, pqr.
4, f, stu, vwxLines 1, 2 and 4 only have a value of (a, b, c respectively.
Only line 3 must rotate. It contains "c, d, e" and which must become 3 lines in the result set
Value of the key, col2 col3
1 an abc def
2B ghi jkl
3 c mno, pqr
3 d mno, pqr
3 e mno, pqr
4 f stu vwxThe nut of the problem is that if the clause 'RETURN UPDATED ROWS' is used, then the lines 1, 2 and 4 must be updated in order to be returned in the result set. And if this clause is NOT used, then line 3 must be updated by 'c', d, e 'c' and two new product lines: one line for a ' and one for 'e '.
How can you do this with the TYPE clause without the help of the clause "Return LINES UPDATE"? I don't have a solution to sample showing what I tried because I can't understand what it takes to even try.
I have a solution that uses "RETURN UPDATED ROWS" but I want to compare this performance to the exercise, when this clause is NOT used.
We ask BluShadow to add the solution of MODEL clause to this FAQ with other similar solutions.
Like this?
SQL > with t as
() 2
3 select the 1 key, 'a' val, 'abc' col2, col3 'def' of the double
Select 4 Union all 2, 'b', 'ghi', 'jkl' from dual
5 union all select 3, 'c, d, e, 'mno', 'pqr' from dual.
Select 6 Union all the 4 'f', 'stu', 'vwx' from dual
7)
8. Select the key
9, key_1
10, val
11, regexp_substr (val, ' [^,] +', 1, key_1) val_new
12, col2
13, col3
14 t
model 15
16 partition by (key)
dimension (1 key_1) 17
18 measures (val, col2, col3, (length (val) - length (replace (val, ",")) + 1) as len)
19 rules
(20)
21 val [for 1 to increment of len key_1 [1] 1] = val [1]
22, col2 [for 1 to increment of len key_1 [1] 1] = col2 [1]
23, col3 [for 1 to increment of len key_1 [1] 1] = col3 [1]
24)
25 order
26 by key
27, key_1;KEY KEY_1 VAL VAL_N NECK NECK
---------- ---------- ----- ----- --- ---
1 1 has an abc def
2 b 1 b ghi jkl
3 1 c, d, e c mno pqr
3 2 c, d, e d mno pqr
3 3 c, d, e e mno pqr
4 1 f f stu vwx6 selected lines.
-
Nobody knows how to set the type exposing without creating an odd line spacing
I need how to superscript® for all browsers in Muse. When I use the outlining style, it creates a different spacing on this line seen in Safari or Firefox.
FYI... The latest version of Adobe Muse CC (2014.3) directly supported for exhibitor/index via the text panel. We also ensure that exhibitor/index will not affect the line spacing.
Abhishek
-
How to set the HostDiskPartitionAttributes property when creating Vmfs volume
Hi all
When creating vmfs datastore through vlume
programmatically, I need to partition the vmfs volume. here my question
is an idea how to set the HostDiskPartitionAttributes there is a
parameter to create vmfs vloume. Here I use Vdisk lun san
"that will have the size, raid, stripesize... by this I need to set this.
HostDiskPartitionAttributes ' property.could someone help me please. "
Note: it's links to the document:
http://www.VMware.com/support/developer/VC-SDK/visdk25pubs/ReferenceGuide/index.html
is the method that you need to find CreateVmfsDatastore.
Thank you
As partition is a contiguous series of blocks on a disk that is marked to be used and is considered in each sector of 512 bytes. Must divide the space into sectors and specify startSector and endSector according to your requirement, that the way in which large partition you want to create.
-
How to ignore the trigger?
I had a very simple animation here: http://www.deldesign.de/2013/trigger/
The A - B button plays the timeline. There's a trigger with stop(); to B
The A - C button is supposed to play the scenario while ignoring the trigger.
How can it be done?
Thanks in advance.
Another idea: Boolean variable (symbol of the step).
-
How to ignore the prompt when calling storeUserConfig()?
Hello
WLST, is it possible to bypass/ignore the prompt that you get when you call storeUserConfig()? You must answer y or n to allow/disallow the creation of the user configuration and key files.
--
Thomas IsaksenThomas, I have not tried myself, but an announcement on this forum for a few years there was an answer for WLS 9.1:
Re: How to specify response with storeUserConfig in WLST?
-Dweblogic.management.confirmKeyfileCreation=true
-steve-
-
How to ignore the error in adpatch?
Hello
I'm new to adpatch... an error occurred while adpatch... adpatch said to correct the problem, so that the handler can continue... but metalink told to ignore this error... can someone give me how to stop adpatch and ignore the error? Please give me the procedureHello
This is the link that tells me to ignore the error...
https://support.Oracle.com/CSP/main/article?cmd=show&type=not&DOCTYPE=problem&ID=1066653.1
That's what shows... IMPOSSIBLE: folder jtfdiagresp.ldt worker 3.
What should I do with this worker
If the case is applicable to you, then start a new session user applmgr, source of the env file and issue "adctrl" application, then select (Option 8 - hidden option) and say the failed worker (worker 3) to ignore the work.
Thank you
Hussein -
How to ignore the words using keyboard shortcuts
Using Ctrl + Rt arrow usually ignores the words when you type in a free text box but FF uses this keyboard command to scroll the tabs open. Is - this customizable?
This has happened
Each time Firefox opened
is by typing in a text field
Hi Toy4Rick,
The keyboard to switch to the next tab shortcut is Ctrl + Tab and Ctrl + PG. FF.
See this article for more information: hotkeys - quickly perform common Firefox tasks.You have all the related tabs that may cause the keyboard shortcuts change? Do you have any application for the global hotkeys etc.?
Tell us what you find.
Maybe you are looking for
-
Satellite L670 - 1 DG-can I use a 7200 RPM HARD drive?
Hi all I have a portable Satellite L670 - 1 DG (out of warranty) and I would change the HARD 5400 RPM to 7200 RPM drive.It is technically possible on this machine? Is is necessary to use a Toshiba HDD (or open)? Thanks for your replies.Laurent
-
Pavilion p283tx: Hp Pavilion p283tx 15 very weak Wifi signals
Hello I'm new to the forums of HP. I have a problem with my new HP Pavilion 15 p283tx notebook. I use Windows 10 pro 64 bit and affected by very low wifi signal. It shows me only a single connection with 2 maximum signal bars. I installed the latest
-
What is tray.exe 360?
original title: what is What is tray.exe 360?
-
running Windows 7 to have seven important updates for microsoft office 2003 that none will install due to error 646 code can't find a simple forum solution... can anyone help?
-
Photo as photo screensaver and e-mailing
Photo Gallery uses Outlook to send pictures I think but I use Yahoo for email. Should I copy photo somewhere? How can I take a photo in the library and use it to a screensaver?