How to import a virtual machine of 3.5 to 4.0?

Similar Questions

• VMware 6.5.5 cannot import the virtual machine that uses 2GB "disks of split.

  Hello

  I'm using VMware Workstation 6.5.5 under Win XP. I tried to import a virtual machine that was created by using the option 'Split' virtual disks into files of 2 GB. The import fails and presents a pop-up: ' Conversion Assistant/cannot determine the guest operating system. The log file includes the line "could not find the disk cofortcol3v01 - cl1.vmdk. This file does not exist of course, there are more files cofortcol3v01-cl1 - s001.vmdk, cofortcol3v01-cl1 - s002.vmdk and so on. The machine virtual original (cofortcol3v01) has been created under VMware Workstation 5.1, and it does not under Workstation 6.5.5.

  Is this a known problem in the conversion utility? Is there a work around for this problem?

  Thank you.

  -Phil Anzel

  FYI... VMware Workstation peut import a Virtual Machine that uses twoGbMaxExtentSparse discs.

  The log file includes the line "could not find the disk cofortcol3v01 - cl1.vmdk. This file does not exist of course, rather there are files cofortcol3v01-cl1 - s001.vmdk, cofortcol3v01-cl1 - s002.vmdk and so on. The machine virtual original (cofortcol3v01) has been created under VMware Workstation 5.1, and it does not under Workstation 6.5.5.

  Is this a known problem in the conversion utility? Is there a work around for this problem?

  The problem is that you're missing the "disk DescriptorFile", "cofortcol3v01 - cl1.vmdk" and which is why it's a failure and not a limitation of the Conversion utility.

  Also if you actually had a Virtual Machine created in VMware Workstation 5.1 you can simply run directly under VMware Workstation 6.5.5 without having to run the import command.

  Anyway, if you have a backup that you can recover the file "cofortcol3v01 - cl1.vmdk" then you should be fine and if you have not then a new can be created.  If you can archive (compress) files vmware*.log (usually 4 of them) in a single zip file archive and tied him to a post in response, then one of us will create a new file "cofortcol3v01 - cl1.vmdk", based on the information contained in files vmware.log for you, if you don't know how to do it yourself.

• VCac fails to VCO registerVirtualMachineRequest 'Import vCenter Virtual Machine'

  VCac Ver 6.1

  VCO worm 5.5.2

  VCac 6.1.0.2040915 Plugin

  
  Hi all

  I have an external VCO device configuration and Vcac. I am under some test workflow to get the clones of a virtual machine, and then import it into Vcac so that its life cycle is managed. I'm at the stage where I just test of VCO with the out-of-box plugin workflows. I am able to run a workflow to modify the Vcac without any problem. When I run a workflow 'import Vcenter Virtual Machine' in VCO workflow is completed successfully, but the machine is never added to Vcac. I see these messages below in my journal Vcac. Where it says (my username), this is the value of the user of the identity when I run the workflow. I have admin tenant and tissue rights. What is the purpose of this user identity? I can leave the field blank and always get the same answer, he'll just be blank where is the user name.

  (My username) System.ApplicationException: Access denied to the DynamicOps.VMPS.Security.AuthorizationService.CheckAccess (IdentityToken token, try to String, String group, String tenantId) at DynamicOps.VMPS.Service.ProvisionService.RegisterExistingVirtualMachine (IdentityToken identityToken, Guid virtualMachineID, Guid hostReservationID, Guid hostStorageReservationID, Guid virtualMachineTemplateID, owner of the chain)

  Workflow "RegisterVirtualMachineRequest" failed with the following exception: object reference not set to an instance of an object.

  Any help would be appreciated,

  Chris

  Sean,

  I just got this work, thank you for the business group index. It turns out that my user identity must be qualified full [email protected] to work because our SSO keys out of our ad.

  Thank you

  Chris

• How to move the virtual machine from one cluster to another cluster

  How to move the virtual machine from one cluster to another cluster

  If two Clusters are in the same data center, you could do a 'live' migration or vMotion, if that's the case.   If the virtual machine is turned off, it may be migrated regardless of the data center.

• Import the Virtual Machine Notes to new vCenter 5.1

  Is there a way to import the Virtual Machine Notes to a new vCenter attribute? I am able to export notes to help

  $vm = get - VM | Select Name, Notes

  $vm | Export-csv notes.csv

  but cannot find a way to import...

  Thanks Andy

  Hi Andy,.

  to import the attribute information about the virtual machine in a new vCenter server, you can use the following script PowerCLI:

  Import-CSV -Path Notes.csv |
  ForEach-Object {
    Get-VM $_.Name |
    Set-VM -Notes $_.Notes -Confirm:$false
  }
  

• How to access the virtual machines to different physical network?

  Hello

  I'm new to ESXi, can someone tell me how can I access virtual machines on the physical network existing in case I use different IP classes? Physics of the network by using the class C IPs and I assigned IPs to virtual machines of class A? If it is possible, then, what are the steps?

  In fact, I installed exchange 2010 VMs and also want to access the email accounts of physical network.

  Thank you.

  vmjunki wrote:

  You mean there's no way in ESXi to configure the way so we can access the virtual machines to physical network? without third-party applications.

  Because it is impossible for the various networks IP connect without a router, you must have such a device. There is really no difference in that in a pure virtual or physical environment.

  You might think the ESXi host as a box with one or more servers (virtual) inside and one or more layer (virtual) two switches, just like a small server room. This means you will need to provide the same type of connectivity that you would have to a new server room with machines configured with addresses in a different IP network range.

• Import a virtual machine in ESXI Server

  Hello

  I'm having a problem importing a virtual machine into the ESXi server. I downloaded the folder with the VM and then after the download, I opened the folder in the data store, click on the .vmx file, add to the inventory and then when I go to power on the virtual machine, you receive an error.

  

  Can someone tell me what Idid hurt, actually there at - it a guide step by step somewhere?

  Thank you

  Richard

  for me, I like to use the converter, it works and takes care to ensure that all parts of the VM needrf are transferred into your ESX (i) environment.

  Download VMware Converter, install and convert machine.   Source type is another virtual machine of VMware or VMware Workstation.  Type of destination will be the virtual machine VMware Infrastructure.

• VShield Configuration Manager 4.1 (and how to protect a virtual machine?)

  I have 2 ESXi hosts currently configured in vCenter 4.1.  Before vShield installation Manager, he had 3 vSwitches present on each server; a regular and two distributed.

  • vSwitch0 - connected to vmnic0 - has management and production of network 1 10.168.90.x

  • VLAN 10.1 - VMFN connected to vmnic1 on each host - connects to the private physical network 10.1.x.x

  • VLAN 10.2 - VMFN connected to vmnic2 on each host - connects to the private physical network 10.2.x.x

  After you install vShield Manager in a new virtual machine and then to deploy vShield Zones to each ESXi host, develops a new vSwitch

  vmservice-vswitch - again group of ports in Virtual Machine vmservice-vshield-pg - not connected to any physical cards

  VMS individual vShield-FW created for each host have connected network cards as below

  • Production network normal 1 - VM Network adapter (attached to vSwitch 0).

  • Production network normal 2 - VM Network adapter (attached to vSwitch 0).

  • Adapter 3 - vmservice-vshield-pg network

  I tried to connect my VMs to the network vmservice-vshield-pg in order

  to protect them and place them behiind the firewall.  However, who has

  seem to work, and my VM has lost network connectivity.

  How to protect a virtual machine that needs to connect to the normal production

  Network (on vSwitch0)?  Is there any configuration steps I'm missing?

  What happens if I want to connect a virtual machine or one of its network cards to one of the 10.1.xx

  or 10.2.x.x networks rather than the normal 10.168.90.x network?  What

  additional steps should I make?  The new 4.1 documentation is not

  helped at all, and it seems that the old vShield Zones 1.0 docs are not

  applies to all.

  There is no need to change the virtual computer is connected to the network.

  Just activate/install vShield zones on your hosts and add rules to the vSwitch or data center.

  The virtual machine will be becomes protected if no error is displayed.

• After you import the virtual machines in LM, can I remove VC

  Hello

  I had a couple of machines to import the configuration of another admin... After you import the virtual machines in LM, can I remove the virtual machines, I imported VC? I now have more need to fight them with VC. LM depends on of these always after import?

  I do not believe, but you can rename the folder and see if something is complaining.  If it isn't, it is probably safe to delete.

• How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  Joshua Smith

  Are you referring to the evolution of the virtual machines network portgroup of one to the other and in your case potentially issue on to another vSwitch? If so, take a look at this script: updateVMPortgroup.pl everything you do really makes a call to ReconfigVM_Task() and passing in a specification change and put to day the network in which you want to change

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• How to make the virtual machine in 64-bit with VMware6.5

  My CPU: AMD Turion 64 * 2

  Operating system: Windows xp 32

  Question:

  I want to run Open solaris 2008 which is 64 bit, I did a virtual machine but it is 32-bit. You tell me how to make the virtual machine in 64 bits in VMware6.5, I really appreciate.

  Yes.  Power off the virtual computer.  Change the settings.  Change the guest OS to Solaris 10 to Solaris 10 64-bit.

• How to export/import a virtual machine with ESXi 5

  I use the free version of ESXi 5 and have created a virtual machine that is configured with the software for our project. I would like to share this virtual machine with other members of the team, some of whom are in other places and have slow network connections.  I want to pack the VM in a reasonable size file or a set of files I could ftp (or put it on DVD for people in areas of slow network) that they could then import into their ESXi hosts. The virtual machine has a 60 GB drive that is implemented by using the option 'thin', so it contains only 6 or 7 GB of real data right now.  Is it possible to export the image to a file or set of files that can be imported to another people ESXI host?  Before when I used VM Player we could do this by upgrading backup files in virtual machine directory and copy them to the new machine. With the ESXi data store, I don't know that something like this can be done.  I used vCenter Converter to convert to ESXi Infrastructure VM in VM Player format (and vice versa), but it is extremely slow. I think I might point the Source to my ESXi host and the Destination to a co-workers ESXi host and run a 'conversion' to transfer the files, but I think it would be very slow and impractical for some people to 'slow-network '.  I tried with vSphere Client navigation data store and I see the download options, but when I tried to download a VM directory it just hung.  I enabled ssh on my server ESXi and I found the store of data under/vmfs/volumes and when I look in the folder that contains my VM, there a file myvmname - flat hard which is 60 GB in size, so if I tar the contents of this folder to move elsewhere it will be huge.

  Can anyone suggest a solution?  The licensed version of ESXi would offer better alternatives?

  You can watch export OVF available in the Client vSphere for this function.

• How to import a virtual of ESX from Vmware workstation machine

  Hello

  I have to move a VM ESX 3.5 to vmware workstation. Is there anyone know how to do this?

  The ESX server and workstation are different network location.

  Thank you!

  LAN

  Simply copy - Workstation can run virtual machines created with ESX - there is really NO need to torture this innocent VMs with converter

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• How to activate Java Virtual Machine (JVM)? I updated yesterday and somehow, he found himself distraught.

  I've upgraded to the latest version yesterday and when I went to a website of the Government today, it tells me that I have no access until I have activate the Virtual Machine (JVM) Java. How can I do this? (I access this site using Internet Explorer - but I prefer Firefox)

  If you upgraded from a version of Firefox before Firefox 3.6, the Java version you have installed is not recognized. Firefox 3.6 and later versions require Java 1.6.0.10 or higher; you have Java 1.6.0.05

  Other topics: ~ ~ Red: you have installed the plug-ins with known security issues. You must update them immediately. ~ ~

  Java Update: your 1.6.0 ~ ~ red:05 ~ ~ worm. ; current version 1.6.0.20 (important update 15/04/2010)
  (~ ~ Red: Firefox 3.6 and above all requires Java 1.6.0.10 or higher ~ ~; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
  (Windows users: do the update manually, very easy.)
  ~ ~ Red: check your version here ~ ~: http://www.mozilla.com/en-US/plugincheck/
  See: Java Update
  Do the update with Firefox closed.
  NOTE: Java version 1.6.0.21 was released. It is mainly an update for developers of Java applications and most of the users don't need to worry about downloading version 1.6.0.21. Right now, the option of update in existing Java 1.6.0.20 facilities are not updated to version 1.6.0.21. right now, it must be manually downloaded and installed. According to the release notes for Java:
  "Bug fixes ".
  Java SE 6 Update 21 contains no additional patches for vulnerabilities to its previous version, Java SE 6 Update 20. Java SE 6 Update 20 users have the latest security patches and don't have no need to upgrade to this version is current on security patches. " Source: http://java.sun.com/javase/6/webnotes/6u21.html

• Import the virtual machine template in vCenter Lab Manager?

  Hello

  I want to import a virtual computer model in vCenter Lab Manager. I can import the whole machine, but how to import from a certain snapshot?

  Rizwan

  Yes, then you will need to "reach" the point manually before cloning each point.

  Kind regards

  Jonathan

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.