How to improve the sampling rates high in samples mega 3rd spartan Board

Similar Questions

• How to increase the sampling rate in this VI?

  Hi all

  I have recently inherited this mess of a VI and can not figure out how to increase the sampling rate. I tried to change the "ms of waiting ' clock, but it does not add more data points." The main VI, as well as the Subvi, which contains a Daq Assistant to a load cell and LVDT is attached. Any ideas on how to improve the sampling without a complete overhaul would be greatly appreciated!

  Thanks in advance!

  If you are grateful, feel free to give congratulations and mark the topic as resolved.

• How to calibrate the heart rate monitor?

  How to calibrate the heart rate monitor that shows a too high concentration?

  Hello

  It is not possible to calibrate the heart rate sensor. However, various factors can affect the performance of the detector.

  During training, to optimize the performance of the heart rate sensor, ensure that you wear your watch fits on top of your wrist.

  Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.

  The sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements (e.g., tennis). Other problems that can affect the performance of the sensor include the perfusion of the skin and wrist tattoos.

  More information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• Satellite A300-1PH - how to improve the battery life

  I want to get an extended battery...
  How to improve the battery life?
  I have the Satellite A300-1PH.

  Hello

  You want to extend the battery work in order to use the laptop longer with the battery power?

  Well, in order to extend the battery work, you should check the Vista power settings.
  Here, you can assign some settings like brightness etc. who would save the energy of the battery of the screen.

  For more details, see this document how:
  + How to manage Windows Vista power management features? +
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  If you want to know wow to get the most out of the battery, consult this FAQ from Toshiba:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=20

  See you soon

• How to improve the rendering time on MacBook Air

  Hi all

  Processor: Intel Core i7-4650U @ 1.70 GHz, 2.30 GHz
  Installed memory (RAM live): 8.00 GB
  System type: 64-bit, x 64 processor operating system
  Operating system: 8.1 Enterprise, 64-bit Windows (boot to the Windows partition with bootcamp, work is not as a virtual machine)

  Any ideas how to improve the rendering performance of a YouTube video that I created. I realize that the rendering is not ideal on a MacBook Air, however, there are free of RAM and CPU capacity according to the directives of the screenshot:

  

  For example, I put that he should leave 1.5 GB of RAM for other programs, but there are still 3 GB free.

  (FYI at 01:24 popped it up to 100% of the CPU)

  Any help much appreciated.

  Kind regards

  Ben

  This isn't a very powerful machine.  It is probably not much to do.

• How to improve the performance of the import

  I'm converting a database of its current WE8ISO88591 character set AL32UTF8
  I use NLS_LENGTH_SEMANTICS to TANK so I don't have to increase the length of the column.
  
  I followed the instructions in the Oracle:
  144808.1
  313175.1
  
  Except import that takes too long.
  
  I took a full database export WE8ISO8859p1 and now its importation in AL32UTF8.
  
  It is always difficult to prove slow source; but I think it has to do something with NLS_LENGTH_SEMANTICS. On the same
  Server; If the new database was in WE8ISO8859P1, a 5 million row table import took 2 hours; but in Al32UTF8 with NLS_LENGTH_SEMANTICS it takes 1 day!
  
  No idea how to improve the performance of the import.

  DOUBLE WIRE!

  Please, don't post duplicate discussions.

  Mark this thread ANSWER and continue to use your original thread where you are already helped.

  You have NOT given the info that has been ask in your other thread.
  Re: NLS_LENGTH_SEMANTICS = CHAR import is too slow

• How to improve the resolution of the image with the help of filters

  How to improve the resolution of the image with the help of filters?

  resolution of the image, please check the links below. They should give you a clear idea about the resizing and resampling of images.

  http://helpx.Adobe.com/Photoshop/KB/Advanced-cropping-resizing-resampling-Photoshop.html#m ain_Resizing_and_resampling_images

  Understanding vs Resample resize | Learn Photoshop CS6 | Adobe TV

  See you soon!

  ~ David

• How to set the sampling interval using DAQ hardware?

  Now I have a sensor capability and hardware DAQ 24 bit (http://www.mccdaq.com/usb-data-acquisition/USB-2404-10.aspx).

  The DAQ hardware has the 50kS/s maximum sampling rate. My question is how to define the range of data collection. For example, if I set the sampling rate of 2000, continuous sample mode, I use read.vi DAQmx in a while loop and set the "number of samples per channel" to 100. I want to plot these data over time using a XY Chart and also save this data. So I add a 'Medium' function to get the average of 100 samples per each loop (medium, there are 20 release of data per second). But when I put a 'number of samples per channel' much more small (for more data per second), there are a few problems. It seems that the program cannot read the data as much and get the average at a higher frequency. I don't know where is the problem. Overall, the collection of data more frequently? Maybe I didn't articulate my question. I'll upload a simple program later if necessary. Thank you.

  
  

• Satellite P300 - 19 p - how to improve the graphics for Microsoft FSX?

  Please could someone tell me if and how I can improve the graphics of my laptop when I run Microsoft FSX?
  Of course, I could buy a good laptop with a high-performance graphics card, but is it something I can do to improve the graphics?

  Thank you very much.

  Hi Ben

  First of all, I must say that Flight Simulator X needs a lot of graphics performance and this game is really high system requirements. You need a powerful CPU, graphics card and enough RAM.

  Regarding your question an update of the map for example graph it s is not possible. It s fixed/soldered on the motherboard and there is no Exchange possible on desktop.
  So if you want a laptop that is faster for games, you can buy a new one, like the Qosmio X 500.

  You can only improve performance if you reduce the resolution of the screen or the details of the game.
  Make sure also that if the last page Toshiba display driver is installed.

• How to specify the sampling frequency? Must use "measurement & Automation Explorer '?

  I use to measure the input current analog OR cDAQ-9171 (chassis only location USB) and NOR-9207. I have 2010 NOR-installed DAQmx and LabVIEW.

  How can I specify the sampling frequency?

  If I use M & A Explorer to create the task, I can specify the flow rate (Hz) on the Configuration tab-> sync settings.

  For the acquisition of data NOR, it is mandatory to use M & A exploring?

  If I don't want to use M & A Explorer, how can I specify the rate (Hz)?

  Hello

  You can specify the sampling frequency with "DAQmx Timing.vi" located in the function palette DAQmx (read context-sensitive help on how to use wisely).

  You do not have to use M & A exploring (MAX) to create a task.

  A simple and quick way is to use DAQ Assistant (same configuration as in MAX) to configure your measurement.

  Another is to use blocks of DAQmx function to manually build your application code.

  In my experience Assistant DAQ is ideal for simple tasks (one measure), with regard to the more complex measures (synchronized the analog and digital inputs).

  I tend to use function blocks because they give you more freedom about code execution.

  Note: You can also build DAQmx code from a wizard configured DAQ task.

  Best regards

  Matej

• How to read the heart rate data recorded by the Apple Watch?

  My wife wears a Apple Watch and suffer from power cuts irregulars. After the last of them, I checked the data through the health app and saw that at the time of the blackout, there seems to be no saved data. A range of heart rate was recorded both before and after the blackout. Can someone explain how the data record? Thank you

  MIchael Gilmore

  This explains the various triggers causing the heart rate measure:

  Measure your heart rate with your Apple Watch - Apple Support

  Here is some additional information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• How to control the sampling time during data acquisition

  I managed to manually collect 16 channels of analog signals (writing custom file VI) using a command Boolean start/stop.  I would like to allow the user to set a term of the sample on the front panel (for example, 20 seconds) and initiate sampling by clicking a start button.  The user can also put an end to the reception of the data before the end of the set time by clicking a stop button.  I looked at several examples of countdown timer, but could not figure out how to integrate it with my VI.  All suggestions and examples will be very appreciated.

  You are far too complicated. On the one hand, there is the function elapsed time on your palette. Secondly, as already mentioned, there is a relationship of basic arithmatic between samples per second and the number of samples to be read. Use you will get samples more than this as requested anyway. Finally, your code shows two analog read tasks. You can do that, unless there are two separate devices.

• How to improve the performance of your computer and free up space.

  Original title: the unwanted temporary files of windows is at the origin of the problems of proformanace

  According to a check of problem: the unwanted files temporary windows could take to improve the performance of your computer and free up space.

  Can anyone help with this simple problem.

  Angelo

  Hi Angelo,.

  1. which edition of Windows are you running?
  Example: Windows 7 Professional 32 bit.
  Please follow the below link to clean unwanted temporary files.
  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
   
  Microsoft at home.
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=MDw_uUbCmMl
  Make slate: how to remove the unwanted files and programs
  http://www.Microsoft.com/athome/Setup/CleanSweep.aspx#fBid=MDw_uUbCmMl
   
  See also,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/performance-improve-slow-system-slow-startup/d0fd7b04-CD3c-4CE0-A9D6-60b6221171f0?msgId=cc2624b0-1972-4EC6-B1A4-f46140d44401
  I hope this helps.

• How to get the second clue high table max and min

  Hello

  I need help to find the second clue to the data table, how can I do?

  Secure with the extract of vi.

  Thank you and best regards,

  Simon

  You forgot to make the comparison to see where the 2nd most high index has declined compared to the highest.

  You only add 1 if the 2nd above comes after the highest.  You added 1 regardless of the position.

  

• How to call the samples shipped with JDE

  Hello

  I'm new to the BlackBerry development. I downloaded and installed JDE 4.7 which contained similators 9530 and 9500. JDE and Load Simulator fine on my windows XP machine. I use JDK 1.5. I had a few teething problems if anyone can help it will be great.

  It's strange that this simulator does not load if the java environment variables (JAVA_HOME, CLASSPATH and path to the location of the binary java) are defined in the windows environment. It loads well if the environment does not contain these variables. I worked around this by setting the variables in the environment and using a jdkenv.bat file if necessary.

  When I run ide.bat (for JDE) he lookes for javaw.exe in the path which make sure by running jdkEnv.bat before ide.bat. So my JDE also charge very well. I did a generation of samples shipped with JDE he built successfully. So far so good.

  Problem:

  When I try to run the samples, it loads the Simulator fine. I also see the name of the sample applications, if I followed the following phone Simulator {options} USER interface-Advanced Options-Applications online online I can see the names of all listed here demo. But I don't see any UI on the Phone Simulator that I can use to invoke these demonstrations of?

  I tried an explicit charge of the demo by file-> load Java program, it displays an hourglass and returns me to the phone home screen. It also updates the date and time of the application above mentioned location to the new location. But I'm still not a UI element user where I can call it in the demo.

  How to call HelloWorld or PhoneApiLog demo of the Simulator.

  I'm new to the development of BB and I'm sorry if I'm missing something simple. But indications will be useful.

  Concerning

  asachdeva.

  Discovered samples at-online downloads.

  Thanks for taking a peek.