How to include an additional channel in the standard waveform driver series AFG 3102

For Dennis.

I tried to copy the string. I placed the 2 chnnnels and tried to connect with various operators or similar AND SUM, FUSION, etc... but wasn't able to get both outputs simultaneously.

If by duplication, u mean something else, then please suggest me the same thing.

Thanku for your answer.

Kind regards

Charlene.

Following here.

None of these functions are useful. You just need to duplicate screws as I mentioned and that are already in your code.

All of this assumes that the instrument will allow both outputs being on at the same time. You can quickly verify this by trying to activate them manually.

Tags: NI Hardware

Similar Questions

  • How to include a license header in the fxml file?

    How to include a license header in the fxml file?

    I tried the xml block comments <! - mylicense here - >

    but it has not been accepted by the manufacturer of the screen.

    Also, I asked, even if it had been accepted, would have saved the return - or deleted header screen generator?

    All XML documents must begin with an XML declaration.

    If you have your file fxml starting with the following lines:

    .. It will be loaded into the generator from the scene and saved as is.

  • How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

    How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

    Hello

    Apple has not yet announced the capacity of storage or the music of Apple Watch series 2 storage limit.

  • How can I get my reference of the AdobePS free CS2 series?

    How can I get my reference of the AdobePS free CS2 series?

    It is not free.  downloads are intended for authorized users of cs2.

  • where to save the files under options the file name is duplicated how to remove an additional folder with the same name

    Under Options in Firefox, I clicked on save the files under downloads, but the file name twice and an additional file with the same name is created in the folder, i.e.:

    G:\Akbar's Songs\HAMARA DOWNLOADS\HAMARA FORUMS DOWNLOADS FORUMS

    As you can see the file repeats, how can I fix it?

    Also the music files, I download from a site of downloads as a WinRar file and I need to open it. Y at - it an option where the file opens automatically in the folder I chose?

    Thanks a lot for your help.

    Hi Akush, when you install 7 - zip, make itself the default application to open .zip and .rar files. So if you double click on the .rar file, it should open in 7 - zip. If you prefer to decompress immediately, right click the file and look for new 7 - zip items in the menu. I can't think of a way to do this automatically, however.

  • How can I turn a channel in the SMU-6556 hsdio for material comparison mode?

    Hello

    I am developing a system with Labview2013, TestStand2013, and SMU-6556

    The system diagram is:

    SMU-6556 > - 12 channels - 3---> Dut1

    Hardware compare mode:---3 channels---> Dut2

    | - 3 channels---> Dut3

    | - 3 channels---> Dut4

    In TestStand, I have the following configuration:

    1. in the "Setup" section I'm loading ~ 10 digital waveforms with 12 channels each in memory of SMU-6556.

    2. in the section 'Hand', that I'm running in hardware compare mode each digital waveforms. (DWF1, DWF2,..., DWF10)

    The system works well for test of 4 had.

    Without loading a new wave form how can I enable/disable underwent?

    For example, how can I configure to test only the dut1 and dut3?

    HELO engfpe,

    You can see the advanced, advanced attribute: hardware compare: bit Error Cumulative property and see if that will get your request.

    Cumulative error Bits will tell you what mistakes HWC product channels even if the FIFO is full. In this way, you can at least know where to pass the ASE. If it fails and you would like more information, then you should always charge the waveform in order to get a manageable number of HWC error, but hope that helps at least. This feature was added in NOR-HSDIO 2.0, so make sure you have the latest driver.

  • How to read 4 similar channels at the same time with the MCC

    Hello

    with the mcc libraries and a card PCi-6034 classic (by calculation of the measure), I want to read 4 analog channels at the same time. I have a "scope" with 4 channels.  How to read 4 channels at the same time with the mcc?

    MF

    Hello MF.

    Thank you for using OR support.  I guess you try to program in LabVIEW.  Where exactly did you get the MCC library of?

  • How to tie two additional monitors for the new laptop Alienware 15 for the purpose of the game.

    So Im wondering how I'd go on the attachment of two additional monitors for the new laptop Alienware 15 for the purpose of the game. I hope no lag between the monitors. Is chaining possible? If it is still possible that would have my monitors need connections?

    Yes.

    Yes.

    N °

    N °

    If that's enough?

  • How to add a 2nd HD as the primary hard drive with an OS, STILL make my current HD, as a 2nd hard drive.

    Hello

    I have a Dell Inspiron 530 (Core 2 Quad with 4 GB of Ram - Win Vista Home) with an internal 500 GB SATA HD and want to replace it with a WD 1 TB SATA internal hard drive and add an operating system (Win-7 - 32-bit).  I hope that this isn't really a problem, and yet, I would like to use my current 500 SATA GB internal HD, I replaced, as a (the) 2 internal SATA Hard Drive.  Years, 2 two different internal hard drives have been set as master and slave.  Any ideas on how to make the transition to the larger 1 to SATA HD, install an OS on it and then install my previous 500 GB SATA HD as a 2nd HD internal?  Thank you very much for any help!

    You can leave the 500 GB drive, as it is if you want.  The system configuration has a menu item, the boot order, which determines which device gets tried first when you start the system.  Most Dells made before 2012 make this easy for you, because if you do not have a RAID actually running on the machine, the disk hard boot option is limited to SATA 0.  That is why your boot hard drive must be attached to this port.  The operating system on your 500 GB drive not even considering, although it is possible to set up the boot on SATA disk 0 files so that you can start the operating system on the second disc.  Systems of multiple starts work like that, and if you want this option, the installer of Windows 7 would even set up for you.

    I have Windows XP on the SATA 0 drive in my XPS 410.  I bought a second drive, started the Windows 7 dvd and run the Setup program to install Windows 7 on the second disc.  When my computer starts up, a message appears giving me the option to boot or the other OS.  Make no mistake, however, if the SATA drive 0 fails, you cannot start the second player by itself.  Initial startup files are always on SATA 0.

  • Windows 7 does not detect the additional disks in the selection of drive during the instalation

    OK, I have a Dell Inspiron 17r 7720, it has 2 drives 750 GB and a 32 GB ssd

    the installation of 7 single 750 GB is available, the other 2 drives are no where to be seen

    all are detected in the bios

    any information would be greatly appreciated

    Thank you

    Hello

    Please keep us updated on the status of the issue.

    However, tried to run the Hardware Diagnostic Utility for the hard drive such as suggested by Ashish Sondhi responded on 22 November 2014.

    If so, please answer with the results, in order to help you solve the problem.

    Thank you

  • How to implement a custom button without the standard template.fmb lov?

    Hello

    I'm developing an application using oracle's 10g. I can't use the standard template.fmb because my application is not running in ebs. There comes the problem: I want to implement the function of button lov as the model, such as:
    1. when the text element gets the focus, display button lov.
    2. when the lost text element the focus, the lov button disappear.
    3. when the reels of the scroll bar, the position of the button lov adjust accordingly.
    4. There is only one lov in a form button and the button lov appeared dynamic.

    I found that it is very complex for that.
    can anyone help?

    Try changing the following parameter to true

    app.ui.lovButtons=false
    

    in $ORACLE_HOME\forms\java\oracle\forms\registry\registry.dat

  • How to connect an additional monitor for the gateway all-in-one?

    Hello you all, I have a question I hope you a lot more smarter computer people can help me with. I have a friend who has a gateway all in one model #-ZX4931. It has a VGA port on the back. It has been also updated for Windows 10. I'm house sitting and dog looking for her in a few weeks

    I want to plug the additional monitor which by the way, it's a Dell (sorry) to work on a project I'am doing right now. I try to use the screen that she has on the All In One and I didn't like how my project came out looking

    I see on the back of its All In One, it has a VGA port. I Google several times and different words from Google, which told me that you cannot plug an additional external monitor for all in one PC, so I'm confused as to why there is a VGA port, if you couldn't plug the external monitor

    in any case, can someone please help me and give me details on how to connect an external monitor, in addition to its gateway all in one model #-ZX4931

    Looking at your specific model, I think you can try to connect an external monitor via the VGA port.

    Once you have connected the secondary monitor using the VGA port, press control + p and main Windows logo if you are able to extend or clone your desktop.

  • How to expose several audio channels of the MXF file in body CC 2015?

    I import MXF (from C300) files that should have two audio channels separated from two different microphones. (When these files are opened in Final Cut you can see two audio channels to separate). Agency CC 2015 it shows me only one audio channel. When I go to "Edit"->"audio" window I see no way in there to expose the second audio channel. How do I do that?

    You'll need a parameter like this:

    You need to do before you put anything on the timeline.

  • How to include external style sheets for the EPUB export

    Hi all

    I try to include a css for the epub export file. Here's what I'm trying.

    var doc = app.activeDocument;
    with(doc.epubExportPreferences)
    {
            includeDocumentMetadata = true;
            imageExportResolution = ImageResolution.PPI_150;
            imageConversion = ImageConversion.JPEG;
            embedFont = false;
            includeCSSDefinition = false;
            preserveLocalOverride = false;
            externalStyleSheets = "D:/Chinna/Epub/QJ-stylesheet.css";
        }
    doc.exportFile(ExportFormat.EPUB, File(doc.fullName.toString().replace(".indd",".epub")), false);
    

    It returns an error. (Expected in string table but received "D:/Chinna/Epub/QJ-stylesheet.css").

    Kind regards

    Cognet

    Try:

    externalStyleSheets = ["D:/Chinna/Epub/QJ-stylesheet.css"];

  • How to include descriptions of line in the newspapers?

    Hello

    trying to export logs to HFM with Excel models. HFM/FDM version used is 11.1.1.3.

    I wonder if it is possible to include descriptions of line in HFM-journals when they are displayed through FDM?

    When the journal template is defined, account dimension is named 'A' and ICP with 'I', etc. According to Manual of FDM, description is called "D", but this tag transfers the content of the column to the General description in the journal HFM and line descriptions are left empty. What would be the appropriate label in the sheet model referring to the description of line?


    BR,
    Juha

    Sorry I misread your previous post. The description of line is currently an enhancement request. You can change the action of the adapter that generates the log but that would make your unsupported adapter. It's fine as long that you break it up but any customizations make you will not supoprted and would be lost when you upgrade the adapter.

Maybe you are looking for

  • IPhone 6s - microphone does not work on all applications except camera and calls

    Hey, I don't know exactly know what happened with my phone. Suddenly, my microphone work on LINE, Whatsapp and almost all other applications that use mic. Except, camera and when someone call me on my number. But it does not work on whatsapp and LINE

  • Restart my windows

    Can I use HDDRecoverty if I rebooted my windows?It is downloadable somewhere?

  • Communication via a USB hub

    I have a pair of FuTek USB210 devices which work perfectly when it is connected directly to the computer, but have significant issues, if I try to plug them into the 10 ports Plugable USB hub.  I have a large number of instruments that I need to conn

  • Envelopes printing HP 8600

    I need to print addresses on envelopes of size different for example no. 10 envelopes; Greeting card, envelopes etc. How to configure my HP 8600 printer to adjust the size of the envelopes?

  • Impossible to install intellitype pro 8.0

    Hi all I am currently not able to install the intellitype pro 8.0 software to use for a natural ergonomic keyboard 4000 MS v. 1.0. When I try to run the installation file, ITPx86_1033_8.0.225.0, which is the one for Vista 32 bit I downloaded today, I