How to index a table on multiple sites?

Similar Questions

• How can I do the following to happen: Browse multiple sites at once, simply and easily. Each new site appears as a new tab.

  A tab open, when I click on a bookmark, the browser IS NOT open it in a new tab. It open in the same tab, replacing the old site.

     In FEATURES it says:
  

  «Browse multiple sites at once, simply and easily.» Each new site appears as a new tab.

     I wish it would.
  

  Install one or both of these modules.

  • https://addons.Mozilla.org/en-us/Firefox/addon/open-link-in-new-tab/
  • https://addons.Mozilla.org/en-us/Firefox/addon/open-bookmarks-in-new-tab/

  In addition, see How to set the home page which explains how to open several sites such as your homepage.

• How to index color property table 1 d cluster of 2 elements

  I am trying to find a way to index a table of color properties so that I can selectively turn on each of the 15 LEDS on my front. I can get the whole group in the light of the specific colors and disable one of the lighting by pressing the LED, but I can't understand how the table to control an individual LED to the index. My attempts to get a function array index with an error that the source is a cluster of 2 elements and the sink is a table 1 d of cluster of 2 elements.

  Try this. I put a delay in there, so you can change the value of the enum inbetween loop interactions. This will result in different positions get different colors. For the 15 simply to feed a table of colors that indicate the status of each post. Put this outside the loop and the use of the size of the array get to control how many times the loop is running. Add each post in the right place in the structure of the case.

  I hope this helps!

• How can I make a separate Table of Multiplication?

  Table of Multiplication to make this Code: -.
  
  
  BEGIN
  FOR I IN 1... 12 LOOP
  DBMS_OUTPUT. PUT_LINE ('-['])
  || I have
  ||'] ----------------------');
  
  FOR J FROM 1... 12 LOOP
  DBMS_OUTPUT. PUT_LINE (I
  ||' *'
  || J
  ||' ='
  || I * J);
  END LOOP;
  END LOOP;
  END;
  /
  
  ---------------------[1]----------------------
  1 * 1 = 1
  1 * 2 = 2
  1 * 3 = 3
  1 * 4 = 4
  1 * 5 = 5
  1 * 6 = 6
  1 * 7 = 7
  1 * 8 = 8
  1 * 9 = 9
  1 * 10 = 10
  1 * 11 = 11
  1 * 12 = 12
  ---------------------[2]----------------------
  2 * 1 = 2
  2 * 2 = 4
  2 * 3 = 6
  2 * 4 = 8
  2 * 5 = 10
  2 * 6 = 12
  .................. ......................
  .................. .......................
  11 * 7 = 77
  11 * 8 = 88
  11 * 9 = 99
  11 * 10 = 110
  11 * 11 = 121
  11 * 12 = 132
  ---------------------[ 12 ]----------------------
  12 * 1 = 12
  12 * 2 = 24
  12 * 3 = 36
  12 * 4 = 48
  12 * 5 = 60
  12 * 6 = 72
  12 * 7 = 84
  12 * 8 = 96
  12 * 9 = 108
  12 * 10 = 120
  12 * 11 = 132
  12 * 12 = 144
  
  PL/SQL procedure successfully completed.
  =====================
  
  It's good, but I want to change my code to perform a distinct results.
  meaning precise, if this result produce (1 * 12 = 12) that I do not have it repeat
  Once again as (12 * 1 = 12) or (2 * 6 = 12)... ect.
  
  are there any suggest?

  Simply store your results in a table of hash and before the arrival of output, if the results have already been produced.

  declare
    type res_t is table of number index by binary_integer;
    results res_t;
  begin
    for i in 1 .. 12 loop
      dbms_output.put_line('---------------------[' || i ||
                           ']----------------------');
      for j in 1 .. 12 loop
        if not results.exists(i * j)  then
          dbms_output.put_line(i || '*' || j || '=' || i * j);
          results(i * j) := i * j;
        end if;
      end loop;
    end loop;
  end;
  

  Best regards

  Maxim

• How to build a table of TDMS file open

  Hello

  Examples NI TDMS - Express write data .vi (time domain), I can build a PDM file with 2 channels (sine and square waveforms) data, which are stored as test.tdms.

  Using Express read .vi data (time domain), 2 channels of waveform data are read. How to build a table later? How to separate the 2 channels of data in the tables 1-2 and manipulate the data using table functions?

  For example,.

  I want to collect 100 from index100 between channel 0 and their average. I want to take 50 samples from the channel 50 1 index and double each element.

  Thank you for your help.

  Bing@NCL

  Hey Bing.

  You can perform operations on different channels in the 2D table using the table to index. This will allow you to choose the channel to operate on, then you can perform the operation inside a loop on each element. In the included code snippet, I used a shift register to find the total cumulative values in channel 0 and then divided by the number of samples.

  I recommend you read some tutorials LabVIEW and bases of knowledge on topics that are related to yours. These could help a lot.

  I hope that my suggestions help,

  Chris

• How to build a table using incoming data stream?

  I'm programming in VBAI but use LV as my Interface of Inspection. The VBAI program will go into a finite loop (x 1000) and the digital indicator with dbl vaule of food in front of the LV Panel if the value double is in order.

  In LV, how to build a table (index 0-999) with this stream?

  
  

• How to create a table in if/else or structure without 0-case?

  Hello

  I tried to do for a while now.

  I only managed to think about this in three ways:

  1. (what I'm doing right now create the table through a loop for, fills the table in automatic indexing.) Filled it with many of if true and with a '0' if the value false. The idea was to remove the 0 later in the code. However, this seems very inefficient.

  2 make use of a registry change, which automatically adds the correct number of a table. The problem is that the table will keep growing and growing and at the very least would enormously slow down my program. At worst, it would break.

  So my question is: how to create a table that if a comparison is true, it puts the item in and if not, it does nothing?

  I have attached a PNG of my code snippet.

  Kind regards

  David.

  If you want to only affect exactly as much memory as you need for the table, you can count the number of true elements in the table of Boolean everything first and then assign one of exactly this size. In this way, you are more memory and time-efficient whether overuse (such as allocation of an array of I32 as big as the whole table boolean) or underallocating (from zero element and let it grow automatically whenever you add on).

  Count the true values, allocate an array only the great and then replace each value in this new table with indexes / "I ' value where the real exists." An excerpt from VI:

  

• How to build the table with all the combinations of a source table?

  Hello

  I have a 2D array that contains the list of the power user-defined settings. The number of PSs (table rows) is not fixed. For example - 3 PSs:

  Stage of Min Max name

  PS1 3.0 3.6 0.3

  PS2 0.9 1.2 0.1

  PS3 1.7 1.9 0.1

  I need to build, from this list, a table of all the combinations as below:

  PS1 PS2 PS3

  3.0 0.9 1.7

  3.0 0.9 1.8

  3.0 0.9 1.9

  3.0 1.0 1.7

  3.0 1.0 1.8

  3.0 1.0 1.9

  3.0 1.1 1.7

  3.0 1.1 1.8

  3.0 1.1 1.9

  3.0 1.2-1.7

  3.0 1.2-1.8

  3.0 1.2-1.9

  3.3 0.9 1.7

  3.3 0.9 1.8

  3.3 0.9 1.9

  3.3 1.0 1.7

  3.3 1.0 1.8

  3.3 1.0 1.9

  3.3 1.1 1.7

  3.3 1.1 1.8

  3.3 1.1 1.9

  3.3 1.2 1.7

  3.3 1.2 1.8

  3.3 1.2 1.9

  3.6 0.9 1.7

  3.6 0.9 1.8

  3.6 0.9 1.9

  3.6 1.0 1.7

  3.6 1.0 1.8

  3.6 1.0 1.9

  3.6 1.1 1.7

  3.6 1.8 1.1

  3.6 1.1 1.9

  3.6 1.2 1.7

  3.6 1.2 1.8

  3.6 1.2 1.9

  How to build this table programmatically?

  (Note also that the number of rows in the source table is not fixed).

  Thanks in advance!

  Hi Berezka,

  using a magic of automatic indexing:

  

• How to build a Web of Oracle site style

  Dear all,
  (Not sure that this question should be this subsite or not).
  
  My question is how to build a Web of Oracle site style, what technology should be used.
  Example Site: [http://www.orapub.net/ebs/index.htm | http://www.orapub.net/ebs/index.htm]
  The style of this web site is like Oracle Enterprise Manager.
  
  Thank you very much
  Pan

  You can use Oracle Webcenter or just Oracle ADF to build a kind of Oracle Enterprise Manager of the site.
  See details here-
  http://St-curriculum.Oracle.com/OBE/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm
  http://www.YouTube.com/watch?v=iE2zTNhlvy8

• How to design the table from the answer to the question table.

  Hi all
  
  I am creating an application for student review online.
  
  There are two types of questions, the only choice of response and multi choice answers.
  
  My question is less than

  create table question_master
  (
  exam_id number references exam_master(exam_id),
  marks_of_each_question number,
  type_of_question char(1),-- single choice answer/multiple choices answer
  q1 varchar2(2000),
  q2 varchar2(2000),
  q3 varchar2(2000),
  q4 varchar2(2000))

  my table to answer (I'm not satisfied with who is below

  create table answers_of_questions
  (
  answer_id number primary key,
  question_ID number referenes question_master(question_id),
  answer varchar2(4000) not null,
  is_answer_correct char(1),--y/n,
  student_selection char(1),--y/n   student select it or not
  ....
  ...

  now, I'm perfectly how to create the RESPONSE table to contain the answers.
  the only choice is good, but several checkboxes choices, what to do?
  How to design the table from the answer?
  
  do I have to create 2 tables to contain the answers?
  Note: the QUESTIONS and ANSWERS, all will be entered by the teacher. students will make a choice and I will store this choice in another table
  may be called STUDENT_SELECTED_ANSWERS or something like that.
  If anyone has some reference to the script retail scheme review online, kindly share with me.
  
  Kind regards.
  
  Kind regards.

  If you need to have answers in another table:

  Student (student_id, name, etc...)
  Review (exam_id, exam_name, etc...)
  Question (question_id, exam_id, question_text)

  Response (question_id, a_text, b_text, c_text, d_text, a, b, c, d).<-- one-to-one="" with="" question="" table,="" a-d="" flags="" used="" to="" indicate="">
  OR
  Response (question_id, answer_id, answer_text, OK)<-- many-to-one="" with="" question="" table,="" correct="" flag="" used="" to="" indicate="" correctness="" for="" this="" single="">

  Student_Answer (student_id, question_id, a, b, c and d)
  OR
  Student_Answer (question_id, student_id, answer_id)<-- creation="" of="" a="" question_id+answer_id="" in="" this="" table="" implies="" the="" student="" checked/selected="" it="" as="" an="">

  To what extent you want to standardize, it is up to you.

• Unusable index Partitioned table

  Oracle Version: 11.2.0.2
  OS: Linux RHEL 5
  
  I'm having a problem with the index on a partitioned table interval. This is the scenario:
  
  There are 3 indices (A, B, C) on a table. A is created on two columns (1,2), B is on the column (2), C is the column (3). Table is partitioned on column 2 apart. A and B are partitioned indexes. When I drop a partition without a clause to update index, Index C will unusable. After seeing this, I gave up the C rating and create it as a local partitioned index, then all indexes are in condition of use after the drop partition statement. Is - this mandatory on a range partitioned table all indexes on the table must be locally partitioned inorder to have indexes in usable state after the drop statement of partition (without the update index clause)? Also there will be a negative impact for all indexes on the table like locally partitioned indexes?

  >
  Is - this mandatory on a range partitioned table all indexes on the table must be locally partitioned inorder to have indexes in usable state after the drop statement of partition (without the update index clause)?
  >
  Yes - it should be obvious by looking at a simple example.

  You have an OVERALL index and drop a partition but say Oracle are NOT updating the overall index.

  How this index may be usable for anything? It is not accurate. There was GARBAGE everywhere that gets in the way of Oracle find the entries of the "good". There are the index keys in the branch blocks that belong to the partition that has been deleted. Oracle cannot use these keys to determine how the blocks of branch, he needs to find.
  >
  Also there will be a negative impact for all indexes on the table like locally partitioned indexes?
  >
  Who knows? There are maybe or maybe not.

  As with many things Oracle "it depends."

  It depends on what types of queries that you ran.

  It depends on the filter predicates used for query.

  It depends on if the maintenance simple score (add/drop/split) are important to you.

  For the maintenance of the partition only all index LOCAL is the best.

  For full table scan, an index is not intended to be used.

  For a query that needs all THE records for a COMPANY_ID given in a table partitioned by DATE an OVERALL index could be better. Oracle also use 100 index LOCAL (if there are 100 partitions) to get the same data.

  It depends on.

• You can host multiple sites on a single account webBasic?

  You can host multiple sites on a single account webBasic?

  Hello

  Basically not how it has been intended for.

  You have the option to have a partner account that you can create different sites in your portal where each site will be under its own plan.

  Or you have an existing account that is designed for a single site.  So I wouldn't say that, but ideally, you could add several domains under a plan account to a site, but you will then need to share the same account (a store of sense, a set of system messages, layout, etc.).

  These are the options at this point.

  I hope this helps!

  -Sidney

• How to create a table variable

  Hi people,
  
  I develop a fly activity, for each branch created, I need to pass different values (that I get from DB).
  
  For this, my plan would be,
  -create a load of variables, array of all the values in the table (from DB)
  -pass the array to each branch in fly activity based on the index
  
  As I am newbie to BPEL, I don't know how to create a table variable.
  
  You people could guide me please.
  
  
  Concerning
  VIKI

  To add to the response of Anne:

  use XPATH to get your value

  entry/string_array / [1]
  / string_array/input [$counter]

• 5.6.1 pages: How to create a table with more than 999 lines?

  5.6.1 pages: How to create a table with more than 999 lines?

  The table on Pages v5.6.1 line selector is limited 3-digit, as it is in Pages ' 09 v4.3. Either use LibreOffice Writer, who does not have any constraint line on processing tables 3-digit, or any application spreadsheet for top 3-digit row needs.

• How will I know if a connection site is secure? In Safari or Explorer, there is an icon lock visual, but not in Firefox. Is there an add-on that meets this need?

  How will I know if a connection site is secure? In Safari or Explorer there is a locking visual icon in the web browser window, but not in Firefox. Is there an add-on that meets this need?

  The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server. So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL. The lock feature has been replaced by the identity button of the Site on the left end of the address bar (address).

  https://support.Mozilla.com/en-us/KB/site+identity+button

  http://www.Mozilla.com/en-us/Firefox/security/identity/

  This has actually existed since Firefox 3.0

  If you still want an icon of padlock also then there is this Extension.
  https://addons.Mozilla.org/en-us/Firefox/addon/padlock-icon/