How to install a driver for Visioneer 5800 Scanner

How to install a driver for Visioneer 5800 Scanner

[Moved from comments]


Go to to find the correct driver. Download and install it.

You have not provided your version of Windows, but it seems (in a nutshell) that the latest drivers for the 5800 were written for Windows XP/2000.


Tags: Windows

Similar Questions

  • How to install a driver for a 1200 dpi USB Scanner?

    Original title: the driver Installation

    How to install a driver for a 1200 dpi USB Scanner?

    When you plug the scanner via USB that you see the animation in the system tray at the right end of the taskbar?  Click to watch.

    If we install a basic driver and comes to Panel > display icon > devices and printers (right click on Start button go to the control panel), then you could get basic Windows Fax and Scan feature by right-clicking on the icon of the Scanner it.

    If this isn't the case, install the full software package for the Scanner to its Support Downloads Web page.  This should give you the scanner software to run the scan from a PC or a scanner.

    Let us know how it goes, or any other help you need.

  • How to: install the driver for scanner "visioneer onetouch 8920 usb" diskless

    Original title: is there a way to get a "driver" for my scanner "visioneer onetouch 8920 usb", other than the dish that comes with it? (I have no disc drive for my netbook)

    I recently got a netbook, the Acer aspireone running windows 7 starter edition, I have a scanner, visioneer onetouch 8920 usb. the netbook I have has no disk drive, I plug the scanner and windows cannot load the driver.  I need help to find how to install the driver, so I can use this scanner.

    Driver download page (but the latest drivers for XP - they will probably not work):

    Troubleshoot Compatibility

    This can help with some (but not all the) programs/drivers:

    (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

    (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

    (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in windows 7.

    More information on how to make older programs in this version of Windows:

  • How to install the driver for a Lexmark 730 printer?

    How can I install a driver for my Lexmark 730 printer

    Lexmark drivers:

    Download drivers

    Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver and then follow the instructions to install.

  • How to install a driver for my video card updated? Online.

    How to install an updated for my video card driver online?

    How to install an updated for my video card driver online?

    1. click on the Start button.

    2. in the start search box type: Device Manager and press the Enter key.

    3. expand to see what graphics cards that the graphics card is there.

    4. visit the website of the manufacturer of the graphics card.

    5. download and save the latest compatible driver (eg.on your computer desktop)

    6. once the download is complete, double-click the file to run it and follow the instructions on the screen.

  • How to install the driver for Canon MP540 on Panasonic CF - C1.

    Original title: Driver for Panasonic CF - C1

    How do I install the driver for canon mp540 on panasonic CF - C1


    What operating system is installed on the computer?

    You can download and install the drivers for Canon PIXMA MP540 from the following link.

  • How to install a driver for my graphic card updated, and where I would get

    How to install driver for my graphics card, and where would I get it?

    The site of the factory.

  • How to install the driver for a Raid card.

    I hope that this question is of you and yours.

    I have:

    ESXi 4.1 operational on a Dell 1950. He has a basic raid card that works. This is the functioning and VM are stored.

    I installed a 1212 4 Areca Raid port cards. I have attached two Intel SSD's in raid 1.

    My Bios sees both the original and the 1212 raid cards and disks.

    Areca at startup utility says that everything is swell.

    ESXi is unable to see the 1212. I went to the Areca website and downloaded the driver for ESXi 4.X.

    I followed the instructions for all upward using the CLI interface. He begins to apply the patch, but then I thought that a file is missing and things are abandoned.

    I went to the site of vmWare and downloaded their solution. Once again using the interface CLI things start to download but then I thought that there was no update occurred or the boot. Nothing to do.

    Here is the link to the drivers of the Areca. The installation instructions are great, but for the file.


    Any ideas? Thanks for help.

    John Ullom

    I had a similar problem with the Areca 1222 (version 8 ports of yours).

    I was able to fix by changing the zip file of Areca. In the folder while offline connection-bundle, you will find some arcmsr ARC - - offline_bundle - Inside that zip you will find Inside of this zip, look for vmware.xml. Modify the file as follows:

    Find the following text:

    You should now be able to install the CLI.

  • How to install the driver for the webcam on windows 8

    Hi everyone, I'm using sony vaio ITS 41FX

    When I start using windows 8 on my laptop, my webcam still worked normally

    but after 2 months, it does more and in the Device Manager, "unknown hardware" appears

    You can help me solve this problem!

    Thank you very much!

    I experienced a similar problem and figured out how to reinstall the Microsoft drivers required by internal webcam on my laptop.  Date of arrival:

  • How to install the driver for the webcam on windows 8 in order to improve the quality of the image

    We can use any software compatiable or the driver in VAIO SVE15129CN to improve the quality of the built-in webcam image. Please guide.

    Hello Nisar,

    Follow all the steps mentioned in the link below to reinstall the driver for the Webcam.

    Then perform system refresh.

    Then, perform a recovery system to factory settings.

    Note: It is necessary to backup all data before performing the system recovery as it erases everything from the computer.

    If the problem persists, contact the Sony team in your country to launch the service.

    If my post answered your question, please mark it as an "accepted Solution".

  • Satellite L510 - how to install the driver for wireless network card?


    I recently bought Toshiba Satellite L510 laptop and problem in the installation of the wireless driver. I downloaded the driver from Toshiba sites.
    And installation get competed with success but it always ask for divers 'Network controller' and 'Askey for Toshiba.
    I'm trying different drivers of these last two days, but without success.

    Can someone Guild me please how to configure computer L510 laptop wireless. Also where can I get the drivers mentioned above.

    Thanks in advance.

    Hi mate,

    I m asking you to install the WLAN driver on your laptop computer purchased recently. Normally all the stuff is already preinstalled the operating system with all the drivers and tools. He s ready to use.

    However, what you mean exactly with her always ask for divers to Askey Toshiba network controller?

    Your wireless network card is listed in the Manager device correctly or yellow exclamation? What WLAN card you have?

  • How to install the driver for Intel HD on Satellite C660-22V


    I couldn't answered below so here's my question.

    As * I don't know if you work for toshiba but what else am I supposed to do if the driver is installed on a new laptop does not allow me to use my software?

    The software is ArcGIS and would be widely used.

    Looks like it's been 2 years since the driver was updated by Toshiba so what is that?
    I expect the laptop to work out of the box, given that the specifications meet the system requirements for the software.

    Will there be an update in the future?


    This seems to be a user to user forum so don't expect to get answers from Toshiba here

    > Looks like it's been 2 years since the driver was updated by Toshiba then what is that?
    > I would expect the laptop to work out of the box, given that the specifications meet the system requirements for the software.

    Where a problem? Satellite C660-22V supports Intel graphics cards.
    Visit the Intel page to get the latest graphics driver.

    If you would not be able to install this using the install.exe, go to the Device Manager and install/update the driver via Device Manager graphics card
    Use the option of advanced installation so that it points toward the driver's record that contains the latest driver files that s

  • How to install a driver for f4500? Error dot4_plugin.exe has stopped working

    I had this printer HP Desk Jet F4500 connected to my computer laptop operating system windows 7 64 bit for months now, the printer has no drivers and I can't get them.  I went on HP website and downloaded the base and the recommended full downloads and still the same error Stops the installation.  dot4_plugin.exe has stopped working the extent of attributes are inconsisitent.

    Help I am more than two hours in this and don't know where yet.

    I did some additional research on this issue, more specifically the error 'extended attributes are inconsisitent' and found that this seems to be a Windows problem. Here are a few things you can try to solve the problem:

    Method 1: Perform a scan of the file system (CFS) checker on your computer

    Steps to use the SFC/SCANNOW command:

    1. click on start-> click on all programs-> click Accessories-> right click on command prompt-> Select run administrator-> click on continue
    2. at the command prompt-> Type "sfc/scannow"-> press enter
    3. follow on-screen messages to start the analysis of the system (this process can take a long time)
    The following will happen:
    Start of the phase of verification of the scanning system of-> % of full audit.
    4. once the analysis is complete, you will see a message with one of the following:
    a. not found any breach of integrity
    b. find corruption but repaired
    c. corruption that he couldn't fix

    Method 2: System Restore will take your PC to a previous state when the PC worked.

    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start-> Type "System Restore" in the box start search-> click System Restore listed programs.
    Type your password-> click continue (if you have one)
    2. in the dialog box the system restore-> click on a different restore point-> click Next.
    3. in the list of restore points-> click a restore point created before you started having problems-> click Next-> click Finish.

  • How to install a driver for USB Kingston Data Traveler 100 G3 routine

    I failed to get the key USB Kingston Data Traveler 100 G3 work on one of my computers (Windows 7).

    But I have in fact on another computer and I found that this driver is signed by Microsoft Windows. The version is 6.12.7601.17577. The date is 2006-06-21.

    So I want just a site where I could download the driver routine.

    I finally received a response from a company of the retail, Claes Ohlson. There is a hardware thing lacking on computers more alumni who explains why the Kingston 3.0 will not work. It will make no difference, if I reinstall Windows. Kingston or other Zalman services could give me this answer. Neither Microsoft Community could give this answer. So I end the question.

  • How to find the driver for HUAWEI cell phone Pocket

    How to install a driver for HUAWEI cell phone.

    Check your model number of countries and device

Maybe you are looking for