How to install a scanner HP psc 2410 Photosmart all-in-one without a disc, please?

Similar Questions

• Failed to get printer hp psc 2410 photosmart all-in-one to print in color

  I have a hp PSC 2410 photosmart all-in-one printer. I use it on a system windows xp, 32 bit.

  I went to make a copy in color on the printer and it gave an error on the black cartridge by saying that she does not recognize.  Had not changed or replaced the cartridges they were half full.  I tried to go out and reinsert the cartridge, but it did not work.

  I replaced it with a new one.  Error disappeared, but it now only prints in black and prints any color at all.

  Replaced the (full) cartridges with new ones, aligned and clean the printer started it twice, without change.

  Close the pritnter and computer, did it again, same results.

  Uninstalled and installed printer and software, same result.

  What could have happened?  Behaves as if it doesn't have a color cartridge.

  Here is a document for your printer who carry on Matt, missing or faded colours. This document starts and you then click on other links to documents based on your results from the troubleshooting performed. Stay with him and he will lead you to how to clean contacts and how to read the diagnostic report, once it prints.  I think that some steps are buried, so here a link to assess the self-test. Finally, here's a direct link to fix bad test models in the self-test report. I hope this helps. http://support.HP.com/us-en/document/c00048685

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• HP PSC 2410 Photosmart all-in-one compatibility issue with Windows 7

  My HP PSC 2410 Photosmart all-in-one does not work in Windows 7.  Said that there is a compatibility issue.  Can someone please?  Thank you!

  HI JourneysLady,

  I understand and would like to mention that as I said in pilots are a basis of drivers and they have the ability to print and you can scan through Microsoft Paint or scanner and camera, but would not be able to scan using any software complete features and driver software is required for this but unfortunately the full feature software and drivers is not available for the device that you use.

  --------------------------------------------------------------------------------------------------------------------------

  Please click on "CONGRATULATIONS" If the problem is resolved and you want to say thank YOU.

  ----------------------------------------------------------------------------------------------------------------------------------------------------------

  Although I am an employee of HP, I speak for me.

  ---------------------------------------------------------------------------------------------------------------------------

• HP PSC 2410 Photosmart all-in-one printer SLOW printing

  All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

  Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

  I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

  Help!

  Hey Rainbow7000,

  I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

  I would have thought there would be some am indicator when the cartridge is low, but it was not.

  Thanks anyway.

  RenardB

• Unit Auto-duplex of PSC 2410 Photosmart all-in-one

  I bought a new computer that uses 7 (64 bit) of Windows operating system. I have attached a PSC 2410 Photosmart all-in-one printer. The auto-duplex feature is no longer available, manual duplex printing is available. When this printer was attached to the previous auto-duplex printer unit funtioned perfectly. Only change was to the old unattach & reattach again.

  This problem can be resolved or do I use the manual funtion?

  The duplexer must be activated as described in the "Vista/Wixndows 7 Duplex Printing Troubleshooting Guide".

• Cannot scan HP PSC 2410 Photosmart 'all-in-one '.

  The function "scan" on my hp psc 2410 printer/scanner/copier/fax MACHINE used to work on my other computer running Windows 98 was, but I wasn't able to scan in Windows Vista.  The printer function works fine.  Is there a 'driver' that I'm missing?  Help, please!  I need to scan documents signed for my husband's business.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=au&lang=en&product=303753&

  Read the above. Re Vista drivers.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with other questions of printer in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• HP psc 2410 photosmart all in one series, all of a sudden takes an hour to photocopy or print a page...

  HP psc 2000 series, model 2410 photo smart all-in-one series. Windows 7 operating system. Suddenly takes an hour for photocopying or printing. no error message. Transport print access door may have been opened during a previous print session. Power unit failure and restart and remove and reinsert the cartridges has no effect.

  This is caused by the failure of one of your cartridges. I don't remember if the PSC 2410 will support printing (do not copy) with a cartridge removed in reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• PSC 2410 photosmart all-in-one PROBLEM

  Hello, hoping someone can help me with this...

  I have a problem with my printer (psc 2410 all in one)

  During a simple formulation document printing, the printer ran out of paper and could not continue printing paper had been completed. I checked for paper jams - there is no. The print job has been cancelled and the printer and turned it over.

  From the market, it seems now stuck - the power button flashing continuously and the display only I get is the 'busy' hourglass icon... no other error messages or beeps. I can hear the printer through movements start, the flow of paper moving and then he seems hang somewhere and made a repetitive thud. This noise stops after about 1 minute and the display and flashing remain.

  I tried the hard reset several times, I even left it the day after. I noticed that the USB cable, jumped, but the printer also shows online on the computer... I tried to a maintenance operation, but he is not letting all through all print jobs. It's happened a few times when starting upwards, but apparently not however resolve no chance this week.

  Any help is greatly appreciated.

  Thank you

  Sam

  The operating system is Windows XP

  Hi samanthapson2,

  Have you thought about upgrading your printer for a newer model. Here is some information that will help you get into a new printer.

  HP trade-in program

  Please contact our technical support at the 800-474-6836. Customer support can also help you to get a new printer. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• PROBLEM WITH THE CONFIGURATION OF THE FAX MACHINE SINCE THE EVOLUTION OF BRIGHTHOUSE - HP PSC 2410 PHOTOSMART ALL-IN-ONE

  Good afternoon... On pages 116-118 of the manual "how to choose the right Fax Setup... »,

  1] I do not have a distinctive ring

  [2] receive voice calls in the same phone # I'll use for fax calls

  [3] I have a modem from pc on the same phone line as my HP PSC.  I HOPE THAT I INTERPRET THIS RIGHT.  IS A PC MODEM THE SAME THING THAN THE PC ITSELF?  I HAVE NO SEPARATE MODEM EQUIPMENT.

  [4] I have an answering machine that responds to voice calls in the same phone number I use for fax calls - the PROBLEM SEEMS to BE THAT MY answering DEVICE IS ATTACHED to MY DIGITAL PHONE so I don't KNOW whether TO ANSWER YES OR NO to THIS QUESTION.  INSTRUCTIONS DATA FOR "CASE G" FOR VOICE/FAXLINE SHARED WITH PC MODEM AND answering MACHINE SHOWS THE RESPONSE

  DEVICE AS A SEPARATE FROM THE PHONE.

  [ 5] I do not subscribe to voicemail through my phone company

  [6] I don't have DSL

  I answered YES to questions 2, 3 and 4. Should I answer NO to question 3 or 4?  Sorry, I'm confused... Help, please...

  Depending on your region

  You may want to consider high speed

  Internet and be much faster and

  You can get updates on your computer

  HP and Microsoft and may not be

  long tied up extreme for the update

  update the file are huge

  It will be always up to date

  OK B2B

  go to the store and ask the

  phone switch

  one that you can put the fax, phone and computer

  on the same switch box

  check the amount of the adjustment ring

  and you can set the number of rings

  Good luck

• HP psc 2410 photosmart all-in-in-one analysis options are not defined

  Hello

  I have a PSC 2410 photosmart all-in-one printer and have just changed my desktop (Win 7), I can print ok but when I press the button of san, it says "scanning options are not put install or run device software. The problem is I lost the installation CD and want to know if I can download it from the HP website.?

  Thank you

  Kini1108

  Try here to download your essential software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=303753

• How to enable print double-sided on 6520 photosmart all-in-one

  How to enable duplex printing on 6520 photosmart all in one running on windows 7

  The Photosmart 6520 support automatic duplex printing.

  You can follow the penlow stes to set duplex printing:

  http://support.HP.com/us-en/document/c03476083

  Shlomi

• How to clear memory fax on a hp psc 2410xi photosmart all-in-one for security reasons. ?

  Any help with this would be appreciated. I used this years a lot of printer/fax/scanner.

  For individuals and businesses to print/Fax/scaning.

  I want to erase all the memory information before giving it away.

  I realize that it probably only recorded information about the fax memory, but still want to clarify.

  Hi Skyhawk7,

  Check your Inbox to forum for more information reset.

  * If you find this useful or mean please make sure you click on the White Star under my name to give me congratulations. **

• How can I scan documents 6520 page muliple photosmart all-in-one

  I can only scan one page at a time.  I want to scan a complete document.  How with a 6520 photosamrt

  In fact, I discovered how to scan multiple pages.  start the computer and click the hp desktop scanner (place it in your list) on the page there are two small - hard to read the squares on the lower left.  the far left on allows several pages, but keep you will be asked if you want to replace the existing analysis.  then you get pages added.

  I just found this by trial and error.  I created a special folder for the scans so I can save on computer and check before you attach to an email.

  Giacomo

• HP psc 2500 photosmart all-in - one

  I can't button 'on' to stop flashing

  the machine won't let me print or copy because of the flashing 'on' light

  Hi pred.

  Is there an error message on the printer in most power light flashes? I suggest to let the printer and unplug the power button for 1 minute, then plug it in again. Now let's see if the flashing light stops and you can print.

  If the problem persists and you have a Windows operating system, start printing HP and doctor Scan to see if it can help us identify the problem. Click here to download and run the utility > HP print and Scan Doctor.