How to install a video instead of chipset card?

Hello

My problem is this: I have a Compaq Presario CQ5011IT which has an integrated Intel G31/G33 chipset, and I wanted to install a video card (GeForce 210) instead.

I read that I had to install the card into the appropriate slot, turn on the computer and install the drivers that were on the CD given with the card, and then at some point during the operation the old into the new card should I past the video cable...

In any case what happens is that when I install the video card, I turn on the pc and nothing appears on the screen (apparently the chipset is automatically disabled just by inserting the video card?), so I can the to proceed to installing the drivers, and obviously I don't see nothing, even if I plug the connector of the new card card (that the drivers are not installed).

So, what should I do? Is there a way to fix this? Maybe I should install the drivers before placing the card?

I don't know if these details are important, but the motherboard is an MS-7525 and is 300W power supply (+ 12V said 19A).

I hope that there is a way to solve this problem!

Thank you very much

Elena

Hey Elena,

The only thing I can think of right now is that the Nvidia card supports PCI-E 2.0 and even though it is backward compatible with PCI-E 1.0, for some reason your motherboard is not recognized correctly.  This would explain why the old ATI card working as it is probably PCI - E 1.0.

However, if you click on the link below, it seems to be that a specific Bios update that address the problem with this particular card.

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-73126-1 & LC = on & DLC = in & CC = US & Product = 3921638 & sw_lang = & os = 2093 & Key = null & site = null

Important.

Download the update and save it to your desktop. Have not the new trendy card (IE have the PC in the State wherever it was when you bought it).  Disconnect other devices on the PC except the mouse and keyboard, double-click the installer to start the process, and once the update starts to run do not touch the PC until it stops.

When finished, restart the PC (still without the new card installed) let windows start fully and then shut down the PC.  All you should have to do now is install the new card, connect the monitor to it and start the PC.  I hope it should work properly now.

Best wishes

DP - K

Tags: HP Desktops

Similar Questions

  • How to install latest video drivers

    How to install latest video drivers

    Go to your computer manufacturer's website and download them and install them. If you need assistance finding the right drivers, you must tell us the number of brand and model of your computer and the operating system installed.

  • How to install facebook video call in windows 8

    I just want to ask how to install facebook video call in windows 8, because when I try to install it, message: you cannot run this program and try to find in applications.

    Hi Dave,.

    Welcome to the Microsoft Community and thank you for the post.

    From the description, I understand that you can not install Facebook video call on your computer with Windows 8.

    We need some information from you on this issue.

    (1) what is the full exact error message?
    (2) what version of Facebook video call you trying to install?

    According to our Facebook video call records is compatible with Windows 8. There are two version of Facebook video calling Version 1.2 and Facebook video calling Version 1.1 that are compatible with Windows 8.

    http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductDetailsViewer?Name=Facebook%20Video%20Calling&vendor=Facebook&Locale=1033&ModelOrVersion=1&BreadCrumbPath=facebook%20video%20calling&Type=Software&tempOsid=win8

    If you try to install another version then you must install it in compatibility mode. You can follow the steps here.

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    For further assistance, you can see the steps in the link here.

    http://www.Facebook.com/help/125103517575494/

    Feel free to write us if you have any other matter relating to the installation. We will be happy to help you.

  • How to install NVIDIA video drivers in a free WIN 7 VM on the VM workstation installation

    How to install NVIDIA video drivers in free installation of WIN 7 VM on the VM workstation?  When I try to run the driver installation package I get an error there is no hardware supported, even if the video card is installed and works in the reception of WINNING 10.

    Thank you

    V/R

    NVidia drivers must be installed only when using NVidia devices.
    You do not have in your virtual hardware NVidia machine - that's why he settled on your host computer, but not inside your virtual machine.
    Inside a virtual machine, you have a Videocard VMware - so you must install VMware-drivers.
    Appropriate within a virtual machine drivers will be installed if you install the "vmware-tools".

  • How to install a program on the SD card?

    original title: install the program on a sd card

    Can I install a program on a sd card and run from there, using it for more space? I know you can with a disc external hard usb but on a sd or flash card? I know you can do this with a long process by using an external hard drive, then copy the files to the sd card, but you can do it directly from the installation process.

    Hi Bob,

    Thanks for posting this question in the Microsoft Community Forums.

    I see you want to know how to install a program on a SD card.

    Let us work together to solve this problem.

     

    However, we need more information on this topic in order to understand better. Please answer this question.

    1 are. what program you referring?

    I wish to inform you that it is not possible to install programs on SD cards or readers of the pen. You can store the installation files on any external storage device and install it in a computer.

    Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    I hope this information is useful for you.

    Please go to us with answers so that we can help you better.

    If you have questions about Windows operating systems, email us. We are pleased to be of assistance.

  • How to install the video codecs on my computer to watch a Webinar

    I am trying to connect to a webinar and my computer says that I don't have a codec installed on my computer.  How do we install

    Are you a specific error code or any codec specific name or number while trying to watch the webinar? If Yes, then you can make use of these details to find the codec on the internet.

    The following links may be useful to learn more about how to install a codec:
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/how-to-locate-and-install-codec-for-video-files/469867bc-4C49-4b73-8d7f-bde6dedfbf90

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/need-codec/4cfccdce-CEF5-450b-92c9-f7296bc20098

  • How to install a driver for my graphic card updated, and where I would get

    How to install driver for my graphics card, and where would I get it?

    The site of the factory.

  • How can install windows mail instead of windows live

    I would like to use windows live mail instead of windows because I would like to add a yahoo also account.

    Elizabeth Jordan

    You don't need Windows Mail to get your Yahoo mail.
     
    How to set up a Yahoo! Mail e-mail account in Windows Live Mail
    http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/mailplus/pop/pop-02.html
     
     
     
     
    If you want, there is a way to hack in Windows Mail, but you may need to do from time to time. When SP1 came out it had to be re-hacked.
     
    How to restore Windows Mail in Windows 7
    http://www.SevenForums.com/tutorials/5481-Windows-mail.html
     
    How do I activate the Windows Mail application in Windows 7
    http://www.TechSpot.com/VB/topic137494.html
     
    To configure Yahoo in Windows Mail, you need a Yahoo Plus account.
    http://Overview.mail.Yahoo.com/enhancements/mailplus
     
    Set up Windows Mail to connect to Yahoo Mail Plus
    http://www.vista4beginners.com/Windows-Mail-Yahoo-mail-plus
     
    Windows Mail help is in this forum
     
     
     
     
  • How to install the video card drivers

    Difficulty in getting the drivers to be loaded with visiontek 9250 128 MB pci 9250128pupc on windows 7

    VisionTek 9250 128 MB using the Ati chip and unfortunately win7 is not supported

    http://support.AMD.com/us/gpudownload/pages/index.aspx

  • Satellite L510 - how to install the driver for wireless network card?

    Hello

    I recently bought Toshiba Satellite L510 laptop and problem in the installation of the wireless driver. I downloaded the driver from Toshiba sites.
    And installation get competed with success but it always ask for divers 'Network controller' and 'Askey for Toshiba.
    I'm trying different drivers of these last two days, but without success.

    Can someone Guild me please how to configure computer L510 laptop wireless. Also where can I get the drivers mentioned above.

    Thanks in advance.

    Hi mate,

    I m asking you to install the WLAN driver on your laptop computer purchased recently. Normally all the stuff is already preinstalled the operating system with all the drivers and tools. He s ready to use.

    However, what you mean exactly with her always ask for divers to Askey Toshiba network controller?

    Your wireless network card is listed in the Manager device correctly or yellow exclamation? What WLAN card you have?

  • Re: Satellite L300-147 how to install DDR2 667 2 GB memory card?

    I have the right part number to install memory for my Satellite phone but don't know how to do it. all the tips and tricks on how/where to open up the laptop and insert the memory card?

    Thank you!

    Chris

    Memory locations are generally accessible from the Base of the laptop.

    Find a door with a screw, remove the screw and lift the door. You should see two memory slots (with a free location according to the model).

    But you must make sure that your laptop can take 2 GB modules. I think that if you have a Celeron processor, the system cannot take more than 1 + 1 GB

  • Equium L20: How to install a wireless Mini-PCI network card

    I just bought a wireless card for my laptop my laptop did not come with any what wireless I got it all, so buttons in it to the wireless do I need anteater, if yes, how can I install it and would it void my warranty

    Post edited by: welard

    Hello

    You write on your laptop. Maybe your laptop isn't ready to install a minPCI wireless network card.
    But if it of possible to install so generally the slot card WLan should be placed at the bottom of the unit or under the keyboard.

    Then there must be the card only into the slot and then connect the two WLan antenna cables. As far as I know to connect the white cable to the hand and Brown to the auxiliary voltage

    Sometimes the Toshiba ASP should install the WLan card because of the validity of the guarantee.

  • How to save a video file on sd card or synchronization on pc/youtube

    Hello! I got the Droid since the beginning of the year and a few times where I recorded a video and tried to post on YouTube I always said 'Network error has no' even though I am clearly in a Wifi network. Is this because my phone expires before the video can finish loading? because they are 5 + minutes or is something more going on here? Super frustrated...

    While I tried to sync my phone to laptop Dell and get the video from there, and even after that I have 'mount', there is no files that open up on my Gallery. And I tried to save it on my memory supplied with the phone, but when you hold down on the video it comes even as an option 'share '. I can't email myself because the file is too large and I really need to get a video I recorded on it for school work.

    HELPPSSSS! THANKS THANKS THANKS YOUUUUUUU

    I can't post on YouTube, but if you have recorded the video on the phone, it will be quite easy to explain how to get it on your computer.  Once the phone is attached to your computer simply browse through the folder: folder DCIM/camera.  This is where the file will be located.  All photos and videos that are taken on the phone are saved in this folder.  Now drag and drop one you want on the computer.  I hope this helps.

  • How to install Esxi 5.5 on a card mother-GA-H97N-WIFI

    Hello

    I have some problems to install Esx on my new configuration.

    My configuration is:

    -Processor I5 4590S

    -GA-H97N-WIFI Motherboard

    -Crusial Ballistix Sport - DDR3 - 16 GB

    -GeForce Quadro 600

    -1 drive sata hard

    Whenever I tried to install esxi 5.1, 5.5 or 6.0, I have a black or pink screen with the fatal error.

    Has anyone an idea?

    Thank you

    Hello

    I finally found the solution, my RAM memory are defective.

    When I turned it off, I can install Esxi wells.

    Thanks for your help.

    Concerning

  • How to install the driver for a Raid card.

    I hope that this question is of you and yours.

    I have:

    ESXi 4.1 operational on a Dell 1950. He has a basic raid card that works. This is the functioning and VM are stored.

    I installed a 1212 4 Areca Raid port cards. I have attached two Intel SSD's in raid 1.

    My Bios sees both the original and the 1212 raid cards and disks.

    Areca at startup utility says that everything is swell.

    ESXi is unable to see the 1212. I went to the Areca website and downloaded the driver for ESXi 4.X.

    I followed the instructions for all upward using the CLI interface. He begins to apply the patch, but then I thought that a meta.zip file is missing and things are abandoned.

    I went to the site of vmWare and downloaded their solution. Once again using the interface CLI things start to download but then I thought that there was no update occurred or the boot. Nothing to do.

    Here is the link to the drivers of the Areca. The installation instructions are great, but for the meta.zip file.

    FTP://FTP.areca.com.tw/RaidCards/AP_Drivers/VMware/ESXi_4/

    Any ideas? Thanks for help.

    John Ullom

    I had a similar problem with the Areca 1222 (version 8 ports of yours).

    I was able to fix by changing the zip file of Areca. In the folder while offline connection-bundle, you will find some arcmsr ARC - 1.20.00.15.vmk.100202 - offline_bundle - 262812.zip. Inside that zip you will find metadata.zip. Inside of this zip, look for vmware.xml. Modify the file as follows:

    Find the following text:

    You should now be able to install the CLI.

Maybe you are looking for

  • Apple US can't access the store buys

    I was wondering if it is ethical moral for Apple to ban or to unnecessarily prevent access to my purchases in the App Store? If you have moved to another country and so most likely is not a valid payment to the United States after a certain period of

  • Keyboard on my satellite error - 'L' key seems to be stuck, forces logut

    Hello I'm fixing a satellite phone with a keyboard error, the 'L' key seems to be stuck permanently down, except that it's not! Also by clicking on the button start requires the user to be disconnected and returned the the login screen. The keyboard

  • Recent messages have problems (latest version 6.18)

    Hi, my recent Messages have problems, please consult, I click on it but I show message and I need to read, I wait to solve the problem in my recent posts. Thank you.

  • Satellite Pro P100: external display connected to DynaDock uses 800 x 600

    I have a P100 SatPro attached to a monitor external 19 "via a Dynadock. By default, whenever I start the laptop the screen resolution 800 x 600.I have to manually reset to my desired resolution (1280 x 1024, 32-bit colors).If I reboot at any time the

  • Impossible to use. as the delimiter text applescript

    Why the following applescript does not produce the result "c"? the value xxx to 'ABC' as string the x value of delimiters to point to the text of the AppleScript the text value of the AppleScript point delimiters ".» return the word 3 xxx the text va