How to install acrobat adobe pro DC when my macbook air does not accept the CD?

Similar Questions

• Hi - I recently bought a new iMac. I have a design Premium cs5 recorded which is an upgrade - I have no disk for cs4 but the qualifying serial number for it. I installed cs5 via download on my iMac, but it does not accept the ser

  Hi - I recently bought a new iMac. I have a design Premium cs5 recorded which is an upgrade - I have no disk for cs4 but the qualifying serial number for it. I installed cs5 via download on my iMac, but it does not accept the serial number. If anyone can help. Anyone who thinks that Adobe will lose a lot of customers with no chat or calling users cs5 support?

  You can support the serial number and activation support.

  Mylenium

• Why the MacBook Air does not recognize my Adobe ID?

  I have a paid Adobe ID.

  I would like to use to install the Adobe CC, I know to be available for a total of two computers.

  I am currently using, like many Mac pro.

  But there was a problem.

  I also have a Macbook air.

  MacBook air into account is not active.

  ID payment is complete and is active in the MacBook Pro.

  Not available for the MacBook Air why?

  The MacBook Air does not show the message log on another commitment signed in devices.

  Just again once this to tell me, 'make a payment '. But I already paid!

  Why the MacBook Air does not recognize my Adobe ID?

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• When I install acrobat adobe PRO XI, it converts everything on my computer to an adobe icon, and when I try to open it, it will open adobe acrobat. For example, I can not open word, excel, internet explore or any other document or program because he think

  When I install acrobat adobe PRO XI, it converts everything on my computer to an adobe icon, and when I try to open it, it will open adobe acrobat. For example, I can not open word, excel, internet explore or any other document or program because he thinks his acrobat.

  Hi Kate,.

  Please see this KB document for the solution Application, file icons change in Acrobat/Reader icon

  Let me know if the problem persists.

  Kind regards

  Nicos

• Hello: I need to install Acrobat Reader Professional 7.0. But it does not run automatically.

  Hello: I need to install Acrobat Reader Professional 7.0. But it does not run automatically.

  The installation program shows me a screen with a phone number and a series of numbers. When these numbers phone call asking me to go to the site. Does anyone know if this product can be set differently?

  If you have a license for Acrobat 7 (and it runs on an operating system), you can download the installer from https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml and activate it with the serial number given on these pages.

• When you try to insert a digital signature, it does not accept the password, I just reset.  How can I get include the signature?

  When you try to insert a digital signature, it does not accept the password I just reset for Adobe and will not let me. How can I determine what the password, it's who will give me access to insert the signature?

  Hello

  What is the error you get after inserting the password. Although there is no way to recover the password.

  You can simply create a new digital ID with a new password.

  Concerning

  Sukrit diallo

• How to transfer acrobat from one PC to another? I do not have the license # and CD on hand.

  How to transfer acrobat from one PC to another? I do not have the license # and CD on hand.

  You need to install. You will need these things.

• Windows XP Pro SP2 re - install does not accept the product key.

  I'm trying to re - use the product key on the sticker from the bottom of the laptop.  This is the same computer that was working fine until I decided to reinstall, but I use a different installation media because the laptop (a refurb) never came with the media.  Can I call MS and get it re-authorized?  I have XP Pro SP2 and XP Pro SP3 Reacondicionador media.

  You try to install Windows XP with OEM product key you have on your COA sticker. So be sure that you have a generic Windows XP OEM CD, because VLK or Retail CD does not accept the OEM product key.

• OfficeJet Pro 8500 does not accept the new cartridge

  My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,

  No problem, I understand.

  I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838

  With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.

  More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.

  Best.

• Remote device does not accept the connection since W7 re - install.

  Since then reinstall it W7 Pro, I'm now no longer able to map a network drive on a NAS on the network. The NAS device is visible to all other domestic uses (Sonos, Internet TV, etc) and can be accessed via the front view in a web browser without any problem. I can PING the device and don't get a response, so no problems with the device itself (which was untouched before, during or after re-setup of W7).

  Just cannot map a network drive!

  Tried to disable the firewall etc, but still no luck. Also checked that all relevant services are running.

  Someone has ideas that more I can do to get my laptop to talk to it as a network drive?

  When I enter the ip address of the NAS and click 'Finish' to the card, I get the following dialogue:

  The remote device or resource does not accept the connection
  The device or resource to 192.168.x.xxx is not configured to accept connections on port 'file sharing and printers (SMB).

  any help would be greatly appreciated.
  Thanks in advance.

  Hi Stuart,

  The question you posted would be better suited to the TechNet community. See the link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

  After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

  Hello Siegmud,

  Wende Dich wie oben und some showers a cat den, denn

  Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

  Hans-Günter

• I have a mac / downloaded adobe reader and does not accept the license agreement for end

  I have a mac / downloaded adobe reader and does not accept the license agreement for end.  It says successfully downloaded.  I'm going to use it and it won't work.  Told to close.  I opened adobe reader software and brings me back to install which I knocked again, and he says already installed.

  I closed out of all tabs, went to "safari" in the top of the page, clicked on close safari.  I clicked on Go, and then click applications, then I found adobe down and clicked on it.  then he gave me a place to click on accept.  I hope it works!

• I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it. Help?

  I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it.

  I tried the following:

  1 start with the R command and using disk utility that did say he had problems but then appear all ok after completing.

  2 tried the Verbose mode and did not work

  3. I tried command mode S did not.

  4. tried to zap the pram was not working.

  5 a couple other things that I had read, but nothing helped.

  It starts up and the line begins to show the computer made his 'thing', but gets stuck about 3/4 quarters of and goes no further. Would appreciate any suggestions.

  PS: also tried boot from the original disks as well, but no luck.

  You said "PS: also starting from the original disks tried both but no luck."

  Exactly what happened when you tried?

  Have you tried formatting the HD?

  Have you started the installation of SL?

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html