How to install and configure sbs 2008 on a routable network

Similar Questions

• How to install and configure the virtual machine with XP as an operating system on a Machine running Vista

  How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

  * original title - how to install and configure the computer virtual and XP operating system inside, with vista as my work machine.*

  How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

  Hey Preethi23

  It comes to the installation of vista operating system instance

  read the links below

  http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx

  http://www.Microsoft.com/Windows/Virtual-PC/support/FAQ.aspx

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

  Walter, the time zone traveller

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

• How to install and configure Essbase in System i or AS 400

  Hi all
  
  I have been instructed by my employer to install Essbase 11.1.1.3 AS 400 system. Can someone guide me that what and how I have to finish this task.
  
  I don't know how to install and configure Essbase in Windows but I never get chance to work on AS 400 systems.
  
  I have feedback promp hopping.
  
  Thank you much in advance.

  The old SPSS (now IBM) product lags Oracle a bit. I think that they jump system 9 altogether.

  I remember using the Essbase 5 (I think) version of it on an AS / 400 and the thought, he behaved exactly as an instance of Windows 'normal '.

  Kind regards

  Cameron Lackpour

• How to install and configure Analytics studying Oracle

  Hi all

  I downloaded the product delivery to evaluation. but I do not know how to install and cofigure them? I want to install it on windows 64-bit and oracle database 12 c.

  

  Thank you.

  Hello

  Don't know what you expect but in general there is a simple solution:

  -Open google.com

  -search for "Installation Guide for Oracle Business Intelligence Applications"

  -Click on the first link and open the official doc and it there a link is labeled "Setup Guide", which looks interesting

  http://docs.Oracle.com/CD/E53672_01/doc.111191/e53673/TOC.htm

  Everything is in the doc, do not expect an Enterprise Server application to be installed as Excel with a double click on a .exe, next, next, next & finish...

• How to install and configure hp psc 1402 everything - in-one

  How to install & configure hp psc 1402 everything - in-one

  Send how to install & configure hp psc 1402 everything - in-one

• How to install and configure an SSD 256 on my laptop HP ENVY 17-3290NR (3D)?

  I'd appreciate some advice how to add an SSD 256 (Samsung 840 Pro SSD 256?) to my laptop HP ENVY 17-3290NR (3D).  The laptop came standard with a 80 GB mSATA + 1 TB hard.  I would use the SSD 256 as the stand drive and install the operating system and programs on this drive and store all the data of the 1 TB HD.

  What should I do with the mSATA SSD 80 GB? Where should I install the SSD 256? HD slot-1 or slot-2?  Thank you in advance for your help and instructions on how to proceed.

  The current specifications: HP ENVY 17 Notebook PC

  • Name of the PC: HP ENVY 17 Notebook PC
  • Product number:

    (Personal information edited by moderator)

  • Serial number:

    (Personal information edited by moderator)

  • Operating system: Windows 7 Home Premium 64-bit Service Pack 1
  • Microprocessor: Intel (r) Core i7-3610QM CPU @ 2.30 GHz
  • Systems of memory: 16GB
  • Map of systems: 1852 71.14
  • System BIOS: F.0B
  • Hard drive 1: INTEL SSDMAEMC080G2H
    • C: 73.01 GB (6.31 GB free)
    • F: 1.22 GB (0.62 GB free)
  • Hard drive 2: WDC WD10JPVT-60A1YT0
    • D: 911.37 GB (866,27 GB free)
    • G: 20.14 GB (2.1 GB free)

  It's interesting. Normally a bootmgr error message means that the bootloader is corrupted and hard disk not 'dead '... Replacing the hard drive is a quickie shotgun method to solve the problem.

  Have you given up on the SSD?

  The office (w/ASUS Crossfire V formula-Z mobo) I use this type, has the same SSD that you asked. I used the method that I described in the previous post to clone the OS for the SSD. The SSD is the startup disk.

  

• How to install and configure mixed memory in PowerEdge R610

  Hello members,

  I had the following situation:

  • DIMM_A1: 2GB 2Rx8 RDIMMS
  • DIMM_A2: 2GB 2Rx8 RDIMMS
  • DIMM_A3: 2GB 2Rx8 RDIMMS
  • DIMM_A4: 2GB 2Rx8 RDIMMS
  • DIMM_A5: (empty)
  • DIMM_A6: (empty)
  • DIMM_B1: 2GB 2Rx8 RDIMMS
  • DIMM_B2: 2GB 2Rx8 RDIMMS
  • DIMM_B3: 2GB 2Rx8 RDIMMS
  • DIMM_B4: 2GB 2Rx8 RDIMMS
  • DIMM_B5: (empty)
  • DIMM_B6: (empty)

  Total, I installed 16GB and I'll add a memory of 16 GB RDIMMS, how do I use the maximum RAM?

  Thank you very much!!

  You are welcome. Reach out to us any time.

• Install and configure the Apache HTTP server plug-in

  Hello
  
  I use WL10.3 in a Linux machine.
  
  I have an environment where I have one WL server in a domain which is deployed with the web application
  
  And I have another area where I have two managed servers in a cluster that is deployed with the company.
  
  Now, I want to configure Apache HTTP server to make it work as a proxy with the weblogic.
  
  In my current scenario, the proxies of one seed server req in the cluster and that is defined in a jndi.properties.
  
  Now, what should I do if I want to use the Apache
  
  I have the following questions:
  
  1 forget my env, generally how to install and configure Apache HTTP plugin?
  I see that we have already seen libproxy_61.so file in /bea/wlserver_10.3/server/plugin/linux/i686
  
  Do I need to install the patch even then as said in http://www.oracle.com/technology/deploy/security/wls-security/2793.html?
  
  2. While am adding the lines in the httpd.conf file.
  LoadModule modules/mod_wl_22.so weblogic_module
  
  If I put ibproxy_61.so instead of mod_wl_22.so in this line?
  
  3. While configuring the proxy server, balancing and session replication will be assured?
  
  4. and for my setup, as stated at the beginning, a few lines, which may be the best architecture?
  
  Your help is really appreciated.

  Hi Subh
  1 so all external requests go to the single domain server with MoreWeb app. In this scenario, you don't need any additional Proxy Apache server. Because the basic concept of the Apache Web server is to route multiple applications on a cluster of managed servers. In your case, it is a single server, you don't need any additional Web front server. Now you have these EJB on another area that is clustered. I guess you use search standard JNDI to access the EJB. So, how do you make sure that only MoreWeb app requests are load balanced to the EJB. As each subsidiary request for EJB must go to MS1 and MS2 as robin in default mode. First request to MoreWeb need access EJB of MS1. Second request for MoreWeb need access EJB MS2 etc. This means in theory, you should have an Apache Web Server before the second area something like that. You have any servlet default weblogic cluster already deployed to the second area. Otherwise use that or care of apache in etc. Then in MoreWeb App when you search the EJB, make sure that you give the address Cluster and the direct port instead of the host/port MS1 or MS2. This Web server should in turn make the round robin for EJB on second domain clustered. When you get the InitialContext object instead of using empty default constructor as new InitalContext(), you may need to use something like InitalContext (aMap) new aMap corresponding to a hash table with the properties for the provider url, etc. etc. You can see the docs for more details. Here is the link for the EJB Clustering. See the section on EJB

  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103//cluster/load_balancing.html

  Hope this helps
  Ravi Jegga

• How to check if the database for DRDA gateway is installed and configured.

  Hi all
  
  How can we check if the database for DRDA gateway is installed and configured.
  
  Our operating system is AIX 5 L 64 bit OS.
  RDBMS: 11.2.0.3
  
  Kind regards

  Duplicated
  How to check if the database for DRDA gateway is installed and configured.

  + - locked thread-+.

  Nicolas.

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• my computer does not have an installed and configured wireless network adapter

  I just installed a new hard drive on my computer of dell inspiron 1525. I am not very computer but I managed to do it and it works. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However, I can't connect to the internet. He always tells me that I have not installed and configured wireless network card. When I go into computer management, there is no network adapter. There are "other devices" which device base system list three times with properties that say that the drivers for this device are not installed (code 28) but it won't let you not reinstall drivers and to be honest, I don't even know what the "other devices". There is also an ethernet controller that says the same thing. A network controller and the properties say he has not configured corr. (code 1) but won allow you to install because windows cannot find the driver for the device. He says that if you know the FAB of the device, you can visit the site Web-manufacturer of this device? As you can see, I'm not very computer. So, how can I connect to the internet. I have Verizon wireless at home. Thank you.

  well, I think that I thought about it. I right click on each of them separately, and I think I can have it now.

  Thank you

• Wireless network adapter is not installed and configured

  I have recently re installed windows vista for my laptop dell inspiron 1545. I am not able to connect to wireless internet, it says that the wireless network adapter is not installed and configured. How do I install it and where can I get the wireless network adapter. I have a cd or anything for it. Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shouldget from Dell for the wireless adapter at all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. > http://support.microsoft.com/kb/244617.

  The adapter is inside the laptop.  You don't need to do something with it to install it.  Install the drivers, firmware or software for it and your version of Vista from Dell (all that apply) "install".  You must then go to start / Control Panel / Network and sharing Center and configure the adapter with the appropriate parameters and to establish the appropriate network connections.  This will take place in settings required by your ISP, and maybe your router or modem (so you may need to contact them if you don't know the settings).

  Here are the procedures for Vista with Windows7 network layout that can help:http://www.windowsnetworking.com/articles_tutorials/Windows-7-Understanding-Network-Administration-Configuration.html.

  Here is another article on home networks (with several links to related articles which must all be considered - as well as others, you will find in the related articles) to help you better understand the home networks: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.  If it's for Vista, much of it applies to Windows7 (although there may be some differences that should be addressed in the previous article).

  Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  As I am unsure of your Setup, I've included several items that can help depending on how you are setup.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• OS installed and configured

  How to list all virtual machines and their operating system installed and configured?  In other words, the type of OS virtual material has been configured for and type of OS that really settled.

  Thank you!

  This should do the trick:

  Notice-EEG - ViewType VirtualMachine. Select Name, @{Name = "ConfiguredOS"; Expression = {$_.} Config.GuestFullName}}, @{Name = "GuestOS"; Expression = {$_.} Guest.GuestFullName}}

• What role must be installed and configured the server MRS

  Hi friends,

  What is the role for the domain user account Windows is needed to install and configure the server MRS?

  Should the area of employment must be the local administrator of Vcenter serere?

  Thank you

  Hello

  According to the MIS Program administration guide, you must be administrator to install SRM.

  In addition, my experience on Windows 2008 R2, you must click on the installer and choose "Run as Administrator", otherwise intallation process will be blocked.

  Michael.