How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?
How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?
XP drivers for XP, NOT of Windows 7...
Go to control panel > devices and printers > click on "add a printer".
The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".
A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.
Click on 'NEXT' and follow the installation instructions...
original title: Error Message 0 X % 1 in the message file for %2
I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get the above error message.How I can fix
1. what email program are you using?
2. you are trying to download from webmail or any mail client?
3. don't download you and save the attachment or open it directly?
4. What is the brand and model of the printer?
I suggest to save the attachment and then print.
I'm looking for the driver for canon cp400 pour windows 7
See this page to select your language:
Or sorry that it is area English.
Left click at the bottom of the Microsoft Community page
English and set your language.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
In the name of Allah
I am Ali from iran.i am IT (e_commerce) iran student.in I cant't buy the original windows cd and I need to buy a copy of it.i dislike violate copyright.i want to ask who I have allow you to use the copy of windows xp service pack 2? This copy is about $ 3 if it is the other way to use windows xp service pack 2 in iran, please, say it.
Thank you very much.
Microsoft recommends not to use a pirated copy of Microsoft Windows XP on your computer, you must purchase an authentic copy of the operating system of Microsoft store and install on your computer.
I suggest you visit this below link provided to download the genuine Microsoft products.
To visit the Microsoft store:
Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.
Can I use Windows XP Service Pack 2 with Windows Vista Windows Live Mail? Windows Live Mail is slow what it is first.
can I change the Windows Live Mail to Internet Explorer without losing files in e-mail. If so, please send the instructions of deteiled.
Thank you oldknight59
(1) what do you mean 'Can I use Windows XP Service Pack 2 with Windows Vista Windows Live Mail' ?(2) who is the provider of mail service?For problems with Windows Live mail, please ask your question in the windows live forumSuggestions for a question on the help forumsAnswer with the information required to help solve the problem.
I had to reformat my hard drive of the computer. I am running Windows Vista Home Premium and try to update to Windows 7 Home Premium. I saved my files for a western digital 500 gig external hard drive that does not load the drivers in Windows Vista and do not see my drive on my computer to transfer my saved files. All the files that I see in microsoft tell me how to load sp1 but do not include a link to get the update for service pack 1-vista 32
Windows Vista Service Pack 1 (SP1) - 434.5 MB
Windows6. 0-KB936330-X 86 - wave0.exe
Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 726,5 MB)
Windows6. 0-KB936330-X 64 - wave0.exe
Windows Vista Service Pack 1 - language standalone DVD ISO
6001.18000.080118 - 1840_iso_client_sp_wave1-FRMCSP1_DVD. ISO - 1418,1 MB
Important: things to know before you download Windows Vista SP1
Learn how to install Windows Vista Service Pack 1 (SP1)
Learn how to install Windows Vista Service Pack 2 (SP2)
Information about Service Pack 2 for Windows Vista and Windows Server 2008
Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
How to get the latest Vista Service Pack
I have a Photosmart 7762 printer attached to a NAS box (with wiring everything very hard to go to the behind the various units of the office) and want to be able to print to it a new PC for Windows 8.1 that is installed (with difficult access to the wiring) in a separate room, but on the same network.
The HP site for the printer says that I have to use Windows Update to obtain the driver, but this only works if you physically connect the printer to the PC which is not an easy thing to do in this case.
Did anyone know where I can get hold of the driver so I can use the "disc"? I could not find anywhere. If not, does anyone know how to copy the driver to an existing installation of Windows 7 (on a laptop), I could connect) and the question of whether it works?
Follow the steps listed in the download for later use or use on another computer below, it will allow the download of the INF and install those manually, be sure to follow the link to Microsoft that explains how to locate the right package and extract it:
Cannot install the driver on windows 8
I was indeed able to correctly install the driver Windows 7 on Windows 8.1 (x 64). I downloaded the V4.0 - German pilot (since it's my native language) page of Canon and used Compatibility Settings (Windows 7 + admin) Support and the executable installed the driver without worries. After the Installation of the printer showed normally and I am able to print photos using Version 8.1 Windows of the guns 'ImageBrowser Ex' (which I installed in front, requiring "Run as Administrator" too, otherwise indicating a failure during install).
I have the yellow warning against the Sm Bus controller triangle in Device Manager when I try to update the driver it is not found can help you. I did a search on the forum for SM bus controller nothing helps.
See you soon
If you want to discuss these problems you must provide some basic information like the model of laptop and operating system preinstalled, so we can check the Toshiba download page and see which driver is available here.
Furthermore, have you installed driver right chipset for your machine and your preinstalled operating system?
I'm a good driver, but there is no driver for my phone
· What is the model number of your Samsung phone?
You can download the drivers from the link below
If not, contact their support: http://www.samsung.com/us/support/
Mr President, I have an unknown model of intel webcam and I have windows 7 pc and I want to install on my pc. but I need training to do this. pls help me to install
Go to start/programs/Windows Updates - check for updates and watch the optional updates, you might get lucky. (Have the web cam attached)
What is an external webcam? If so, you can identify the model with a broad search for images of webcams from intel.
If it is integrated with a screen on a laptop go on the web site to the search for your model and check for drivers.
I have this portege, but the CD is not installed (cdrw). I don't have the software - and finds him outside the broken Web links. When I plug it in, it says that I need the freecom pcmcia ide driver. I need the cd-rom to install things like the internet - but my other laptop is not a floppy drive and I can not install my USB on the portege so I can not port on any drivers/software in any case.
What should I do? I am at a loss
Have you checked the page of the Toshiba driver?
check under: Options - cd/cd-r/dvd drives - freecom, freecom cd - rw PCMCIA cdrom
I installed the software for this adapter wireless instructions. But although she is supposed to work with XP, when I try to use the adapter it does not work. At first my computer has not found the driver (even though it had been installed and the CD is inserted). I tried to download a new driver from TrendNet, but it's the exact same on my installation CD.
I moved the adapter to a different USB port and all of a sudden he seemed to start installing the driver, until halfway through the installation I had the BSOD. It took about 5 tries to restart, and my computer restarts only without the adapter. As soon as the adapter is inserted into any USB I get the BSOD again.
I have a wireless printer and that you really want to give my office wireless capabilities. Does anyone have a solution for this? Thank you.
I suggest to perform the clean boot and then try to install the drivers.
Note: Steps to configure Windows to use a Normal startup state
After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
- Click Startand then click run.
- Type msconfig and click OK.
The System Configuration utility dialog box appears.
- Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
- When you are prompted, click restart to restart the computer.
I need help for my printer to work with a new installation of Windows 7 Home Premium 64-bit. I had to reinstall due to a CMOS error, I think it was because of a dead battery. It could even be something else because I had other problems with this facility (explained below). In any case, the printer is a former Brother MFC 8300 (he was a workaholic!). Past times, I have re-installed Windows, there have not been any problems with this printer. I just install Windows Update driver (the driver is named 'Brother MFC8600/9650 Series' in Device Manager). But this time the installed "Windows Update" the driver and says that everything is working properly but when I go to "Devices and printers" it does not appear in "Printers and faxes" (as he usually does). FYI, there is a list for "USB Composite Device" in "Devices" that shows "Brother MFC8600/9650 series" as a scanner. Don't know what that means.
I also tried to manually download the driver of 'catalog.update.microsoft.com '. I downloaded 2 different versions of the driver. It has a size of 2.0 MB file and the other has a 2.3 MB file size. I found myself by installing do not either because I didn't know where the appropriate destination location has been using the 'Expand' of the 'Command Prompt' command with "expand
-F: * "." I think that the file for the "Windows Update" file size is 2.1 MB (my memory is not the biggest however).
I am running as a "Standard user", but I installed all the drivers of devices as an administrator. I also noticed a problem with an application that I used before this re - install, "Ultracopier. On installs previous he has installed fine and he demanded 'Administrator' rights after the start. But during this installation, it did not work at all and did not 'Administrator' rights after the start. I also had problems with a 2 to external hard drive related to the permissions and access to certain files and folders. I don't know if any of this matters but I thought that the more information the better.
I hope someone can help me with this because I really need this printer to work.
Sorry for the late reply.
I suggest that you restart the Printer Spooler service and see if that fixes the problem.
A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.
Please follow the steps below:
You must be logged on as administrator to perform the following steps:
- By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
- Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- Right click on the print spooler service, and then click Properties.
- Under the tab general , next to Startup type, make sure that Automatic is selected.
- If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
For more information, please see the link below:
If you are still facing problems while using the printer, I suggest to uninstall the driver again and install all the optional updates offered by Windows Update and then install the printer drivers if not included in the optional updates and see if the problem persists.
To install optional updates, follow the steps below:
- Press the Windows key + R
- Type wuapp
- In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer
- If updates are found, click on view available updates.
- Select the optional updates, and then click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Hope this helps, get back to us if you need further assistance for Windows.
After the download and launch the program, he "extracted" to 100%, then disappears. The installer has simply never opens a dialogue window. He continues to run forever. Does anyone have a solution to this problem?
I tried to clean up the registry by using the WinThruster and the Windows Fix - it, application software, but failed.
Her pinter works well from other devices that are connected to the same network.
I spend 2 days on this issue and, therefore, your help and support will be much appreciated!
Best regards, Jan
Follow the steps below and check if it solves the problem:
1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
7 restart your PC
8. run the installation file and check all difference.
9. Once you have finished, remember to open McAfee and re-enable real-time scanning.
If the steps above does not help to solve the problem, open the Device Manager and devote the processor category, if you have an AMD processor trying to install the patch below:
Maybe you are looking for
I just bought the Toshiba Equium A100-338. I have heard from my ISP with Vista and internet explorer 7, I won t be able to download anything on it it won t accept. They also said that it will be only explorer6.my running on computer runs on windows X
Hi Ppl, I call a set of VI dynamically using call-by-reference node. And I have a type specifier linked to a component of a particular type connector. But at the time where the VI prototypes do not math I get the error from the open VI reference node
Trying to install HP Laserjet P1102w on Dell desktop running Windows 8.0. The installer always stops and says to connect the printer by USB, but it is already connected and turned on. Had to remove peripheral devices after he worked temporarily, but
Tried to install the program Microsoft Office Accounting 2009, the journal failed indicates a problem with the MSXML 6 SERVICE PACK 2 (KB854459). Attempted to fix it, couldn't fix it or remove it from my system. MY system is a Dell XPS 410 with Q66
A few days ago, I installed a driver NVIDIA update in the updates of windows. Since then, I have had problems with the video screen goes blank. Whenever I was forced to do a power cycle to recover. Several times. After awhile, I had to reinstall W