How to install Photosmart B109n-z on a DHCP network wireless

I'm trying to install a HP Photosmart B109n-z on a wireless network.

There is no DHCP server on the network.

I can install and print using a USB cable.

When I try to reconfigure the display of the USB wireless I get a message that says printer

use the IP 169.254.95.189 which is not compatible with the address IP of the PC 10.1.9.1.

HP documentation * recommends * using a DHCP server. So I guess it's * possible * for

do without. But I have found no instruction to do so.

There is a related announcement with the following title:

> Resolved: Photosmart B109n-z - setting a static IP address on the printer on an active DHCP server router
> 04/01/2010-11:24

That the display shows:

> Type the IP address in a browser.  You will see the internal settings of the printer.

But when I go to http://169.254.95.189 I have a connection delay.

169.254.95.189 ping succeeds. When I run a tool of command ' arp - a', I can see the printer.

The above has been done using a Windows Vista-based computer. To get a second opinion, I started a Linux machine

and did a ping 169.254.95.189. Which failed. Then I did a

> Add a route - host 169.254.95.189 gw 10.1.6.1

10.1.6.1 where is my wireless router. Then ping succeeds but looking upward of http://169.254.95.189

still gives a timeout.

So my main question is: how to set up printing on a DHCP-less network wireless.

And a second question: the printer is supposed to listen on TCP port 80 (http) or a magic

necessary to turn on.

IP STATIC ASSIGNMENT HOWTO FOR HP PHOTOSMART B109n-z

The following instructions allow to assign a static IP address on an HP Photosmart
Printer B109n-z without using a DHCP server, and without using a router. The
statements can also be used for other types of printer setup.

Necessary equipment:
-A HP Photosmart B109n-z printer
-A computer with a wireless network card

Laptops usually have a wireless network card. Stationary computers
usually not.

1 BACKGROUND

B109n-z has four ways to communicate with others:
(1) there are buttons and a small screen on his forehead.
(2) it can print and scan pages
(3) there is a USB connection
(4) it has wireless capabilities.

We will use (1), (2) and (4) to set a static IP address.

2 BUTTONS AND DISPLAY

If you're reading this, chances are that you tried to install the B109n-z and that
the installation failed. The installation may have left the B109n-z partially
set up, so the first step is to bring the B109n-z to its initial settings.

On the front of the B109n-z there is a small screen. To the left of the
It is a column of three buttons. To the right of the screen, it
is a column in addition to three buttons.

In fact, the buttons are just touching sensitive areas next to the screen. Each
button's background light that the printer can turn on and off. During the
light behind a button is disabled, the button is invisible.

The buttons in the left column are labeled with an arrow to the rear, an 'X' and
a symbol "OK." The buttons on the right hand column are all labelled with dashes.
To the market, the screen displays something like this:
Scan
Photo
Copy

The background light of all three buttons in the right-hand column are on. Now press
the button to the right of "Scan", i.e. the highest button in the right column.
Now, the screen displays something like this:
Wireless menu
The scan to PC
Scan to memory card

Now, press the button to the left of the menu "wireless" to get this:
Turn off wireless
Wireless configuration
WPS

This option enables the radio into the printer. The screen comes down to this:
Turn off wireless
Wireless configuration
WPS

Now press the button next to "Wireless Setup", then press
the lower right button until something like 'restore wireless settings' is
selected. Then press 'OK' (the button at the bottom left) and answer 'Yes' to 'are '.
"ensure that" issues. Now, it comes down to this:
Enable wireless
Wireless configuration
WPS

Finally, if the wireless radio is turned off, turn on the radio wireless with the help of the
button at the top right.

Now, the radio of the printer is on, the printer has an IP address of 0.0.0.0, as well as the
printer Wireless Announces that he runs a computer-to-computer wireless
(ad hoc) network without security. The SSID of the network is "hpsetup".

3. CONNECT TO THE PRINTER, STEP 1

Now, you need a computer with a wireless interface card. Ensure that the computer is
on. If the computer runs windows, ask for a list of available wireless
networks. If she runs something else, do something similar.

In the list of available wireless networks, you should find a named
"hpsetup". Connect you to it. Ignore the warning that the network "hpsetup" is
situation of insecurity.

If there is more than one network named "hpsetup", one of them will be your
printer and the others can be printers in your neighborhood. Those of other
could also be the work of airborne viruses that have infected your neighbors
computer.

4. PRINTING CONFIGURATION

If you followed the instructions above, the display will show this:
Enable wireless
Wireless configuration
WPS

Select "Wireless configuration", let "print the network configuration page.
selected, then press OK. The printer now prints a page that says things like
this:
IP address: 169.254.95.189
Subnet mask: 255.255.0.0

5. CONNECTION TO THE PRINTER, STEP 2

Now assign the same subnet mask and IP address similar to laptop you such that:
IP address: 169.254.95.190
Subnet mask: 255.255.0.0

The operation of bitwise AND of IP address and subnet mask of the printer must be equal to the operator AND the IP address and mask subnet of the laptop.

You need to know how to set the IP address and mask of the subnet on your laptop. If you have struggling to survive on a network without a DHCP server. But if you need an update: go to the 'properties' of the network connection and choose the TCP/IP settings.

Now open a web browser such as Internet Explorer, Firefox or whatever and look for http://169.254.95.189

Now you can set up the printer using the web browser as an interface. To set a static IP address, do the following for example:

-Click on the Networking tab
-Choose wireless along the left side
-Choose the IPv4 tab
-Click on the manual button IP
-Enter the desired IP address
-Enter your subnet mask (255.255.255.0 unless you know otherwise)
-Optionally enter an IP of the appropriate gateway (see INFRASTRUCTURE NETWORK below)
-DNS leave empty
-Click 'apply '.

When you click 'Apply' you of course lose the connection to the printer.

Now close the web browser, set IP address and the subnet of the laptop to what it was and try to connect to the printer using any IP you assigned.

6. CHANGE NETWORK INFRASTRUCTURE

If you want to change an ad hoc connection to aid in making a
network infrastructure, you need a wireless router. Ensure that the
The gateway of the printer IP is the IP address of the router in Section 5 above.

You can now install the software on the CD supplied with the printer. If you have previously installed the printer simply to connect a USB printer,
the USB cable, insert the CD and reconfigure to wireless technology.

During the reconfiguration, you will be asked which network to use. Select your
own network (that of the router to use). Do not select the
ad - hoc hpsetup network.

Tags: HP Printers

Similar Questions

  • Portable HP2000 - fresh install Win7 32 - is not correct controller network / wireless network drivers

    I just did a fresh install 32-bit Windows 7 and can not find the right network / wireless network drivers. Unable to connect to the internet.

    I tried all the current drivers found on http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=5118...

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01
    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C
    PCI\VEN_14E4 & DEV_4727 & CC_028000
    PCI\VEN_14E4 & DEV_4727 & CC_0280

    Win7 32 bit

    AMD APU E-450 WITH RADEON HD GRAPHIC 1.65GIG

    Hello:

    This wireless driver should work...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  • How to install the drivers for the hp deskjet F4500 wireless printer?

    Troubleshooting says I need to install a driver, my printer is offline and I am unable to do it online.

    He showed this: Hp color laserjetCp2025dn no driver and hp deskjet F4500 no pilot, said to install the drivers, but I don't know how to do this, any help is appreciated, thanks!

    Hello

    Check with HP, their drivers support and documentation online and ask in the Forums of HP.
    HP has excellent information on pilot facilities.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How to install an Officejet 8100 printer on a network hybrid?

    Hello

    I want to buy a printer Officejet 8100 to use on my home network. My desktop PC has Windows 7 64 bit and is connected to a router via the Ethernet cable. I also have a 64-bit Windows 7 notebook, which the network access domestic wi - fi. The Office is located close to the router and the printer.

    After reading the 8100 installation instructions, I intend to do the following:

    (1) install the 8100 hardware, cartridges, etc.

    (2) connect the 8100 to the router using an Ethernet cable.

    (3) install the 8100 drivers and software on my desktop PC, and shows the steps on installation instructions "wired network (Ethernet).

    (4) install it 8100 drivers and software on my laptop and shows the steps on the installation instructions 'Wireless network '.

    Is it OK? Is this the right method of installation the Officejet 8100 on a hybrid network?

    See you soon!

    You can plug in any way. You don't have to use an ethernet cable to the printer. You may be prompted to temporarily connect a USB cable to transfer the wireless settings. The link of the document I have provided has enough detailed instructions on how to connect using two methods

  • How to install drivers for computers connected to a network?

    Original title: install the printer driver for a network

    I am trying to download the drivers customized laptops, connected to a xerox business center.  My question is what I have to install them directly on laptops, or could I use a centralized machine and just let laptops are access pilots it or do I need to install drivers on each individual computer?

    The central machine is XP, laptops are all machines in W7.

    Hello

    The computer is connected to a domain network?

    You must install individual drivers for computers connected to the Xerox business center.

    If it's on a domain network, I suggest you to contact the TechNet Forums for any other help.

  • Satellite L20-197: how to install and start Linux Gentoo of Lan

    Hi, did anyone know how to install and boot linux (gentoo) of the network (lan)?

    Use the http://www.gentoo.org/doc/en/handbook/2006.1/handbook-x86.xml?part=1&chap=2 LiveCD

  • HP Photosmart B109n-z (printing problem) Please help

    Hi all

    I have the HP Photosmart B109n-z printer and put up wireless and it works fine I had no problem with him.

    The other day the black ink stopped working - the cartridge is not empty but it's is no longer black prinking on all documents.  Since I put all new cartridges in, he acknowledges them all, including black, and if I print something like a word document, and then it moves as if printing but the page comes out blank - no black ink is used.

    I work for myself, and work at home, it will get this resolved as soon as possible.

    I checked the cartidge - it's good.

    I checked the connection and the Bay print cartridge - they are clean.

    Help, please.

    The color works fine.

    The issue of black ink is the same print, scan or copy.

    And I have tried turning everything off and on again!

    Hello

    You could try the Solution 5 in the document troubleshooting that I am a link here:

    Quality of ink troubleshooting

    This will show the colors that are printing.  There are also additional troubleshooting steps to follow

  • How to install a network of toWIFi MiFi 2200 datajack

    How to install a datajack 2200 to a WiF network?

    Hello

    You can see the following link to Datajack official site where you can find the document of the user in the lower right.

    http://www.datajack.com/support

    These documents to the user and check if that helps.

  • How to install the HP Photosmart D110 printer

    How to install a HP Photosmart D110 printer on my computer laptop gateway?

    This printer does not appear in the options when I try to add a printer.

    Hello

    Check with HP Support, their drivers and documentation online and ask in their forums
    where there will be others with the same model and there may be known issues.  As
    OEM HP is responsible for the good operation of the printer and their drivers.

    There are two versions of the HP - PhotoSmart D110 - a and b

    HP - PhotoSmart D110a
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=4023246

    HP - PhotoSmart D110b
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=4144493

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • photosmart HP: how to install a hp photosmart c4485 on my laptop with windows 8

    help me before go me crazy!

    dopeygazza

    Welcome to the Community Forum of HP.

    Your printer support page:

    Range of all-in-one printers, HP Photosmart C4485

    The full feature software is in the section software and drivers for your operating system

    Category product driver software installation

    Click on more details

    If you need help to install, click on the tab "how to install".

    =======================================================

    The user guide for your printer - read this:

    HP Photosmart C4400 all-in-One series User Guide

    The following also provides help and information:

    Install the full features software - printer

    Click on the thumbs-up Kudos to say thank you!

    And... Click on accept as Solution when my answer provides a fix or a workaround!

    I am happy to provide assistance on behalf of HP. I do not work for HP.

  • do not know how to install the HP Photosmart c4480 print cartridge

    do not know how to install the HP Photosmart c4480 printer cartridge

    To add to what DavidML posted. Here a link to a page that shows how to replace the cartridges of your printer model. It has videos and step by step instructions. I hope this helps.

  • How to install a PHOTO HP 564XL ink cartridge in the printer all-in-one HP Photosmart 6525?

    I have a HP Photosmart 6525 all-in-one printer.  I buy original HP 564XL ink for my printer in a color combo-pack at my local Costco.  The package includes 3 color cartridges as well as a 4th label "Photo".  My printer has only the slots 3 color + a location for a larger black cartridge. I would use the photo cartridge, but my question is:

    How to install the Photo cartridge?

    Thank you in advance for your help!

    Hi l_john,

    I understand that, with the combo, pack of ink you bought came with a Photo black cartridge, and you're wanting to use it in your printer. In regards to your printer, it is not compatible with the black cartridge Photo, both black and Photo black cartridges are not interchangeable. I have included a document here for you that explains this in detail.

    Thank you.

  • How to install HP photosmart C7250 on windows 7

    How to install HP photosmart C7250 on windows 7?   Is it possible to use the HP photosmart C7250 printer with my new lap top running Windows 7? Thank you.

    Drivers and updates can be downloaded from the website of HP here.

  • Error creating HP Photosmart B109n wireless Mac

    I am trying to configure my B109n for wireless printing, but the installer crashes.     The printer is USB connected, but I want to move it to another part of the room.  I'm Runnin' OSX 10.9.2.

    Process: HP Setup Assistant [8324]

    Path: / Applications/Hewlett-Packard / * / HP Setup Assistant.app/Contents/MacOS/HP Setup Wizard

    ID: com.hp.SetupAssistant

    Version: 2.3.12 (2.3.12)

    Code type: X 86 (native)

    Parent process: launchd [163]

    Responsible for: HP Setup Assistant [8324]

    User ID: 501

    Date/time: 12:58:57.895 2014-04-02 + 0100

    OS version: Mac OS X 10.9.2 (13 C 64)

    Report Version: 11

    Anonymous UUID: CD4CC37E-A4CF-B07A-F990-87DC5CF774FD

    Sleep/wake UUID: 43C5067B-3BE5-4FF0-9A93-860D83D611CB

    Crashed thread: 0 dispatch queue: com.apple.main - wire

    Exception type: EXC_BREAKPOINT (SIGTRAP)

    Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

    Request for clarification:

    Run @selector (performContinue ACMCustomButton 0x3592b0 sender)

    Dyld error message:

    Symbol not found: _WirelessIsAvailable

    Referenced from: Hewlett-Packard/Applications / / * / HP Setup Assistant.app/Contents/Plugins/WiFi confirm Settings.WiFiPlugin/Contents/MacOS/WiFi confirm settings

    Intended for: /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211

    Hi PaulEich,

    Welcome to the HP forums!

    I see your message you have a Photosmart B109n you need to connect wirelessly to your Mac running 10.9. Absolutely, I'll do my best to help you with this!

    I think that the software fails is because it has not provided be used with OS 10.9. At this time, HP does not have software complete features, you will need to install it via the Apple updates. Which leads to the next question, how do I connect the printer to your wireless network. To do this, we need to connect the Mac to the printer to get setup things correctly

    Please follow this post that I did, that has worked for others, to get the printer connected to your wireless network. To restore the default settings of your printer network, please press the configuration option, then network, then restore default network, followed by Yes. So to print the Network Configuration page on your printer please follow the steps below:

    1. On the Control Panel, press the button ( ) next to Scan . The Scan/Wireless menu.

  • Printer HP Photosmart B109n-z problem

    Last week I bought a new printer, photosmart B109n-z, installed wireless on my PC and installed with the USB on my desk. All good works, earlier, I often lose my internet connection on my deskto. Have to unplug/plug the internet cable again in the assessment and to reset the router, then works again... But before the installation of the printer I never lost connection with the internet. Is there a solution for this? With the laptop, no problems...

    (router: US Robotics; operating system: Windows xp sp 3)

    OK, the US Robotics router is a DSL modem/router?  What is your or your ISP?

    We will set an IP address of the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.1.100 a.199 we will use 192.168.1.220
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Let the gateway and DNS white.

    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

Maybe you are looking for

  • Upgrade RAM not recognized by satellite A110

    I have a satellite A110-137 Partnr. PSAB6E-00Z013N5 I use win7 on this computer because it is more stable.I upgraded my memory to 2048Mb yesterday, but the computer will not register more than one chip 1024Mb. I tried to use chips in different locati

  • can I use in my studio 1737 laptop memory pc2-8500

    I have a studio 1737 with a t9600 clocked at 1 066 mhz, I want to know if I can use the laptop pc2-8500 memory clocked at 1066 or am I limited to using memory pc-6400 which I already

  • How to set printing without margins magin

    How can I set up printer to print a small MA on double sided page and also how to make boarderless photo prints?

  • BBM

    I have download this MDS Simulator from this link https://swdownloads.BlackBerry.com/downloads/browseSoftware.do and when I do still check according to this guide http://docs.BlackBerry.com/en/developers/deliverables/6338/Start_the_BB_MDS_Simulator_6

  • Custom pricing Windows

    I tried to run the assessment in the windows experience but he keeps failing because it cannot "measure the performance of video playback."  What should I do to overcome this obstacle?