How to install RAM

Similar Questions

• HP Pavilion: How to install RAM in a HP Pavilion Notebook - 15-p199sa (ENERGY STAR)

  Hi all need help to install my ram because there was no door RAM on the

  HP Pavilion Notebook - 15-p199sa (ENERGY STAR) one know how to install it? Thank you :-)

  Yes I know not how, but you won't like it. Here is the Service Manual:

  Manual

  Page 104. It requres removal of the top cover and also the removal of the motherboard. Not for the occasional laptop computer technician, I'm sorry to say. Post back if you want more help.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How check installed RAM memory and check the amount of memory RAM is consumed

  Original title: RAM used

  Is there a way I can check not just the RAM installed but used the rest of the memory used please what are the steps on the computer?

  Thank you

  Hello

  If I understand correctly you want to know how to check how much RAM is installed on your computer, as well as the way you want to check the amount of RAM memory is consumed by the computer. I will certainly help you with information.

  To check the amount of RAM installed, I suggest you follow the steps:

  • Click Start.
  • Right-click on computer and select Properties.
  • In the window system, under System properties, see installed memory (RAM) to the memory installed on your computer.

  To check the memory consumed by each program you can check by following the steps below:

  1. Open the Task Manager.
  2. On the performance tab, click on Resource Monitor.
  3. Under the resource monitor , you should be able to see the memory consumed by each program.

  

  To check the memory usage, see at the bottom of the Task Manager in the status bar where it says physical memory: xx %

  Hope the above information helps. Please keep us updated with the status of the issue to help you further.

• How to install RAM in HP Pavillion Sleekbook 14 b104au

  Hi, I have this flag sleekbook 14 which has AMD APU 31-1200 with 2 GB of RAM. According to the specifications, it has a slot for more free RAM to add memeory and I have not a compatible module of 4 GB RAM lying around. The problem is that I can't find a way to open this workbook. Pleas ehelp me out.

  Hello

  Very interesting, I answered a post there half an hour now it appears. Page 59 of the following guide shows you how to:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c03590565/c03590565.PDF

  Kind regards.

  RAM PS flight about may not work with your machine, you must have the good plug for it (also in the above manual).

• How to install more RAM (memory) in a Dell Inspiron E1505 laptop?

  Currently, my Dell Inspiron E1505 has 1 GB of memory (long live RAM). I would like to upgrade to 2 GB. Can someone give me directions step by step on how to install it? Thank you.

  
  

• How to replace RAM on Tecra M9?

  Hello

  Anyone can help explain how to replace RAM on my Tecra M9L - 12K. Returning more I can see the most obvious place where the RAM would be installed but there is only 1 slot SODIMM here. The other is where and how can I access this? Sorry if this is a thread answered elsewhere, but I can't find the answer - maybe you could move me if this is the case?

  Help gratefully received

  Please download the user manuals of the Toshiba support page under http://eu.computers.toshiba-europe.com > Support and downloads and see page 59. You will find detailed how explanations do.

• HP ENVY 14-2000 CTO beats Ed: how to install Mac os on my pc

  How to install Mac os el capitan on my pc

  HP ENVY 14-2000 CTO Beats Edition Notebook PC

  running window 10

  BIOS version f.0f

  64 bit

  CPU intel hd 3000

  8 GB ram

  no legacy in bios option support

  Hello

  I see that your computer should be a model from 2011. I could be wrong but HP computers once 2012 come with UEFI - I really don't know, but that's what I found on the Internet.

  If she says legacy, maybe it's just the BIOS that has no extension UEFI, or it coul be your BIOS/UEFI boot mode is set to Legacy mode

  Unified Extensible Firmware Interface (UEFI) is just the firmware code to a chip on the motherboard that provides additional functionality beyond the input/output system BIOS (Basic). UEFI is a way of doing things with your computer before loading the operating system. For example, UEFI can provide menus very graphics and information on a computer and a diagnostic system based on a computer and tablet. UEFI works with the BIOS to initialize the hardware before handing over control of the hardware of the operating system. UEFI can also load and display software storage devices to provide even more features, such as more detailed system information and extensive hardware diagnostics. More information:

  > http://support.hp.com/us-en/document/c03801890

  > http://support.hp.com/us-en/document/c04784866

  If your computer came with Windows 7 preinstalled originally, most likely your computer lacks UEFI because computers that came with 8 preinstalled Win and were supposed to be win 8 certified had UEFI + active SecureBoot.

  Regarding the original question, Apple Mac OS is only officially taken supported devices and hardware from Apple.

• computer laptop dv6-612tx of hppavilion: size of the installed ram

  I am Agnes... .i am using a computer hp pavilion dv6-612tx laptop... I have a size of ram of 4 GB of origin with the product... but today, recently I gave the lappy to a store aimed a cleaning after I got my lappy when I see the system information in my computer that I could see that the installed ram is 2.45 only...? My question is will show 4 GB ram ram of 4 GB installed or 2.45 only? Please tell me quickly

  Hello @Hemanth17,

  Welcome to the HP Forums!

  I read your post about the size of the memory installed showing incorrectly on your dv6612tx Pavilion laptop and wanted to reach out to you.

  At the right amount showing before you had the system cleaned? What's the memory installed value that is incorrect or available memory?

  If the system displays 4GB but 2.54 GB usable, the system recognizes that the memory is installed, but retains little memory for the physical operations.

  It is possible that the maximum memory is enabled. To change this, you need to go into the System Setup and check the Advanced tab startup options.

  You can also try the tests for a hardware problem or remove and reinstall the memory using the procedure described in the Service Manual (page 53) If you feel that there is a problem of physics with the memory.

  Please let me know how it goes. If this helps you to find a solution, please click on the button accept as Solution down below in this message.

  Thank you!

• I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.

  I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.   I had to replace the hard drive, so he has nothing about it and I added more ram, but I replace the cd player so it is not yet installed on the HP.   So I was wondering if I could put the installation disc in my laptop cd/dvd and connect computers by usb ports and install it this way and if not how can I?
  
  Thank you

  Hello

  You are welcome

  If the CD/DVD drive in the works of PC Gateway, you can (at least temporarily) remove it and install it in the HP, you can run your recovery disc and reinstall Vista.  Once everything is running on the HP, you can always remove the CD/DVD drive and reinstall it in the gateway PC if you wish.

  Kind regards

  DP - K

• W510 - install RAM

  Hi guys!

  I've had my W510 for about 4 months now, and I couldn't be happier. However, I recently bought 8 GB of ram (1 333 Mhz - 2 x 4 GB) to replace my current setup of 2x2gb 1066 Mhz.

  I found an installation guide on the Lenovos site that guided me very well. However, when they show how to install memory in slots under the keyboard, the video differs from my W510 (4319 - 29G) in a very annoying way. The location of the bottom is the song of the lower left corner of the laptop. Here are some photos I've taken "."

  Sorry for the blurry cam...

  Link to photo

  Link to photo

  No where on the Lenovo site, the hardware maintenance manual, or anywhere on the internet they mention this, so I don't really know what to do. The only solution I can think of is to follow the service manual and remove the entire top of the laptop, but I don't know if that could result in the cancellation of my warranty.

  in any case, this is why I write here... Someone at - he then seen before?

  Photos full resolution can be found at:
  www.rimeligraket.dk/ram3.jpg

  www.rimeligraket.dk/ram4.jpg

  Thank you...

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  Just thought I'd give you an update. The solution was to disassemble the entire top of the laptop and then remove the thermal protection (2 screws, nothing major) and once that is done, insert the memory. Fact. So it's just the reassembly of the machine which is easy enough.

  Works like a charm.

• HP 15-af008AX (N4F83PA): Im buying this laptop BACK to HP 15-af008AX (N4F83PA) how to install Windows!

  Hello

  I am, I ordered this laptop back HP 15-af008AX (N4F83PA),
  And I do not know how to install Windows on that and what I should install.

  (1) what should I install windows 8, 8.1 or 10 (which will be more compatible with the drivers)?
  (2) how to install it? Normal installation method will work? I mean I used to install the operating system from bootable USB key, this will work? & What is the key to start for this laptop.
  Installation of operating system after 3) what are the basic things that I do like installing drivers & what else?
  (4) some said in the review of this computer laptop v, they get only 800 ram frequency, while the HP describes it had 1600 frequency? What is a defect or what I need to change in the settings?.

  Please help as soon as POSSIBLE,
  Thank you!

  Hello @Thufail19,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I read your post about installing Windows and he wanted to help!

  As long as you have the product key for Windows, you can install via USB or the software disk.  Just follow the instructions on the screen.  You can check this site to see if your product is compatible with Windows 10: upgrade to Windows 10

  If you are not sure about Windows 10, then I recommend installation 8.1 Windows and recovery media creation.  You can use this document to help you, if necessary: HP PC - create a recovery Image on disk or save a recovery Image on a Flash drive (Windows 8)

  In this way, you can upgrade to Windows 10 If you choose, and if you are not happy with it, you can return to Windows 8. 1. once the operating system is ready to go, you can get the drivers you need for your product at the following site: drivers - HP for laptop - 15-af008ax

  Here are a few documents about 10 additional Windows:

  HP Notebook PC - upgrade to Windows 10

  HP computers - understanding and using Windows 10

  HP products - where to find Windows 10 drivers and software for my model?

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great weekend!

• Pre-installed RAM in a R60

  I bought my R60 about two years, with 1 GB of pre-installed RAM. Is there a way to check how much RAM is in each Bay without opening the device? (i.e. 512MBx2, one in each 1 GB, with an open Bay or Bay;)

  Well, you really don't fix the RAM sticks... just replace them.

  Even though I already know that some people would disagree... but that's how this issue is treated in most cases.

  I hope this helps.

• How to install and activate Windows XP after the upgradation of hardware

  I am using Windows XP SP3 and it is activated. I have the original and authentic installation CD
  with the product key in my possession. I plan to upgrade my hardware by replacing the HARD drive, motherboard, CPU.
  RAM and DVD player. Please inform how to install and activate the Windows XP to the new
  material configuartion. At the present time, I have no intention to migrate to the Windows 7 operating system.

  If you use OEM copy of windows XP, you will not be able to reactivate.  When you change the motherboard, you need a new license.

• How to install XP on HP Pavilion DV2710US... Please help me

  Hi all!

  I tried to install Windows XP on my laptop HP Pavilion DV2710US but no success.

  Please help me, how to install XP on HP Pavilion DV2710US.

  Thank you all

  HP Pavilion DV2710US

  -

  CPU AMD Turion 64 X 2 Dual-Core Mobile Technology TL - 60 2x2.0ghz
  (2 x 512 KB of cache L2, 1600 Mhz FSB)

  -

  RAM 2048 MB - up to 4096 MB

  -

  HARD drive 160 GB SATA 5400 RPM

  -

  LCD display 14.1 "WXGA high definition BrightView Widescreen Display (1280 x 800)

  -

  VGA nVIDIA GeForce 7150 M - up to 799 MB

  -

  Optics: Support of X drive with Double layer LightScribe Super Multi 8

  -
  -

  3 x USB 2.0, VGA, TV, RJ-11, RJ-45, IEEE 1394 firewire (4-pin) out
  Camera + microphone Built in

  -

  "Dimensions: 13,15" (L) x 9.33 "(W) x 1.02" (min H) 1.54 "(maximum H)"

  -

  Weight: 2.0 Kg

  -

  PIN: 6cel Li-ion

  -

  56K modem, NETWORK card

  -

  Intel 802.11abg wireless

  -

  OS Windows Vista Edition Home Premium

  Message edited by hoannh on 06/09/2009 09:16

  Dear Alex!

  It comes from overheating while using Vista. But no self closed.

  How to try to use the cooling package when installing XP.

  Currently I use XP SP2 CD to install. What version of MS for DV2710U? (SP1, SP2, SP3)

  Thank you for your support

• How to install AdventureWorks2008 and adventureworksDW2008

  Hello

  I use windows 7 ultimate, 32 bit, 4Gig ram, I tried to install adventureworks2008 and DW, I downloaded this 77 - zit as they say, I burned this thing on a disc, but nothing coming, how cam I do coz soon, I am writing to you that if someone has an idea correct it please I need help because I write 70-432 First, I would like to know how to install this things, I installed server management studio.

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

  MSDN forum

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

   

  Hope this information helps.