How to install some aplication CC in another folder the files to c:/pogram /?

Similar Questions

• How to install an hp LaserJet 1010 printer using the format of Windows 7?

  How to install an hp LaserJet 1010 printer using the format of Windows 7?

  Hello

   
  The hp LaserJet 1010 printer is not compatible with Windows 7. Visit the following links of Microsoft and hp for more information on this.
   
  Microsoft link
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-GB/search.aspx?type=hardware&s=HP%20LaserJet%201010%20&sort=ProductNameAsc&l=en-us
   
  link HP
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306507&lang=en&cc=us&prodTypeId=18972&prodSeriesId=306505&TaskID=135
   
  To work around the problem, you can try the following steps, however this may or may not help solve the problem.
   
  Install the drivers for HP 3050 and check. Follow the steps mentioned.
  a.Go devices and printers.
  b. Add a printer.

  c. Add a local printer
  d. use an existing port - for example DOT4 001
  e. choose HP 3050's driver in the list and install it.

• How to install Norton 360 2013 when I have the basics of microsoft security?

  How to install Norton 360 2013 when I have the basics of microsoft security?

  You will first need to uninstall Microsoft Security Essentials. You can't have two utilities Antivirus installed, they will conflict with each other.

  Uninstall or change a program - Windows - Microsoft

• How can I make an external (to another folder) link in the main menu?

  How can I make an external (to another folder) link in the main menu?

  Please see the discussion here Re: links to external websites Menu buttons>.

• Cant unninstall lightroom 5.4 required to install update 5.5, I remove all the files and registry, but install fails

  Cant unninstall lightroom 5.4 necessary to install update 5.5, I remove all the files and the registry, but installation fails again and again, now I can't use lightrrom... Grins.

  I use the SSD drive and I can't have a lot of file uninstal (often having to clean disk)

  Thanks for help

  Hello Jeff,.

  Thank you very much for your reply, I use windows 8.1! I found the problem: to install the new version installation needs the program old installation (but I have remove all the installer, because they use a place a lot on hard drive (SSD)).

  I have uninstall all Adobe and reinstalled, I save the full installer on an external drive. When the installer asked the former installer I indicate to programm my drive external and everything works fine now.

  Thanks so much for your help, I just do not delete the old file (sad having to save old installler just to install the new).

  Wallie

  (Sorry my English)

• How to install CS4 Design Premium on another computer, without internet or DVD player available?

  I was looking for Adobe Design Premium CS4 installed on my Surface Pro, but it doesn't have a DVD player and my Wi - Fi connection is not really fast. In fact, it would take a while to download a large file, leading me to find alternatives another (my other computer has already installed CS4, both are Windows). Is it possible to install CS4 on my Surface Pro, without the use of a wi - fi connection or no process incredibly complex? :) Thank you.

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  Follow the directions EXACTLY or it won't work.

  Bob

• How to use some entries of a txt as metadata file?

  If during my plugin development, I came across a problem.

  I created a txt for each photo file tell me who is in the pictures. If the first column in the file shows all the names that appear in the photo.

  I want to add those names in LR for each photo. I thought that their use as metadata would be a good idea. Then, I was able to let the user enter a name of a person and create a smart collection seen all the photos with this person in them.

  But its implementation is not as simple as that.

  So I started with the classic definition of metadata:

  metadataFieldsForPhotos = {}

  {

  ID = "nobody."

  title = "person".

  dataType = 'string. '

  Searchable = true,

  Browsable = true,

  },

  },

  Now I do not know how to read only the entries in the column of the txt file and displays all names appearing in it. Another problem is that each photo has its own txt file in "nameofphoto.jpg.txt" then LR needs to know what txt file belongs to a photo.

  I know that my question is not very accurate, but it would be great if someone could help me...

  This error message means that another plugin tries to access the catalog.  Maybe you had another instance of your plugin you have running and who was still running in the background?  You have installed other plugins that access the catalogue in the background?

  The first thing to try is to add a timeout parameter to, say, 15 seconds.

  In addition, you will discover soon enough that you must pass a Boolean parameter of catalogue: createKeyword() to return an existing keyword if it already exists.

• How to install a driver after you turn off the auto-update

  I disabled auto-update Windows Update drivers by following the instructions in the following article:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/disable-auto-install-drivers/61d02eb2-C131-44BF-b743-d614f0189cf2?TM=1347039132644
  It was due to the update of Windows Installer drivers on top of my existing bluetooth drivers and prevent the unit to work. I had to reinstall Windows to solve this, UN-installing then the installation of the Dell printer drivers did not work.
  I just bought a Freecom 2 to drive that connects via eSATA. Unfortunately, the instructions say that I don't need to install drivers because Windows will do it automatically! Ugh.
  I am reluctant to turn to the auto-update as it will probably destroy bluetooth again. So the question is: How can I install Freecom drivers and the problem of bluetooth do not breed take the risk?
  Note: Looking at the dialog box "want you Windows to download the driver software? ' there is an option to" install the driver software from Windows Update if it does not appear on my computer.
  Well well... driver Dell bluetooth software is on my computer (the software to install, it is on my C: drive and it is also installed) so not preventing him to get the version of Windows Update? I am concerned about the confidence that, given that the driver has been installed also the last time he downloaded the MS driver (although the auto-update feature was turned on at that time here). I'm afraid to think that the Dell driver's oldest (who is) and so he gets crushed.
  Thanks in advance.

  "the fact that the manual says that he needs a driver to be"automatically installed by the operating system"suggests that... he needs Windows Update."

  (1) while I don't have an external HARD drive in a box I have a case of a slot for external e-SATA replaceable hot which is about the same as a commercial external HDD, but without the box.
  When I plug in a HARD drive into the slot in Windows automatically detects the drive.
  Windows should automatically install the drivers for basic/generic for most of the devices when it detects something new just to be attached/connected. Once Windows did, this 'device' must be posted from there on.
  This is not the same thing as let the Windows updates to install the drivers.

  So, when you plug in the external hard drive on e-SATA port, the first time Windows pops up a similar message to-"new device detected... the driver installation, you can check if the device is detected and drivers are installed by going to computer management > Device Manager to see if your external HARD drive is on the list of hard drives."
  If non - R / click on hard drives and click "search physical changes.
  There is also an option here to update the drivers.

  You are quite correct disable optional updates.
  It is not a recommended option, especially for the graphics drivers and chipset.
  Personally, if the mfg of the material provides drivers on their website always download and install the drivers manually.
  As a result of that it is prudent to updated Windows configuration only updates are available so you can choose which you want to install and choose to install it on your own time inform.
  This way you can close applications and browsers and better to avoid the possibility of corruption updated leaving the priority update. It is also
  more course with a clean install of Windows to start with sp1, and then do the other updates in small batches.

  2. when the HARD drive is connected and recognized in the Device Manager are moving
  for the computer management > disk management. This shows the good
  for HARD drive capacity?
  If the HARD drive has only a small partition and unallocated space that is perhaps why only a small capacity is shown elsewhere.  You can format the HARD drive and
  create a new Partition or Partitions here.

  "b if I uninstall/remove device, then as soon as I tried to install the driver from the manufacturer it seemed to install ok, but... still bluetooth didn't work." It simply detects all devices everything I tried. »

  Have you tried the fix .NET? .NET can be damaged and should be
  updated in all cases.
  It's been awhile, so I don't remember why (safety improvement?) but I uninstalled .NET and reinstalled with. NET4.
  DOWNLOAD: Microsoft .NET Framework 4 (Web Installer) - Microsoft Download Center - Download details

  .

• WHERE to download and how to install windows 8 oem and register with the key from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  See here, make sure you download the correct edition:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

• How to install a plug-in to create an .ico file

  I'm new to Photoshop, I CS6.

  I want to create an .ico file, I understand that I need a plug-in to do it, where can I find the plug-in to install?

  Also, I went along in circles trying to find out how to install a plug-in. I have not found the help pdf file very useful on the subject.

  Thank you for any help.

  Try

  http://www.Telegraphics.com.au/SVN/icoformat/trunk/dist/Readme.html

• How to change some wrong spelled words scan to PDF files

  I received an email and found out there is that an important message misspelled how modify this one?

  This spelling does that to comments and form fields, it does not apply to static text in the file. And you cannot correct misspellings in a scan anyway, unless you run OCR (text recognition) on this topic first.

• When you attempt to install error Street travels and maps is the file is corrupted

  I can't fully extract free street maps and Microsoft travel 2010 evaluation edition. I get to the end and when almost done it says that the file is corrupted. I can't ask microsoft do anything without having to pay. It's sad, especially in this time of recession, we can report a problem without having to pay. Shame on Microsoft. I want to give my email but they do not like and delete so I'll try this way. Please help me, anyone, anytime by going to the hotmail Web site and typing in busmanonthego first.

  Thank you and God bless.

  Try to download another copy and save it to your desktop (do not use Run to proceed with the installation).  Then try to install it from there.  The original downloaded file was perhaps actually corrupted.  BTW, happens to mention the name of the corrupted file?

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• While trying to install windows 7 pro 64-bit, as the files to try to finalize an error message appears and says that windows cannot manipulate files to work with the hardware in my computer

  Original title: Win hardware problem. 7 PRO

  Trying to install windows 7 pro 64-bit, and while files are trying to finalize a message error shows up and says windows can't handle files to work with the hardware in my computer.

  The only thing I can think is that maybe the Mobo is not compatible with windows 7, do not answer on the Asrock web page.

  -Asrock Fatal1ty killer FM2 + Mobo. Processor AMD Athlon X 4 860 K. RAM Corsair 2133 (executed in 1866)

  Or they are corrupt, try to get a new copy and try again.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• How can I write snapshot of my data to the file measured every 5 seconds

  Hello

  I try to take a snapshot of my stream once every 5 seconds and write it to a. File LVM. I have problems with the VI "write to a measurement file. The pace at which it writes data to the file seems to be dictated by the 'Samples to Read' parameter in the DAQ assistant. I tried placing the VI 'Write in a file measure' within a business structure and the launch of the structure to deal with a "time up" VI. As a result only in a delay of 5 seconds before the insiders 'Write in a file as' VI. Once the VI 'Write in a file as' is launched, it starts writing at 20 x per second. Is there a way to change it or dictate how fast the exicutes VI 'Write in a file measure'?

  My reason for slowing down the write speed are, 1) reduce space occupied by my data file. (2) reduce the cycles of CPU use and disk access.

  The reason why I can't increase the value of 'Samples to Read' in the DAQ Assistant (to match my requirement to write data), it's that my VI will start to Miss events and triggers.

  I don't know I can't be the only person who needs high-frequency data acquisition and low-frequency writing data on the disk? However, I see a straight road to key in before that.

  The equipment I use is a NI USB DAQ 6008, data acquisition analog voltage to 100 Hz.

  Thanks in advance for your help

  See you soon

  Kim

  Dohhh!

  The re - set feature has not been put in time elapsed VI!

  Thank you very much!

  See you soon

  Kim

• How to stop ghost backups in Windows Vista? The file is very large and cannot be defragmented.

  Hello.

  My friend has a computer with Windows Vista. Apparently, there's something that automatically done 'Phantom' backups out to "system restore." Which is an application of Windows Vista, or can only be linked to the software when Norton Internet Security has been uninstalled.

  This file is a very large file and cannot be defragmented. So, right now the computer shows it's 54% fragmented. Part of the name of the file is "Volume Information."... »

  Please, let me know how I may be able to stop these unnecessary backups. Onbly regular system restore is necessary.

  Thank you in advance,

  José M Romero

  This function called cliché instant and is a useful feature, take a look at:

  http://Windows.Microsoft.com/en-us/Windows-Vista/previous-versions-of-files-frequently-asked-questions

  If you want to get more space, you can use the cleaning disc and free up space in your hard drive.

  You can run disk defragnment to solve your problem to fragnmentation.