How to install the new NIC in ESX 4 without having to rebuild?

I have a server ESX 4.0 (u1) running with a NIC card double port gig.

I need to replace the network adapter with a quad port NIC dual port.

I prefer to install the new NIC card and do not have to reinstall ESX for her to see the map.

Can you give me any advice or point me to the documentation that describes how to do this?

Thank you for your help.

If the new NETWORK adapter is on the HCL, simply turn off and install the card NETWORK. No reinstallation is required.

Supported Community, community rewarded - do questions answered and allocation of points for the job of marking. It helps us all.

Tags: VMware

Similar Questions

  • I use two different versions of Firefox for two different employers - how to install the new version without losing an old?

    An employer requires that I use Firefox 3. The other requires that I use the most recent version. How to install a new version of Firefox to another path without overwriting the old version?

    The best way to have a version be an installation of Firefox Portable. The mobile facility is autonomous and will not affect your installation of Firefox "ordinary".

    http://PortableApps.com/apps/Internet/firefox_portable

    Otherwise, you will need to set up a profile specifically for version 2 and make sure the correct profile is launched in each version.

    http://support.Mozilla.com/en-us/KB/managing+profiles

    http://KB.mozillazine.org/Shortcut_to_a_specific_profile

    Overall, you are probably best to replace your current version of Firefox 3.6.25 with Portable Apps - http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 - version and install Firefox 9.0.1 that your installation "regular".

  • HP Touchpad ~ how to install the new battery?

    How to install a new battery for my dead touchpad? Finally an I tried to open and ended up breaking a bunch of clips and buttons.

    The TouchPad does not have a device that is not repairable.  However, Google is your friend and comes to success like this, which includes a link to a repair of third-party 'guide '.

  • How to install the new BBM blackBerry smartphones

    I tried to find a way to install the new BBM 5.0, but can't seem to understand. I am new to the blackberry world (3 days) and I got an old 8703e that is now configured on my line of personal relationships.

    So I've updated the software (desktop and blackberry), but it said that my BBM is updated to 4.2.1

    I'm on the outskirts of Bell to the Canada and can't do no matter how hard I try. If I go on blackberry Appworld, it cannot be downloaded any other way except by browser, which I don't have, I have only the email and BBM on my Blackberry. Am I stuck without internet for browse and locate this program?

    To use install and use BlackBerry Messenger v.5:

    • A data plan from your wireless service provider
    • A smart phone BlackBerry with 64 MB of memory
    • 2.4 MB of memory available smartphone
    • BlackBerry® Device Software v4.5 or later version
  • How to install the new software Adobe Reader after the latest version of misinstalled?

    Hello, community. May you have a great day.

    My question is this. Latest version of Adobe Reader in my PC has been X MUI, and he has been installed from an external drive G. For this reason, I could not uninstall this version before trying to install the new version 11. And I have to delete it manually delete it is the main folder of my Applications folder. It's all I can not install the new version.

    Thank you now for your attention. Rafe Dominguez, Villahermosa, Mexico.

    Hello Rafe,

    You can try to use this tool first remove all traces of your computer:

    http://labs.Adobe.com/downloads/acrobatcleaner.html

    Then you can download the complete player offline installer from

    http://get.Adobe.com/reader/Enterprise/

    After downloading, restart your computer and run the Setup program before anything else.

  • Can you build a new version of an exe without having to rebuild its installer later?

    I'm currently testing an exe LabVIEW-built on a PC without installed LabVIEW. Whenever I go back to the development PC to fix a bug / change something, and then rebuild the executable file, it seems that I must also rebuild its installer which takes considerable time.

    Is it possible to rebuild an executable without having to rebuild its installer? Or a way to tell the installation program that he didn't need to be completely rebuilt, but rather just has to look at the new executable?

    After writing this, I realized it probably isn't a way to do it, but it's worth a shot.

    Christian.

    If you remove all the additional installation programs of your build spec, you should end up with a fairly compact to build installer.

    I usually a specification of construction to complete installation, then a spec to build for the patch install.  When I make just a small change and know that the application will be distributed only on a computer that already has the EXE, I just rebuild the hotfix installation program.

    For major releases, I will rebuild the full installer.

  • How to manually configure the IP, subnet, gateway on the new NIC in ESX Server 3.5

    Hello, first let me say that I am relatively new on ESX Server and so the question I ask here may seem trivial but I looked through the documentation and other threads and that you have not found quite what I'm looking for.

    I have an ESX Server 3.5 with a number of production virtual machines running works very well.  I need to install a second NETWORK adapter because my use of the network will go through the roof, once I convert a production server used in a virtual machine on this machine.  I have a server Dell PE 2950 and I bought an Intel Pro/1000 PT dual port PCI-e adapter that is on the list of hardware supported.  In the reading I did, every reason to believe that when I set up the server, the new network cards will appear in the VIC where I can assign to a new Vswitch and so forth, so I get it.  What I don't see in the VIC is a way to specify the NETWORK adapter settings.

    The problem is that the switch I connect to, put in place by our network management staff, will not be DHCP settings of NETWORK card for me, I have to manually configure the IP, subnet and gateway until I can start talking.  When I initially installed ESX, I was able to provide all parameters of NETWORK card installation - which is not the case now with the new NETWORK card and the operating system all this up and running.  How do I do this?  Thanks for any help.

    ... BillH

    Adding another physical NETWORK card to your vSwitch will make this new Teddy to comply with policies of vSwitch.  In particular, the load balancing algorithm will determine how the additional bears will get used.  By default, this is done with switch port ID.  This means that each vm NIC that feeds, will choose the next available bear to talk about.  The virtual NIC will essentially be Robin and choose the next Teddy online to talk it through and will so remain like that until a failure condition occurs, or the virtual machine is restarted.

    If you know a particular VM is a high user of I/O, and you want to separate its traffic from the rest of your virtual machine, and then create a new portgroup on vSwitch0, assign this new portgroup 3rd Teddy and use the other two as before.  In addition, in your regular exchanges, remove or make sleep 3rd Teddy.  In this way you completely isolate the heavy vm from the rest of your systems.

    -KjB

    VMware vExpert 2009

  • Satellite 5205-S505 - how to install the new OS after replacing HARD drive

    Hello.

    Installed a new hard drive. How to install an operating system?

    I thank.

    Hello

    You have a Toshiba Recovery disk?
    If so, then start on this disc.
    The installation process should start automatically and you must follow the instructions on the screen.

    If you n t have such recovery disc, then you will need to use a Microsoft Windows disk in order to install the operating system.

    Satellite 5205-S505 is a series of laptop Toshiba us and old drivers can be found on the Toshiba U.S. driver page:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  • How to install the new motherboard in my XP computer?

    I need to install a motherboard in my computer, because there is a visual memory card small is 95.0 MB and I use my computer for gaming and I need a new motherboard because there is no slot for graphics card graphics card is integrated and I don't have $400 - $800 to spend on a new computer that I was hoping that some on help me and if you can it would be greatly appreciated thanks.

    * original title - anyone know how to install a motherboard? *

    Hello

    See the bottom of the article that contains information about the replacement of the motherboard.
    How to replace the motherboard on a computer that is running Windows Server 2003, Windows XP or Windows 2000
    http://support.Microsoft.com/kb/824125
    Before replacing the motherboard I recommend you back up the data on the hard drive.

    How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
    http://support.Microsoft.com/kb/309340
    After replacing the motherboard, you'll have to do a upgrade on the spot to boot to the desktop.

  • How to install the new HDD on Satellite M70?

    Hi, I have a Satellite M70 PSM75E, I want to move a hard drive of 250 GB, can give me instructions how to install and what type of disk HARD inface do I go?
    Your help is appreciated

    Hello

    It is difficult to say if the 500 GB will work in this good old classic... I think that 250GB should be sufficient for all applications you want to install.

    However, you could try the 500 GB. If it doesn t work you can bring back to your computer store or you can test it directly in the shop. Then you'll know if it of an option for you or not. Be creative! ;)

  • How to install the new BIOS for Satellite Pro M50 under Ubuntu

    I am running Ubuntu on my M50 Pro. Could someone advise me what is the latest BIOS and how to install it?

    The update of the BIOS here site seems havean exe file but I couldn't see the BIOS file to the breast?

    Thank you

    Why do you want to update the BIOS?
    You have any big trouble with your laptop?

    The European driver Toshiba page provides BIOS BIOS for Vista and XP.
    Both versions of the BIOS must be completed while the operating system is running!

    If you use Linux on your laptop, you will not be able to update the BIOS!
    Do you understand?

    Once again; Updated the BIOS should be carried out ONLY if it of absolutely necessary. In other cases don't update!

  • How to install the new hard drive on PowerMac G5

    How it installs a new hard drive on PowerMac G5?

    I have a number of readers of the previous Mac that can fit in this PowerMac G5, but I don't know what - if anything - is necessary to make them fit. Or guides, assistance would be appreciated.  Thank you!

    You need a 3.5-inch SATA drive. Concerning how to swap the drives you can use these instructions to fixit. You can skip step 4 that this plastic cover does not need to be removed. https://www.iFixit.com/Guide/Power+Mac+G5+hard+drive+replacement/1952

  • How to install the new media player

    My media player has messed up, when it plays music, it does not play regular songs for some reason, it's playing as they are a type of mixed song. I can solve this problem?  Or should I just re - install a new version?

    Click Start, type toggle windows feature tour

    Press enter

    Extend the functionality of media

    Uncheck Windows Media Player

    Click OK

    Restart when prompted

    Click Start, type toggle windows feature tour

    Press enter

    Extend the functionality of media

    Check Windows Media Player

    Click OK

    Restart when prompted

    Try to play again.

    If the problem persists:

    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: sfc/scannow

    This will check for any breach of integrity

    Restart your system

  • How to install the new power supply?

    OK firstly plug...

    Motherboard (motherboard): N-Alvorix-RS880-formfat (Alvorix)

    PC: HP p6703w

    new power supply: GS600

    new game card: evga gtx460

    OK I am experianced abit but still novice when they treat the upgrade myself. So here's my question...

    The mobo has a slot for 24pin power cable, but the current 250w ps uses a 20 pin in this slot. Is it safe for me to use all 24 pins for the ps (GS600) I want to? What was the reason why hp has used a 20 pins on this mobo? I don't want to fry my mobo. Laughing out loud.

    Thank you.

    Welcome to the HP Forum!

    ricofico wrote:

    OK firstly plug...

    Motherboard (motherboard): N-Alvorix-RS880-formfat (Alvorix)

    PC: HP p6703w

    new power supply: GS600

    new game card: evga gtx460

    OK I am experianced abit but still novice when they treat the upgrade myself. So here's my question...

    The mobo has a slot for 24pin power cable, but the current 250w ps uses a 20 pin in this slot. Is it safe for me to use all 24 pins for the ps (GS600) I want to? What was the reason why hp has used a 20 pins on this mobo? I don't want to fry my mobo. Laughing out loud.

    Thank you.

    It is safe for you to install the connector 24 pin. You are miscounting the pins on your motherboards ATX connector. The following image is your motherboard. I count 24 pins. Product specifications for your PC State that the PSU is ATX spec.

    Kind regards
    ERICO

  • CS 5.5 does not appear in the purchased programs? How to install the new computer?

    I recently bought a new computer and I would like to transfer all my CS5.5 programs to the new machine. I disabled the already on the old machine. However, when I go to MyAdobe to upload them to the new computer, nothing shows up as available for download. Where are my programs and how can I access them?

    Hello

    Please Download CS5.5 products

    Kind regards

    Sheena

Maybe you are looking for

  • Comparing two digital channels or waveform

    Hello How to compare two digital channels or the y-axis of the same lengths waveform channels and find the line that has about the same value in the channels. For example, suppose we have two digital channels X and Y which has about the same value in

  • How to format the drive "C"?

    How to format my 'C' drive which is clear of all my files and programs? I want to sell my computer but don't want anything of mine on the disc.

  • half page printing. ALSO NOT PRINTING text on the email I need

    all that does not print only prints on half the page. When I print an email, it prints the 1st sentence, but not the list it simply prints the backgroundbut not the text I need.                                         Stublina

  • How to get the toolbar of the browser

    my main browser/taskbar at the top is missing?  Help me please! original title: my browser/Tasks/menu which is usually in the top bar (where you can hit, discovers, file, save as etc. is gone! How can I get it back? __

  • Cursor jumps when entering

    If you type problems.__Since the upgrade to windows 7, my cursor keeps jumping when I type. In the middle of a Word, he jumps back in the middle of a previous sentence. __Can help you! Since the upgrade to windows 7, my guard slider on jump when I ty