How to install the software on a dvd

I'm reading the dvd provided with my new printer and I don't know where it is read. The dvd appears just back after a few minutes.

I had a similar problem with my hard drive.

Check if all other discs work when you put them in your hard drive.

If they are, your disk drive may not be possible to read the DVD provided with the printer (it cannot be done for Mac etc.)

If the other drives do not work, your hard drive may be defective. Take your Mac to an Apple Store and ask them to study the problem for you.

Tags: Mac

Similar Questions

  • I currently have Adobe Pro XI, but I get a new laptop, how to install the software on the new laptop computer

    I currently have Adobe Pro XI, but I get a new laptop, how to install the software on the new laptop computer

    Hi Victor,

    If you are referring to Acrobat Pro XI, you can download and install from here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X

    Kind regards

    Rahul

  • How to install the software VPN 3rd party to R700?

    I'm trying to find a way to install the software VPN 3rd party to my router? NordVPN. I'm not sure how to proceed. Any advice?

    Griff

    No 3rd party software installs with stock firmware.

  • How to install the software pre-installed on dm1-4118au?

    I have a pavilion dm1-4118au that comes with windows 7starter kit. I upgraded the memory to 4 GB and installed windows 7 ultimate. How can I install the software pre-installed?

    (1) more simple to get this working is machine to recover from drive D by pressing f11 when the computer starts.

    (2) install OS using the media created by you (incase you have created the media before formatting the computer or OS currputs). Start with 1 disc, and follow the steps to install the operating system.

    If you have already formatted the computer and there is no D drive or drives more.

    (3) order support from HP HP recovery and install the OS using these disks. Here's the link.

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

    Please be informed that recovery is going to re install the operating system, drivers, and applications. in this process, you lose all the data on your computer, please take care of the data before you start the recovery process.

  • How to install the software on host ESXi 4?

    I would like to analyze using Nagios my ESXi 4 server through the remote console shell, but there are a few hiccups with the Linux environment in that esxi is available:

    • There is no installed gcc
    • No like yum or apt - get package manager
    • Can't find that associated with this version of RHEL RPMs

    So I am puzzled because I find inappropriate for this version of RHEL RPM, and when I want to compile I can't because there is no gcc. Clues? It's with Nagios using ERS, but if I have to use SNMP I will go this route.

    Linux build: (Linux version 2.6.18 - 128.ESX ([email protected]) (gcc version 4.1.2) #1 Fri Oct 15 16:11:16 PDT 2009 [generation of Console of Service ESX 201756)

    Welcome to the community - first ESXi is not Linux - the VMkernel is developed by VMware - it is not recommended to install the software on your ESXi host unless it is specifically design for ESXi - so unless Nagios has developed an agent for ESXi you won't be able to install it.

  • How to install the software on a virtual computer

    Have VMware VCentre, and now I have to install the software in virtual machines, I've created several virtual machines.

    You can't see vmx in Windows, this file is located in the storage. To see this archive to go to vsphere host with VI Client > Configuration > storage > DataStore browse when this virtual machine is.

    In the virtual machine summary you can see where is this virtual machine in storage volumes.

    Please, do not forget the points of call of the "useful" or "correct" answers

    Mauro Bonder - moderator

  • My hard drive crashed and I need to re - install Adobe Acrobat.  I have the serial number of the previous installation.  How to install the software all over again?

    My hard drive crashed and I need to re - install Adobe Acrobat Professional.  I have the serial number of the previous installation.  How can I download the software from the Adobe web site?

    Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

    Acrobat 9: 8 - http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html

  • Qosmio F20-136: how to install the software update for DVB TV device?

    Hi, I used the update all the drivers for my qosmio f20 136 11/07/06 and received various pilot updated on the list.
    The file called TV-TUNER-QF20-XPMCE-103250526 at startup allows the pilot to TV TUNER directory listing and seems to be once I was the driver under System section and selected update driver and select this directory.

    My question is the another file called DVBTAHYB-QF20-XPMCE-1051340 when I click on the file that I just get a list of files, when I try the My TV driver update and choose this directory it won't find anything, does anyone know how to install that to update the file. The download list says they are two updates of tv pilot.

    Maybe Toshiba could include a text file explaining in detail how to install these files? Can anyone help please. And nobody knows which file to copy to save a permanent channel registration, so I could re install the file in the directory so lost the complete channel list?

    Thanks in advance.

    Hello

    Maybe I understood something wrong, but according to the prudence shown on the Toshiba download page, the TV-TUNER-QF20-XPMCE-103250526 driver is designed for the range of models between F20-101 and F20 - 135.
    Are you sure that this disc is designed for your computer model laptop too?

    Have you tried to install the update of dvbtahyb-qf20-xpmce-1051340 when the original pilot of the TV (factory settings) is preinstalled?

  • HP Pavilion dv6-6c14nr: how to install the software on HP Pavilion dv6-6c14nr

    I had to reload a HP Pavilion dv6-6c14nr with Windows 7 Professional.   Also, I need to install Microsoft office.  I have the installation discs to install the programs and licenses.

    Question using an installation CD the same process as with Dell computers.   Dells you choose F12 and select the CD drive and start the installation on the CD.

    I already know that there is the partition of re - install that can be used to recover a broken BONE, but if this OS is not the one you want, then you must install the version of the OS from the CD you want, format the drive as part of the installation and continue on the it.

    Once again my question is simply the key F12 serves the same function on HP laptops.

    Thanks in advance

    Wlamore

    Hello

    No, F12 will not work on HP laptops. For Windows, please reboot your machine, it will display the key options you must hit to allow you to select where. Please select the DVD/CD player.

    You can install MS Office like any normal installtion process.

    Concerning

  • How to install the software?

    FrameMaker is not in the application to the cloud, how to install it?

    You must first download it and install it then: FrameMaker Trial Download

  • Portege 4010: How to install the cd - r or dvd - r?

    Anyone know if I can change the slimbay on my portege 4010 on a CD - R, or ideally a DVD-R?
    If so, what are the best places to get these?
    (I live in the United Kingdom)

    Thanks for your suggestions,

    Ian

    Hello

    I found the info this Portege comes with two discs. Readers are:
    Toshiba (SD-C2502) and TEAC (DV28E-B).

    I put t really know if any DVD-R/RW drive is compatible, but you can contact the Service of your country partner and ask them. They are usually updated hardware and should have enough experience.

    Otherwise, try to find a few upgrade for laptop shop in your country.

  • How to install the software on a virtual machine?

    Hi, I'm new to the virtual machines.  I have a physical server running windows 7 pro 32 bit, and I set up a virtual machine running Windows 7 Pro 64-bit only.  I created so I can run MS Exchange Server 64.  I have a .iso for Exchange Server file, but I can't figure how to get it in the virtual machine.  Please explain or direct me to a good tutorial, thank you.

    In this case, either use the "shared folders" feature or share the folder on the host computer with files and map it as a network drive in the comments.

    Another option - although that do not know if it works in VMware Server - is to drag & drop the files from the host to the virtual computer.

    André

  • I bought lightroom a few years ago now, I have a new laptop. How to install the software again

    can you help me please

    what I download

    where can I find

    Lightroom - all versions

    Windows

    http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

    Mac

    http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • Re: How to install the backup software?

    I have Toshiba Recovery DVD for Windows XP of origin. But after the installation in backup softare avialble in system tools.
    I tried to install it from adding a program into the Panel control or extarct from the DVD. Also, I tried to download it from the Microsoft Web site, but there is no chance.

    Can someone tell me how to install the backup software?

    Concerning

    Check http://support.microsoft.com/kb/308422
    Maybe this article will help you.

  • The product key label is worn and missing two numbers. How can I get back them so I can re - install the software?

    missing numbers

    The product key label is worn and missing two numbers. How can I get back them so I can re - install the software? The hard drive broke down.

    Thank you.

    How to identify, locate, and replace a product key
    http://support.Microsoft.com/kb/811224

Maybe you are looking for

  • Custom PCB connection

    Hi all I use the NI SMU-6363 map to control my measurement sequence. The only way to get the signals input/output to the card is through the SHC68-68-EPM cable using the SCB-68 screw terminal has. However, the Terminal screw requires a lot of space u

  • Backup LINE 86/89

    someone has an OTA2/2.5, the LINE, backup CWM? Thank you

  • Sign of bump on the right side when you click on it?

    My Control Panel will fly to the right of the screen when I open it. I can't get back to the surface on the screen.

  • How to reduce the number of COD generated files

    Hello Im a noob to the development of bb. IM currently using Java plug-in in eclipse to generate/sign the COD files. Although they work fine on the device, I could see that a number of files are generated - cod cod around 16 files as well as the jar

  • NullPointerException on new screen

    Hello I created a menu item custom to launch a new screen. When I try it on the Simulator, I get a null pointer exception. The run method of the menu item: public Object run(Object context) { UiApplication.getUiApplication().pushScreen(new ExtendedMe